교원프로필

이건홍 사진
교원에 대한 정보를 나타내는 표입니다.
성명 이건홍
소속 화학공학과
전화번호 279-2271
E-mail ce20047@postech.ac.kr
Homepage http://ce.postech.ac.kr/eng/index.php

학력

  • 1982~1986 UNIV. OF DELAWARE (박사-통계역학)
  • 1979~1981 한국과학기술원 (석사-화학공정)
  • 1975~1979 서울대학교 (학사-화학공학)

주요경력

  • 1997~2003 : INRS-Energie et Materiaux
  • 1992~1992 : Kyushu University 화학공학과
  • 1987~1988 : Univ. of Delaware 화학공학과
  • 1986~1986 : University of Dortmund 화학공학과
  • 1982~1987 : 두산식품주식회사
  • 1981~1982 : 전 엔지니어링 주식회사

전문분야

  • 양극산화알루미늄 나노템플레이트
  • 탄소나노튜브
  • 실리콘 나노와이어
  • 가스하이드레이트
  • 마이크로웨이브 화학반응

학술지

국제전문학술지

  • Gas hydrates phase equilibria for structure I and II hydrates with chloride salts at high salt concentrations and up to 200 MPa, JOURNAL OF CHEMICAL THERMODYNAMICS, , 117, 27-32 (2018)
  • Accurate measurement of specific tensile strength of carbon nanotube fibers with hierarchical structures by vibroscopic method, RSC Advances, , 7, 8575- (2017)
  • Utilization of carboxylic functional groups generated during purification of carbon nanotube fiber for its strength improvement, Applied Surface Science, , 392, 342-349 (2017)
  • Evolution of implanted Fe ions in SiO2/Si wafer into uniformly sized catalyst particles for carbon nanotube forest growth, CARBON, , 123, 122-128 (2017)
  • Synthesis of carbon nanotube fibers from carbon precursors with low decomposition temperatures using a direct spinning process, CARBON, , 124, 219-227 (2017)
  • Gas hydrate formation from high concentration KCl brines at ultra-high pressures, Journal of Industrial and Engineering Chemistry, , 50, 142-146 (2017)
  • Gas Hydrates Phase Equilibria and Formation from High Concentration NaCl Brines up to 200 MPa, Journal of Chemical and Engineering Data, , 62, 1910-1918 (2017)
  • Quantification of the risk for hydrate formation during cool down in a dispersed oil-water system, Korean Journal of Chemical Engineering, , 34, 2043-2048 (2017)
  • Quantitative analysis of carbon nanotube cross-linking reactions, Korean Journal of Chemical Engineering, , 34, 898-902 (2017)
  • Photoacoustic effect on the electrical and mechanical properties of polymer-infiltrated carbon nanotube fiber/graphene oxide composites, Composites Science and Technology, , 153, 136-144 (2017)
  • Improving the tensile strength of carbon nanotube yarn via one-step double [2+1] cycloadditions, Koream Journal of Chemical Enginnering, , 33, 299-304 (2016)
  • Synthesis of carbon nanotube fibers using the direct spinning process based on Design of Experiment (DOE), Carbon, , 100, 647-655 (2016)
  • Facile conversion of activated carbon to battery anode material using microwave graphitization, Carbon, , 104, 106-111 (2016)
  • Full graphitization of amorphous carbon by microwave heating, RSC Advances, , 6, 24667-24674 (2016)
  • Enhancement of fracture toughness of hierarchical carbon fiber composites via improved adhesion between carbon nanotubes and carbon fibers, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, , 71, 72-83 (2015)
  • Synthesis of high-quality carbon nanotube fibers by controlling the effects of sulfur on the catalyst agglomeration during the direct spinning process, RSC ADVANCES, , 5, 41894-41900 (2015)
  • Plasmonic colloidal nanoparticles with open eccentric cavities via acid-induced chemical transformation, NPG ASIA MATERIALS, , 7, - (2015)
  • Enhancement of fracture toughness of hierarchical carbon fiber composites via improved adhesion between carbon nanotubes and carbon fibers, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, , 71, 72-83 (2015)
  • The influence of boundary layer on the growth kinetics of carbon nanotube forests, CARBON, , 93, 217-225 (2015)
  • Strategic planning design of microalgae biomass-to-biodiesel supply chain network: Multi-period deterministic model, APPLIED ENERGY, , 154, 528-542 (2015)
  • Gas hydrate inhibition by perturbation of liquid water structure, SCIENTIFIC REPORTS, , 5, - (2015)
  • Effects of Promoter on the Formation of Gas Hydrate from Blast furnace Gas, Korean Chemical Engineering Research, , 53, 103-110 (2015)
  • Research Update: Strategies for efficient photoelectrochemical water splitting using metal oxide photoanodes, APL Materials, , 2, - (2014)
  • The synthesis of single-walled carbon nanotubes with narrow diameter distribution using polymerized hemoglobin, Carbon, , 69, 588-594 (2014)
  • Abnormal incorporation of amino acids into the gas hydrate crystal lattice, PHYSICAL CHEMISTRY CHEMICAL PHYSICS, , 16, 26730-26734 (2014)
  • Microwave heating of carbon-based solid materials, CARBON LETTERS, , 15, 15-24 (2014)
  • Aqueous Solution Route to Zinc Telluride Films for Application to Artificial Photosynthesis, ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, , 53, 5852-5857 (2014)
  • An exceptionally facile method to produce layered double hydroxides on a conducting substrate and their application for solar water splitting without an external bias, ENERGY & ENVIRONMENTAL SCIENCE, , 7, 2301-2307 (2014)
  • Anion-doped mixed metal oxide nanostructures derived from layered double hydroxide as visible light photocatalysts, Advanced Functional Materials, , 23, 2348-2356 (2013)
  • Synthesis of high carbon content microspheres using 2-step microwave carbonization, and the influence of nitrogen doping on catalytic activity, Carbon, , 60, 307-316 (2013)
  • Hydrophobic amino acids as a new class of kinetic inhibitors for gas hydrate formation, Scientific Reports, , 3, - (2013)
  • The reason for an upper limit to the height of spinnable carbon nanotube forests, Journal of Materials Science, , 48, 6897-6904 (2013)
  • “Continuous” method for the fast screening of thermodynamic promoters of gas hydrates using quartz crystal microbalance, ENERGY & FUELS, , 26, 767-772 (2012)
  • Morphology-controlled synthesis of CuO nano- and microparticles using microwave irradiation, KOREAN JOURNAL OF CHEMICAL ENGINEERING, , 29, 243-248 (2012)
  • Synthesis of single-walled carbon nanotubes using hemoglobin-based iron catalyst, CARBON, , 50, 722-726 (2012)
  • Turning refuse plastic into multi-walled carbon nanotube forest, Science and Technology of Advanced Materials, , 13, - (2012)
  • Gas-Hydrate Phase Equilibrium for Mixtures of Sulfur Hexafluoride and Hydrogen, Journal of Chemical and Engineering Data, , 57, 1433-1436 (2012)
  • A method for synthesizing ZnO-carbonaceous species nanocomposites, and their conversion to quasi-single crystal mesoporous ZnO nanostructures, RSC Advances, , 2, 566-572 (2012)
  • A one batch synthetic protocol to produce bi-modal aspect ratio ZnO crystallites, Crystal Growth & Design, , 12, 994-999 (2012)
  • Photocatalytic synthesis of pure and water-dispersible graphene monosheets, Chemistry-A European Journal, , 18, 2762-2767 (2012)
  • Porous ZnO-ZnSe nanocomposites for visible light photocatalysis, Nanoscale, , 4, 2066-2071 (2012)
  • Carbon nanotube yarns, Korean Journal of Chemical Engineering, , 29, 277-287 (2012)
  • Light-induced cleaning of CdS and ZnS nanoparticles: superiority to annealing as a post-synthetic treatment of functional nanoparticles, Journal of Physical Chemistry C, , 116, 15427-15431 (2012)
  • Formation of Amorphous Zinc Citrate Spheres and Their Conversion to Crystalline ZnO Nanostructures, LANGMUIR, , 27, 371-378 (2011)
  • Selective Synthesis of SiC and SiOx Nanowires by Direct Microwave Irradiation, JAPANESE JOURNAL OF APPLIED PHYSICS, , 50, - (2011)
  • Improvement of SWCNT transparent conductive films via transition metal doping, CHEMICAL COMMUNICATIONS, , 47, 5202-5204 (2011)
  • A Sonochemical Approach to the Fabrication of Laterally Aligned ZnO Nanorod Field Emitter Arrays on a Planar Substrate, IEEE TRANSACTIONS ON NANOTECHNOLOGY, , 10, 319-324 (2011)
  • Amino Acids as Natural Inhibitors for Hydrate Formation in CO(2) Sequestration, ENVIRONMENTAL SCIENCE & TECHNOLOGY, , 45, 5885-5891 (2011)
  • Gallium ion-assisted room temperature synthesis of small-diameter ZnO nanorods, JOURNAL OF COLLOID AND INTERFACE SCIENCE, , 361, 436-442 (2011)
  • Formation of zinc aluminum mixed metal oxide nanostructures, JOURNAL OF ALLOYS AND COMPOUNDS, , 509, 8770-8778 (2011)
  • Synthesis of carbon nanotubes with catalytic iron-containing proteins, CARBON, , 49, 3717-3722 (2011)
  • Formation of quasi-single crystalline porous ZnO nanostructures with a single large cavity, NANOSCALE, , 3, 3841-3848 (2011)
  • Three-Dimensional Type II ZnO/ZnSe Heterostructures and Their Visible Light Photocatalytic Activities, LANGMUIR, , 27, 10243-10250 (2011)
  • Some Aspects of Design and Applications of Nanohoneycomb and Nanofiber Array Structures, MECHANICS OF COMPOSITE MATERIALS, , 47, 11-36 (2011)
  • A three-dimensional transparent electrode structure with Al-doped ZnO nanorods, IEEE TRANSACTIONS ON NANOTECHNOLOGY, , 10, 1347-1351 (2011)
  • Solution-based fabrication of ZnO/ZnSe heterostructure nanowire arrays for solar energy conversion, JOURNAL OF MATERIALS CHEMISTRY, , 21, 17816-17822 (2011)
  • A method for modifying crystalline nature and texture of ZnO nanostructure surfaces, CRYSTAL GROWTH & DESIGN, , 11, 5615-5620 (2011)
  • The cages, dynamics, and structuring of incipient methane clathrate hydrates, PHYSICAL CHEMISTRY CHEMICAL PHYSICS, , 13, 19951-19959 (2011)
  • The effects of vitamin C on ZnO crystal formation, CRYSTENGCOMM, , 12, 968-976 (2010)
  • Solution-Based Epitaxial Growth of ZnO Nanoneedles on Single-Crystalline Zn Plates, Crystal Growth & Design, , 10, 1289-1295 (2010)
  • Synthesis of crystalline TiO2 nanostructure arrays by direct microwave irradiation on a metal substrate, JOURNAL OF CRYSTAL GROWTH, , 312, 1785-1788 (2010)
  • Facile conversion of bulk metal surface to metal oxide single-crystalline nanostructures by microwave irradiation: Formation of pure or Cr-doped hematite nanostructure arrays, THIN SOLID FILMS, , 518, 5110-5114 (2010)
  • Single crystalline zinc structures synthesized spontaneously in solution, JOURNAL OF MATERIALS CHEMISTRY, , 20, 6982-6989 (2010)
  • Exposed Crystal Face Controlled Synthesis of 3D ZnO Superstructures, LANGMUIR, , 26, 14255-14262 (2010)
  • Synthesis of vertically aligned single-crystalline alpha-(FexCr1-x)(2)O-3 nanostructure arrays by microwave irradiation and their growth mechanism, CRYSTENGCOMM, , 12, 3235-3242 (2010)
  • Room temperature synthesis and optical properties of small diameter (5 nm) ZnO nanorod arrays, NANOSCALE, , 2, 2199-2202 (2010)
  • Carbon-doped ZnO nanostructures synthesized using vitamin C for visible light photocatalysis, CRYSTENGCOMM, , 12, 3929-3935 (2010)
  • Dewetting behavior of Au films on porous substrates, THIN SOLID FILMS, , 519, 706-713 (2010)
  • Microwave synthesis of Cr nanowires on polymeric substrate, CHEMICAL COMMUNICATIONS, , , 1052-1054 (2009)
  • Dependence of the Morphology of Nanostructured Titanium Oxide on Fluoride Ion Content, ELECTROCHEMICAL AND SOLID STATE LETTERS, , 12, C10-C12 (2009)
  • Fabrication of ZnO nanoneedle arrays by direct microwave irradiation, MATERIALS LETTERS, , 63, 739-741 (2009)
  • Overcoming of nanoscale adhesion by electrostatic induction, CURRENT APPLIED PHYSICS, , 9, 703-706 (2009)
  • Precursor Effects of Citric Acid and Citrates on ZnO Crystal Formation, LANGMUIR, , 25, 3825-3831 (2009)
  • The nanoporous structure of anodic aluminum oxide fabricated on the Au/Nb/Si substrate, MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, , 29, 1156-1160 (2009)
  • Synthesis of density-controlled ZnO nanoneedle arrays on a flexible substrate by addition of Al salts and use of microwave irradiation, MATERIALS LETTERS, , 63, 2025-2028 (2009)
  • Facile and Fast Synthesis of Single-Crystalline Fractal Zinc Structures through a Solution Phase Reaction and Their Conversion to Zinc Oxide, LANGMUIR, , 25, 10223-10229 (2009)
  • High-performance NO2 gas sensor based on ZnO nanorod grown by ultrasonic irradiation, SENSORS AND ACTUATORS B-CHEMICAL, , 141, 239-243 (2009)
  • Shape-Selective Fabrication of Zinc Phosphate Hexagonal Bipyramids via a Disodium Phosphate-Assisted Sonochemical Route, CRYSTAL GROWTH & DESIGN, , 9, 3544-3547 (2009)
  • Synthesis of hierarchical hexagonal zinc oxide/zinc aluminium hydroxide heterostructures through epitaxial growth using microwave irradiation, CRYSTENGCOMM, , 11, 1650-1657 (2009)
  • Large-Scale Fabrication of Sub-20-nm-Diameter ZnO Nanorod Arrays at Room Temperature and Their Photocatalytic Activity, JOURNAL OF PHYSICAL CHEMISTRY C, , 113, 10452-10458 (2009)
  • N-Doped ZnS Nanoparticles Prepared through an Inorganic-Organic Hybrid Complex ZnS center dot(piperazine)(0.5), JOURNAL OF PHYSICAL CHEMISTRY C, , 113, 20445-20451 (2009)
  • Core-shell polymeric nanorods prepared from reactive polymer bilayer via sequential complete wetting, SOFT MATTER, , 5, 3835-3838 (2009)
  • Microcantilevers with nanowells as moisture sensors, SENSORS AND ACTUATORS B-CHEMICAL, , 137, 561-565 (2009)
  • Measurement of Elastic Constants of Nanohoneycomb Structures, JOURNAL OF COMPOSITE MATERIALS, , 43, 1155-1175 (2009)
  • Sonochemical Synthesis of Amorphous Zinc Phosphate Nanospheres, BULLETIN OF THE KOREAN CHEMICAL SOCIETY, , 30, 2280-2282 (2009)
  • A method for covering a substrate with highly-oriented single crystalline hexagonal zinc structures under ambient pressure and room temperature, CHEMICAL COMMUNICATIONS, , , 6053-6055 (2009)
  • Synthesis of amorphous Si nanowires from solid Si sources using microwave irradiation, THIN SOLID FILMS, , 517, 6629-6634 (2009)
  • Capacitive humidity sensor design based on anodic aluminum oxide, SENSORS AND ACTUATORS B-CHEMICAL, , 141, 441-446 (2009)
  • Bending fatigue characteristics of nanohoneycomb structures, COMPOSITE STRUCTURES, , 82, 28-35 (2008)
  • Sonochemical preparation of shape-selective ZnO nanostructures, CRYSTAL GROWTH & DESIGN, , 8, 265-269 (2008)
  • A superhydrophobic dual-scale engineered lotus leaf, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, , 18, - (2008)
  • Structure-dependent adhesion and friction on highly ordered metallic nanopore membranes, NANOTECHNOLOGY, , 19, - (2008)
  • Dependence of adhesion and friction on porosity in porous anodic alumina films, SCRIPTA MATERIALIA, , 58, 870-873 (2008)
  • Microcantilevers with nanochannels, ADVANCED MATERIALS, , 20, 1732-1737 (2008)
  • Vertically aligned Fe-doped ZnO nanorod arrays by ultrasonic irradiation and their photoluminescence properties, MATERIALS LETTERS, , 62, 3456-3458 (2008)
  • Synthesis of hierarchical carbon nanostructures functionalized with metal nanoparticles, JOURNAL OF PHYSICAL CHEMISTRY C, , 112, 9539-9543 (2008)
  • Fabrication of metal nanohoneycomb structures and their tribological Behavior, ADVANCED COMPOSITE MATERIALS, , 17, 101-110 (2008)
  • Morphology-controlled growth of ZnO nanostructures using microwave irradiation: from basic to complex structures, JOURNAL OF PHYSICAL CHEMISTRY C, , 112, 12769-12776 (2008)
  • Superhydrophobic nanostructures based on porous alumina, CURRENT APPLIED PHYSICS, , 8, 770-773 (2008)
  • In Situ Fabrication of Density-Controlled ZnO Nanorod Arrays on a Flexible Substrate Using Inductively Coupled Plasma Etching and Microwave Irradiation, JOURNAL OF PHYSICAL CHEMISTRY C, , 112, 17760-17763 (2008)
  • Simultaneous Synthesis of Al-Doped ZnO Nanoneedles and Zinc Aluminum Hydroxides through Use of a Seed Layer, CRYSTAL GROWTH & DESIGN, , 8, 4553-4558 (2008)
  • Nickel stamp fabrication and hot embossing for mass-production of micro/nano combined structures using anodic aluminum oxide, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, , 14, 1689-1694 (2008)
  • Replication of high-aspect-ratio nanopillar array for biomimetic gecko foot-hair prototype by UV nano embossing with anodic aluminum oxide mold, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, , 13, 601-606 (2007)
  • Enhanced mass sensitivity of stress-free, silicon nanowire-grown microcantilever sensors, APPLIED PHYSICS LETTERS, , 90, - (2007)
  • A sonochemical method for fabricating aligned ZnO nanorods, ADVANCED MATERIALS, , 19, 749-749 (2007)
  • Dependence of the mechanical properties of nanohoneycomb structures on porosity, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, , 17, 501-508 (2007)
  • Young's modulus measurements of nanohoneycomb structures by flexural testing in atomic force microscopy, COMPOSITE STRUCTURES, , 79, 548-553 (2007)
  • Fabrication of microchannel containing nanopillar arrays using micromachined AAO (anodic aluminum oxide) mold, MICROELECTRONIC ENGINEERING, , 84, 1532-1535 (2007)
  • Controlled electrochemical dissolution of anodic aluminum oxide for preparation of open-through pore structures, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, , 154, C553-C557 (2007)
  • Generation of stable complex gradients across two-dimensional surfaces and three-dimensional gels, LANGMUIR, , 23, 10910-10912 (2007)
  • Fabrication of diameter-tunable well-aligned ZnO nanorod arrays via a sonochemical route, BULLETIN OF THE KOREAN CHEMICAL SOCIETY, , 28, 1457-1462 (2007)
  • Superhydrophobic micro- and nanostructures based on polymer sticking, KEY ENGINEERING MATERIALS, , 334, 897-900 (2007)
  • YOUNG’S MODULUS OF NANOHONEYCOMB STRUCTURES ACCORDING TO THE POROSITY, KEY ENGINEERING MATERIALS, , 334, 761-764 (2007)
  • Synthesis of carbon nanotubes from solid carbon sources by direct microwave irradiation, CARBON, , 44, 1339-1343 (2006)
  • Measuring the tensile and bending properties of nanohoneycomb structures, MECHANICS OF COMPOSITE MATERIALS, , 42, 173-186 (2006)
  • Packing density control of carbon nanotube emitters in an anodic aluminum oxide nano-template on a Si wafer, DIAMOND AND RELATED MATERIALS, , 15, 1501-1507 (2006)
  • Superhydrophobic nano-wire entanglement structures, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, , 16, 2593-2597 (2006)
  • Flexible micro-supercapacitors, JOURNAL OF POWER SOURCES, , 162, 1467-1470 (2006)
  • Mechanical properties and residual stress in porous anodic alumina structures, THIN SOLID FILMS, , 515, 1932-1937 (2006)
  • Fabrication of vacuum tube arrays with a sub-micron dimension using anodic aluminum oxide nano-templates, MICROELECTRONIC ENGINEERING, , 77, 2-7 (2005)
  • Synthesis of carbon nanotubes with identical dimensions using an anodic aluminum oxide template on a silicon wafer, SYNTHETIC METALS, , 148, 263-266 (2005)
  • Identification of a gallium-containing carbon deposit produced by decomposition of trimethyl gallium, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, , 152, C298-C303 (2005)
  • Vertically aligned carbon-nanotube arrays showing schottky behavior at room temperature, SMALL, , 1, 553-559 (2005)
  • Fabrication of flexible carbon nanotube field emitter arrays by direct microwave irradiation on organic polymer substrate, JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, , 127, 8234-8235 (2005)
  • Fabrication of carbon nanotube emitters in an anodic aluminium oxide nanotemplate on a Si wafer by multi-step anodization, NANOTECHNOLOGY, , 16, 850-858 (2005)
  • Mechanical properties and residual stress measurements in anodic aluminium oxide structures using nanoindentation, GLASS PHYSICS AND CHEMISTRY, , 31, 356-363 (2005)
  • Fabrication of microstructures by wet etching of anodic aluminum oxide substrates, CHEMISTRY OF MATERIALS, , 17, 4049-4052 (2005)
  • Vertically aligned nanopillar arrays with hard skins using anodic aluminum oxide for nano imprint lithography, CHEMISTRY OF MATERIALS, , 17, 6181-6185 (2005)
  • Electrochemical porosimetry, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, , 151, E102-E109 (2004)
  • Preparation of compact polyaniline films: electrochemical synthesis using agar gel template and charge-storage applications, JOURNAL OF POWER SOURCES, , 126, 258-267 (2004)
  • Electrical properties of electrical double layer capacitors with integrated carbon nanotube electrodes, CHEMICAL PHYSICS LETTERS, , 388, 170-174 (2004)
  • Fabrication of all-solid-state electrochemical microcapacitors, JOURNAL OF POWER SOURCES, , 133, 312-319 (2004)
  • Carbon nanotubes based on anodic aluminum oxide nano-template, CARBON, , 42, 2073-2080 (2004)
  • Field emission properties of low-density carbon nanotubes prepared on anodic aluminum-oxide template, JOURNAL OF THE KOREAN PHYSICAL SOCIETY, , 45, L252-L255 (2004)
  • Field emission properties of short crystalline carbon nanotubes cut by sonication on substrate, JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, , 43, L1106-L1108 (2004)
  • Carbon nanofiber composites for the electrodes of electrochemical capacitors, CHEMICAL PHYSICS LETTERS, , 400, 253-257 (2004)
  • High-yield synthesis of multi-walled carbon nanotubes by arc discharge in liquid nitrogen, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, , 76, 285-286 (2003)
  • Field emission from single-walled carbon nanotubes aligned on a gold plate using a self-assembly monolayer, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, , 76, 599-602 (2003)
  • Fabrication of flexible field emitter arrays of carbon nanotubes using self-assembly monolayers, APPLIED PHYSICS LETTERS, , 82, 3770-3772 (2003)
  • Fabrication of the aligned and patterned carbon nanotube field emitters using the anodic aluminum oxide nano-template on a Si wafer, SYNTHETIC METALS, , 139, 385-390 (2003)
  • Fabrication of microcapacitors using conducting polymer microelectrodes, JOURNAL OF POWER SOURCES, , 124, 343-350 (2003)
  • Synthesis of carbon nanotubes using microwave radiation, ADVANCED FUNCTIONAL MATERIALS, , 13, 961-966 (2003)
  • Determination of mesopore size of aerogels from thermal conductivity measurements, JOURNAL OF NON-CRYSTALLINE SOLIDS, , 298, 287-292 (2002)
  • Preparation of aligned carbon nanotubes with prescribed dimensions: Template synthesis and sonication cutting approach, CHEMISTRY OF MATERIALS, , 14, 1859-1862 (2002)
  • In-situ synthesis of carbon nanotubes on organic polymer substrates at atmospheric pressure, ADVANCED MATERIALS, , 14, 676-679 (2002)
  • Fabrication of highly ordered pore array in anodic aluminum oxide, KOREAN JOURNAL OF CHEMICAL ENGINEERING, , 19, 467-473 (2002)
  • Packing density control of aligned carbon nanotubes, CHEMISTRY OF MATERIALS, , 14, 4003-4005 (2002)
  • Preparation and modification of polyacrylonitrile microcellular foam films for use as electrodes in supercapacitors, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, , 148, A094-A101 (2001)
  • Gas permeability of expanded graphite-metallic salt composite, APPLIED THERMAL ENGINEERING, , 21, 453-463 (2001)
  • Synthesis and characterization of resorcinol-formaldehyde organic aerogel, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, , 34, 216-220 (2001)
  • Template-based carbon nanotubes and their application to a field emitter, APPLIED PHYSICS LETTERS, , 78, 2052-2054 (2001)
  • Premixed combustion of coke oven gas in a metallic fibre mat, FUEL, , 80, 1033-1036 (2001)
  • Metal hydride compacts of improved thermal conductivity, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, , 26, 609-613 (2001)
  • Combinatorial technique applied to the synthesis of carbon nanotubes, JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, , 40, L580-L582 (2001)
  • Synthesis, characterisation, and thermal conductivity of resorcinol-formaldehyde aerogel, HIGH TEMPERATURES-HIGH PRESSURES, , 33, 441-446 (2001)
  • Enhancement of heat and mass transfer in silica-expanded graphite composite blocks for adsorption heat pumps: Part I. Characterization of the composite blocks, INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, , 23, 64-73 (2000)
  • Enhancement of heat and mass transfer in silica-expanded graphite composite blocks for adsorption heat pumps. Part II. Cooling system using the composite blocks, INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, , 23, 74-81 (2000)
  • The effect of pore size distribution on the frequency dispersion of porous electrodes, ELECTROCHIMICA ACTA, , 45, 2241-2257 (2000)
  • Preparation of mesoporous activated carbon fibers by catalytic gasification, KOREAN JOURNAL OF CHEMICAL ENGINEERING, , 17, 237-240 (2000)
  • Optimal metallic salt-ammonia reaction couple for single effect solid-gas chemical heat pump, KOREAN JOURNAL OF CHEMICAL ENGINEERING, , 17, 248-251 (2000)
  • Transformation analysis of thermochemical reactor based on thermophysical properties of graphite-MnCl2 complex, INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, , 39, 4127-4139 (2000)
  • Preparation of mesoporous carbon from organic polymer/silica nanocomposite, CHEMISTRY OF MATERIALS, , 12, 3397-3401 (2000)
  • Electrochemical impedance spectroscopy of porous electrodes: the effect of pore size distribution, ELECTROCHIMICA ACTA, , 44, 3513-3519 (1999)
  • Separation of CO2 from CO2/N-2 mixture using supported polymeric liquid membranes at elevated temperatures, SEPARATION SCIENCE AND TECHNOLOGY, , 34, 2383-2394 (1999)
  • Effective thermal conductivity of graphite-metallic salt complex for chemical heat pumps, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, , 13, 481-488 (1999)
  • On the short-cut calculation gf the air ratio in the case of firing fuels containing incombustibles, FUEL, , 77, 1129-1130 (1998)
  • Transient one-dimensional heat flow technique applied to porous reactive medium, REVIEW OF SCIENTIFIC INSTRUMENTS, , 69, 3079-3080 (1998)
  • Adsorption of carbon dioxide on chemically modified carbon adsorbents, SEPARATION SCIENCE AND TECHNOLOGY, , 33, 2039-2057 (1998)
  • Porous graphite matrix for chemical heat pumps, CARBON, , 36, 1801-1810 (1998)
  • Adsorption of carbon dioxide on the chemically modified silica adsorbents, JOURNAL OF NON-CRYSTALLINE SOLIDS, , 242, 69-80 (1998)
  • Manufacture of biodegradable packaging foams from agar by freeze-drying, JOURNAL OF MATERIALS SCIENCE, , 32, 5825-5832 (1997)
  • Gel formation by reversible cluster-cluster aggregation, PHYSICAL REVIEW E, , 54, 997-1000 (1996)
  • LOW-DENSITY, HYDROPHOBIC AEROGELS, JOURNAL OF NON-CRYSTALLINE SOLIDS, , 186, 18-22 (1995)
  • SEPARATION OF CO2 BY MODIFIED GAMMA-AL2O3 MEMBRANES AT HIGH-TEMPERATURE, JOURNAL OF MEMBRANE SCIENCE, , 104, 219-230 (1995)
  • ESTIMATION OF THE HEATING VALUE OF OILY MILL SLUDGES FROM STEEL PLANT, FUEL, , 74, 1918-1921 (1995)
  • EVALUATION OF THE PORE-SIZE DISTRIBUTION IN MERCURY POROSIMETRY USING COMPUTER-SIMULATIONS OF POROUS-MEDIA, KOREAN JOURNAL OF CHEMICAL ENGINEERING, , 11, 131-135 (1994)
  • GAS-PHASE SYNTHESIS OF AIN POWDERS FROM ALCL3-NH3-N2, JOURNAL OF MATERIALS SCIENCE, , 28, 57-64 (1993)
  • THERMAL PLASMA CHEMICAL VAPOR-DEPOSITION FOR SIC POWDERS FROM SICH3CL3-H2, JOURNAL OF MATERIALS SCIENCE, , 26, 5957-5964 (1991)
  • THE GENERALIZED VANDERWAALS PARTITION-FUNCTION .5. MIXTURE OF SQUARE-WELL FLUIDS OF DIFFERENT SIZES AND ENERGIES, FLUID PHASE EQUILIBRIA, , 50, 53-77 (1989)
  • THE GENERALIZED VANDERWAALS PARTITION-FUNCTION .4. LOCAL COMPOSITION MODELS FOR MIXTURES OF UNEQUAL-SIZE MOLECULES, FLUID PHASE EQUILIBRIA, , 34, 113-147 (1987)
  • THE GENERALIZED VANDERWAALS PARTITION-FUNCTION .3. LOCAL COMPOSITION MODELS FOR A MIXTURE OF EQUAL SIZE SQUARE-WELL MOLECULES, FLUID PHASE EQUILIBRIA, , 25, 31-49 (1986)
  • THE GENERALIZED VANDERWAALS PARTITION-FUNCTION .2. APPLICATION TO THE SQUARE-WELL FLUID, FLUID PHASE EQUILIBRIA, , 21, 177-196 (1985)

국내전문학술지

  • MANUFACTURE OF HIGH-ASPECT-RATIO POLYMER NANO-HAIR ARRAYS BY UV NANO EMBOSSING PROCESS, 대한기계학회 논문집A, , 30, 773-778 (2006)
  • UV 나노 엠보싱 공정을 이용한 고종횡비 고분자 나노 섬모 어레이 제작, 대한기계학회논문집 A, , 30, 773-778 (2006)
  • 양극산화 알루미나 나노 템플레이트의 제조 및 응용, 공업화학, , 16, 461-473 (2005)
  • THE STUDY ON PROPERTIES OF AAO(ANODIC ALUMINUM OXIDE) STRUCTURES WITH HOLE EFFECT, 한국정밀공학회지, , 21, 186-193 (2004)
  • TEMPLATE-BASED CARBON NANOTUBES FIELD EMITTER, JOURNAL OF INFORMATION DISPLAY, , 2, 78-85 (2001)
  • 활성탄을 이용한 암모니아의 흡착, 화학공학, , 37, 158-164 (1999)
  • 개선된 두단계 솔-젤공정과 저온 초임계 건조를 이용한 투명한 소수성 저밀도 실리카 에어로젤의 제조, 화학공학, , 36, 293-299 (1998)
  • 리솔시놀-포름알데히드, RF-폴리스티렌 및 TMOS-아닐린 복합 유기 에어로겔의 제조와 특성 분석, 화학공학, , 35, 445-450 (1997)
  • 솔-젤 공정과 초임계 건조에 의한 물유리로부터 투명 에어로젤의 제조, 화학공학, , 35, 552-556 (1997)
  • 전이 일차원 열류기법을 이용한 다공층의 열전도도 측정, 화학공학, , 35, 762-768 (1997)
  • 화학열펌프용 열전도성 블록의 제조 및 특성, 화학공학, , 34, 757-764 (1996)
  • 복사 열전달이 있는 반투명 경사 다공질층에서의 유체 안정성, 화학공학, , 33, 376-385 (1995)
  • 이산화탄소 분리용 복합알루미나 막의 제조, 화학공학, , 33, 570-579 (1995)
  • 젤형성에서의 조건부 확률법 : 분자내 반응으로의 확장, 화학공학, , 32, 146-158 (1994)
  • 몬테카를로 모사에 의한 다공질 매체의 사은 세공측정법 분석, 화학공학, , 31, 16-27 (1993)
  • 솔-젤법에 의한 석영유리의 제조-II. 초임계 건조 및 소결, 화학공학, , 31, 45-53 (1993)
  • GROUP CONTRIBUTION METHOD의 작용기 분석을 위한 전문가 시스템 개발, 화학공학, , 31, 647-657 (1993)
  • 신경회로망을 이용한 JOBACK GROUP CONTRIBUTION METHOD 의 개선, 화학공학, , 31, 744-752 (1993)
  • 솔 - 젤법에 의한 석영유리의 제조 1. 초음파를 이용한 젤의 제조, 화학공학, , 30, 657-663 (1992)
  • 산화규소 표면위에서 WF6-SIH4 화학증착에 의한 텅스텐 핵의 생성, 한국재료학회지, , 2, 19-26 (1992)
  • TIN 표면 위에 텅스텐의 화학증착, 전자공학회논문지, , 29, 319-327 (1992)
  • 개선된 두단계 솔-젤공정과 저온 초임계 건조를 이용한 투명한 소수성 저밀도 실리카 에어로젤의 제조, 화학공학, , 36, 293-299 (0019)

일반학술지

  • ON THE MECHANICAL PROPERTIES OF TRANSVERSELY ISOTROPIC MATERIAL USING THE NANOINDENTATION, ADVANCED MATERIALS RESEARCH, , 33-37, 987-992 (2008)
  • ON THE MECHANICAL PROPERTIES OF TRANSVERSELY ISOTROPIC MATERIAL USING THE NANOINDENTATION, ADVANCED MATERIALS RESEARCH, , 33-37, 987-992 (2008)
  • MEASUREMENT OF THE PORE SIZES FOR ANODIC ALUMINUM OXIDE(AAO), CURRENT APPLIED PHYSICS, , 6, E125-E129 (2006)
  • Fabrication of the vertically aligned carbon nanotubes array showing semiconducting behavior at room temperature, , , 1, 553-559 (2005)
  • A study on the properties of AAO structures with hole effect, JKSPE, , 21, 186-193 (2004)
  • The Effect of Pore Size Distribution on the Electrochemical Impedance of Porous Electrode, ELECTROCHIMICA ACTA, , 44, 3513-3519 (1999)
  • EXPERIMENTAL INVESTIGATION OF POROUS GRAPHITE-SALT BLOCKS FOR CHEMICAL HEAT PUMPS, INTERNATIONAL JOURNAL OF ENVIRONMENTALLY CONSCIOUS DESIGN & MANUFACTURING, , 7, - (1998)
  • ADSORPTION OF CARBON DIOXIDE ON THE CHEMICALLY MODIFIED ADSORBENTS, INTERNATIONAL JOURNAL OF ENVIRONMENTALLY CONSCIOUS DESIGN AND MANUFACTURING, , 7, - (1998)
  • 고분자 전해질 연료전지의 작동원리 및 개발동향, 화학공업과 기술, , 16, 445-454 (1998)
  • POLYMER ELECTROLYTE MEMBRANE FUEL CELL, CHEMICAL INDUSTRY AND TECHNOLOGY, , 16, 445-454 (1998)
  • Chemical vapor nucleation of tungsten from WF6-SiH4 on silicon dioxide surface, KOREAN JOURNAL OF MATERIALS RESEARCH, , 2, 19-26 (1992)
  • AEROGELS, ENERGY R&D, , , - (1991)
  • MANUFACTURING PROCESES FOR OPTICAL FIBER PREFORMS, CERAMICS, , , - (1990)

학술회의논문

  • Development of high strength carbon nanotube fibers by covalent crosslinking, CARBON 2015, 0, 0, - (2015)
  • Fabrication of nanohoneycomb based on anodic aluminum oxide, Proc. of the spring meeting of the KSCM, 0, 0, 231-234 (2006)
  • Tensile and bending properties of nanohoneycomb structures, Spring meeting of Korea Society of Composite Materials, 0, 0, 235-238 (2006)
  • Manufacture of polymer nanopillar array for biomimetic gecko foot-hair using anodic aluminum oxide mold, fall meeting of the Korean Society of Precision Engineering, 0, 0, 26-30 (2005)
  • Pore size effects of adhesion and friction for nanohoneycomb structures in AFM, Fall meeting of the Korean Society of Composite Materials, 0, 0, 129-132 (2005)
  • Young's modulus measurements of nanohoneycomb structures by flexural test in AFM, Fall meeting of Korea Society of Composite Materials, 0, 0, 133-136 (2005)
  • Fabrication and wetting analysis of nanodimple structure based on anodic aluminum oxide method, Spring meeting of KSME, 0, 0, 494-499 (2005)
  • Fabrication of nanohoneycomb structures and measurement of pore sizes, , 0, 0, 265-268 (2005)
  • Fabrication of microstructures with high aspect ratios using anodic aluminum oxide substrates, Japan-Korea Symposium on Materials and Interfaces, 0, 0, 20- (2004)
  • Fabrication of field emitter arrays of carbon nanotubes using self-assembly monolayer technique, APCChE2004, 0, 0, 39090- (2004)
  • Fabrication of field emitter arrays of carbon nanotubes using self-assembly monolayer technique, 2nd Nano Chemical Engineering Symposium, 0, 0, 15- (2004)
  • Measurement of mechanical properties of anodic aluminum oxide structures using nanoindentation, Korea Society of Composite Materials, 0, 0, 144-149 (2004)
  • Synthesis and applications of carbon nanotubes with prescribed dimensions, Summer Meeting of KIEEME, 0, 0, 107-121 (2003)
  • Identification of black deposits produced during the hydride-OMVPE growth of GaN, Electrochemical Society Proceedings, 0, 0, 92-97 (2003)
  • 탄소나노튜브를 이용한 EDLC용 전극 제조, 한국화학공학회 추계 학술발표회, 0, 0, 5422-5425 (2002)
  • Development of one-body electrodes using carbon electrodes, 화학공학회 추계 학술발표회, 0, 0, 5430-5433 (2002)
  • Edge-site가 많은 탄소 나노섬유의 촉매적 합성에 있어서의 열처리 효과, 한국화학공학회 추계 학술발표회, 0, 0, 4862-4865 (2002)
  • In situ synthesis of carbon nanotubes on organic polymer substrates, The 1st symposium for nano-chemical processing, 0, 0, 122-124 (2002)
  • 나노틀을 이용한 탄소 나노튜브의 치수조절 및 전계방출소자로의 응용, 화학공학의 이론과 응용, 0, 0, 1853-1856 (2002)
  • Development of intergrated electrodes using carbon electrodes, KIChE fall meeting, 0, 0, - (2002)
  • Dimension control of carbon nanotubes using nanotemplate and their application to a field emitter, KIChE spring meeting, 0, 0, - (2002)
  • Effect of annealing in catalytic synthesis of highly edge-sited carbon nanofibers, KIChE fall meeting, 0, 0, - (2002)
  • Electrochemical Porosimetry, MRS Symp. Proc., 0, 0, 151-160 (2002)
  • Fabrication of electrodes for EDLC using carbon nanotubes, KIChE fall meeting, 0, 0, - (2002)
  • Fabrication of nanotip array based on AAO template, KIChE fall meeting, 0, 0, 5326-5329 (2002)
  • Field emission from carbon nanotubes aligned on a gold plate using self-assembly monolayer, Field emission workshop, 0, 0, - (2002)
  • In situ synthesis of carbon nanotubes on organic polymer substrates, Nanochemical processing, 0, 0, - (2002)
  • Synthesis of carbon nanotubes in anodic alumina template, Jap. Chem. Eng. Soc. meeting, 0, 0, - (2002)
  • Synthesis of carbon nanotubes using nanotemplates, KCS meeting, 0, 0, 13-14 (2002)
  • Template synthesis of carbon nanotubes and their application to a field emitter, 2nd workshop on carbon nanotubes, 0, 0, 46-49 (2002)
  • 전기이중층 축전기의 제조 및 전극 구조 분석법, 화학공학의 이론과 응용, 0, 0, - (2001)
  • 탄소 나노튜브 합성을 위한 최적 촉매 선정, 화학공학의 이론과 응용, 0, 0, - (2001)
  • Microwave heating을 이용한 탄소 나노튜브 합성, 화학공학의 이론과 응용, 0, 0, - (2001)
  • 양극산화 알루미눔 나노틀, 화학공학의 이론과 응용 [화학공학회 춘계 학술발표회], 0, 0, 1961-1964 (2001)
  • 전기화학적 물성에 미치는 다공성 전극의 미세구조 영향, 화학공학의 이론과 응용 [한국화학공학회 춘계 학술발표회], 0, 0, 2037-2040 (2001)
  • Diffusion flame을 이용한 탄소 나노튜브 합성, 화학공학의 이론과 응용 [화학공학회 춘계 학술발표회], 0, 0, 2258-2261 (2001)
  • Synthesis of carbon nanotubes by C2H2 decomposition on Fe(CO)5 as a catalyst precursor, Int. Symp. Nano. Mat., 0, 0, 70- (2001)
  • Anodic aluminum oxide nanotemplate, KIChE spring meeting, 0, 0, - (2001)
  • Combinatorial optimization of catalysts used in the growth of carbon nanotubes, KIChE meeting, 0, 0, - (2001)
  • Electrochemical porosimetry, MRS fall meeting, 0, 0, - (2001)
  • Fabrication of EDLCs and in situ analysis of porous electrode, KIChE fall meeting, 0, 0, - (2001)
  • Multiwalled carbon nanotubes growth by catalytic chemical vapor deposition in nanotemplate and its application to a field emitter, 2nd Asian conf. CVD, 0, 0, - (2001)
  • Multiwalled carbon nanotubes growth by catalytic pyrolysis in nano-template and its application to a field emitter, MRS meeting, 0, 0, - (2001)
  • Multiwalled carbon nanotubes growth in nanotemplate and their application to a field emission device, ADC/FCT 2001, 0, 0, 716- (2001)
  • Synthesis of carbon nanotubes by microwave heating, ADC/FTC 2001, 0, 0, 805-809 (2001)
  • Synthesis of carbon nanotubes by microwave heating, KIChE fall meeting, 0, 0, - (2001)
  • Synthesis of carbon nanotubes in diffusion flames, KIChE spring meeting, 0, 0, - (2001)
  • Synthesis of CNTs by C2H2 decomposition on Fe(CO)5 as a catalyst precursor, Int. Symp. Nanonetwork Mat., 0, 0, - (2001)
  • Template based carbon nanotubes as a field emitter, Proc. of the 1st Int. Symp. on Cold Cathod, 0, 0, 65-73 (2001)
  • Template-based carbon nanotubes and their application to a field emitter, 1st Int. Meeting Inform. Disp., 0, 0, 316-318 (2001)
  • Template-based carbon nanotubes field emitter, Field Emiss. Workshop, 0, 0, 123-126 (2001)
  • The effect of microstructure on the electrochemical properties of porous electrodes, KIChE spring meeting, 0, 0, - (2001)
  • Template-based carbon nanotubes and their application to a field emitter, Proc. 2nd Cross Straits Symp. Mat. Energy, Environ. Sci., 0, 0, 128-129 (2000)
  • Template based carbon nanotubes as field emitter tip, Abstracts of the 198th meeting of the Electrochemical Society, 0, 0, 552- (2000)
  • The effect of pore size distribution on the capacitive behavior of porous carbon electrode, Abstracts of the 198th meeting of the Electrochemical Society, 0, 0, 980- (2000)
  • 기상합성법에 의한 탄소 나노섬유의 합성, 화학공학의 이론과 응용, 0, 0, 4941-4944 (2000)
  • 실리카-유기 복합 에어로젤의 열 및 물리적 특성 해석, 화학공학의 이론과 응용, 0, 0, 4885-4888 (2000)
  • 액체질소 내의 아크방전을 이용한 탄소 나노튜브의 합성, 화학공학의 이론과 응용, 0, 0, 4641-4644 (2000)
  • 진공 단열패널용 폴리이소시아뉴레이트 에어로젤의 열전도도 특성 연구, 화학공학의 이론과 응용, 0, 0, 4509-4512 (2000)
  • 템플레이트를 이용한 나노튜브의 합성과 전계방출소자로의 응용, 화학공학의 이론과 응용, 0, 0, 4473-447 (2000)
  • CDI 공정용 탄소 에어로젤 제조 및 물리적 성질과 전기화학적 특성 연구, 화학공학의 이론과 응용, 0, 0, 4761-4764 (2000)
  • combinatorial chemistry를 이용한 탄소나노튜브의 합성, 화학공학의 이론과 응용, 0, 0, 4953-4956 (2000)
  • 액체질소 환경에서 아크방전에 의한 탄소 나노튜브 합성, 한국탄소학회 학술발표회, 0, 0, 78-79 (2000)
  • 탄소나노튜브 합성에 적용한 combinatorial screening method, 한국탄소학회 학술발표회, 0, 0, 72-73 (2000)
  • 템플레이트를 이용한 탄소 나노튜브의 합성과 전계방출 특성, 한국탄소학회 학술발표회, 0, 0, 31-32 (2000)
  • 화학축냉용 Na2S-팽창흑연 복합체의 전달 특성 및 시스템 성능 평가, 제4회 에너지기술 학술진흥 workshop, 0, 0, 41-46 (2000)
  • Combinatorial screening method applied to the synthesis of carbon nanotubes, KCS meeting, 0, 0, - (2000)
  • Development of polyacrylonitrile carbon aerogel thin film electrodes for double layer supercapacitors, Joint meeting of NSF-NSERC, 0, 0, - (2000)
  • Effect of pore size on the capacitive behavior of porous carbon electrode, ECS meeting, 0, 0, - (2000)
  • Investigation of porous structure by impedance spectroscopy, ECS meeting, 0, 0, 335- (2000)
  • Study on manufacture and physical property and electrical characterization of carbon aerogel electrode for CDI process, KIChE fall meeting, 0, 0, - (2000)
  • Synthesis of carbon nanofiber by floating catalyst method, KIChE fall meeting, 0, 0, - (2000)
  • Synthesis of carbon nanotubes by arc discharge in liquid nitrogen, KCS meeting, 0, 0, - (2000)
  • Synthesis of CNTs by arc discharge in liquid nitrogen, KIChE fall meeting, 0, 0, - (2000)
  • Synthesis of CNTs using combinatorial chemistry method, KIChE fall meeting, 0, 0, - (2000)
  • Template synthesis of CNTs and its application to field emitter tips, KIChE fall meeting, 0, 0, - (2000)
  • Template synthesis of CNTs and its field emission characteristics, KCS meeting, 0, 0, - (2000)
  • Template-based CNTs and their application to a field emitter, 2nd Cross Strait Symp. Mat. Ener. Environ. Sci., 0, 0, - (2000)
  • Template-based CNTs as field emitter tips, ECS meeting, 0, 0, - (2000)
  • Thermal and physical analysis of silica-organic hybrid aerogel, KIChE fall meeting, 0, 0, - (2000)
  • Thermal conductivity of polyisocyanurate aerogel for vacuum panel insulator, KIChE fall meeting, 0, 0, - (2000)
  • Transfer characteristics of Na2S-expanded graphite composite for chemical cold storage system, 4th workshop Ener. Tech., 0, 0, - (2000)
  • The effect of microstructure on electrochemical properties of porous carbon electrodes, Proc. of the 26th Japanese Carbon Society meeting, 0, 0, 379- (1999)
  • 단열재용 폴리이소시아뉴레이트 에어로젤의 열전도도 특성 연구, 한국에너지공학회 추계 학술발표회 논문집, 0, 0, 217-223 (1999)
  • 화학축열시스템용 반응블록의 전달특성 및 성능평가, 한국에너지공학회 추계학술발표회 논문집, 0, 0, 181-186 (1999)
  • capacitive Deionization용 탄소 에어로젤 전극의 특성평가, 화학공학의 이론과 응용, 0, 0, 1945-1948 (1999)
  • CDI공정용 탄소 에어로젤의 제조, 화학공학의 이론과 응용, 0, 0, 4445-4448 (1999)
  • Na2S-팽창흑연 복합체의 열전달 특성 및 성능실험, 화학공학의 이론과 응용, 0, 0, 3705-3708 (1999)
  • 금속염-팽창흑연 다공성 반응매체의 전달특성, 춘계학술밮표회 논문집, 0, 0, 207-212 (1999)
  • 화학축냉용 무기염들의 수화반응 및 열 및 물질전달 향상방안, 춘계학술밮표회 논문집, 0, 0, 185-191 (1999)
  • 초임계 유체를 이용한 특수기능소재 개발, 화학공학의 이론과 응용, 0, 0, 609-612 (1999)
  • 화학축냉용 수화물의 반응특성 및 열전도성 팽창흑연블록의 제조, 제2회 에너지기술 학술진흥 Workshop, 0, 0, 97-102 (1999)
  • A new model of impedance of porous electrodes considering frequency dispersion by pore size distribution, 8th APPChE, 0, 0, 1897-1900 (1999)
  • Electrochemical properties of carbon aerogel electrode for CDI, , 0, 0, - (1999)
  • Fabrication of specialty functional materials utilizing supercritical fluid processing techniques, KIChE spring meeting, 0, 0, - (1999)
  • Manufacture of carbon aerogel electrode for CDI, KIChE fall meeting, 0, 0, - (1999)
  • Measurement of thermal conductivity of Na2S-graphite complex, KIChE fall meeting, 0, 0, - (1999)
  • Polyisocyanurate aerogels for vacuum insulation panel, KSEE fall meeting, 0, 0, - (1999)
  • Study of hydration reaction characteristics of inorganic salts for chemcal cold storage and method of enhancement of heat and mass transfer, KSEE spring meeting, 0, 0, - (1999)
  • Study of reaction kinetics of salt hydrates and manufacture of expanded graphite blocks, 2nd workshop Ener. Tech., 0, 0, - (1999)
  • Synthesis and thermal conductivity measurement of porous PU, PS foams and RF aerogel, 15th Euro. Conf. Thermophys. Prop., 0, 0, 93- (1999)
  • The effect of microstructure on electrochemical properties of porous carbon electrodes, 26th Jap. Carbon Soc. meeting, 0, 0, - (1999)
  • The effect of pore size distribution on the frequency dispersion of porous electrodes, 196th ECS meeting, 0, 0, 2068- (1999)
  • Transfer characteristics and performance test of the reactive blocks for cold storage system, KSEE fall meeting, 0, 0, - (1999)
  • Transfer characteristics of porous metallic salt-expanded graphite reactive media, KSEE spring meeting, 0, 0, - (1999)
  • 완효성 요소비료 개발을 위한 피복물질 탐색 및 요소의 용출량 예측, 화학공학의 이론과 응용, 0, 0, 2093-2096 (1998)
  • Calculation of the Air Ratio in the Case of Firing Gaseous Fuels Containing Incombustibles, 한국에너지공학회 춘계학술발표회 논문집, 0, 0, 43-48 (1998)
  • 유기 에어로젤 단열재의 제조, 화학공학의 이론과 응용, 0, 0, 3981-3984 (1998)
  • 촉매활성화를 이용한 중기공을 가지는 활성탄소섬유의 제조, 화학공학의 이론과 응용, 0, 0, 3641-3644 (1998)
  • 화학열펌프용 Na2S-H2O계의 반응특성 및 전도성 블록의 제조, 화학공학의 이론과 응용, 0, 0, 3633-3636 (1998)
  • Calculation of air ratio in the case of firing gaseous fuels containing imcombustibles, KES spring meeting, 0, 0, - (1998)
  • Preparation of activated carbon fiber with mesopores using catalytic activation, KIChE fall meeting, 0, 0, - (1998)
  • R/F 에어로젤의 열전도도 측정, 화학공학의 이론과 응용, 0, 0, 3997-4000 (1998)
  • Reaction characteristics of Na2S-H2O system and manufacture of conductive block for chemical heat pump, KIChE fall meeting, 0, 0, - (1998)
  • Search for coating materials and prediction of the amount of urea release for the development of controlled release urea fertilizer, KIChE spring meeting, 0, 0, - (1998)
  • Synthesis of organic aerogel insulator, KIChE fall meeting, 0, 0, - (1998)
  • Thermal conductivity measurement of R/F aerogel, KIChE fall meeting, 0, 0, - (1998)
  • 산 처리 활성탄을 이용한 암모니아의 흡착특성, 추계 한국화학공학회, 0, 0, 2093-2096 (1997)
  • Adsorption of Carbon Dioxide on the Chemically Modified Adsorbents, Int. Symp. Environ. Eng., 0, 0, 178-178 (1997)
  • Experimental Investigation of Porous Graphite-Salt Block for Chemical Heat Pumps, Int. Symp. Environ. Eng., 0, 0, 200-200 (1997)
  • 흡착식 냉동 시스템 모듈의 개선, 공기조화 냉동공학회 동계 학술발표회 논문집, 0, 0, 314-319 (1996)
  • 염기자리를 첨가한 탄소 흡착제에 이산화탄소의 흡착, 화학공학의 이론과 응용, 0, 0, 1593-1596 (1996)
  • 함침액막을 이용한 이산화탄소의 분리, 화학공학의 이론과 응용, 0, 0, 2091-2094 (1996)
  • 흡착식 열펌프용 열전도성 블록의 제조 및 특성평가, 화학공학의 이론 및 응용, 0, 0, 2095-2098 (1996)
  • Preparation and Adsorption Characteristics of Carbon Adsorbents with Base Sites for CO2 High-Temperature Separation, Proceedings of the American Carbon Society Workshop, 0, 0, 72-73 (1996)
  • 함침 액막을 이용한 이산화탄소의 분리, 추계 한국화학공학회, 0, 0, 1709-1712 (1996)
  • 화학열펌프용 흑연지지체의 열적특성, 추계 한국화학공학회, 0, 0, 2091-2094 (1996)
  • 흡착식 냉동시스템 모듈의 개선 연구, 동계 한국냉동공조학회, 0, 0, 314-319 (1996)
  • Adsorption of Carbon Dioxide on the Chemically Modified Carbon Adsorbents, Proc. of the ACS Workshop on Carbon Mat. for the Envir., USA, 0, 0, 72-73 (1996)
  • Adsorption of CO2 on the base-site containing carbon adsorbents, KIChE fall meeting, 0, 0, - (1996)
  • Characterization of Graphite-Salt Blocks in Chemical Heat Pumps, Proc. Int. Ab-Sorption Heat Pump Conf., Canada, 0, 0, 67-73 (1996)
  • Heat and Mass Transfer Characteristics of Graphite-Salt Blocks in Chemical Heat Pumps, Proc. 5th IEA Heat Pump Conf., Canada, 0, 0, 135-147 (1996)
  • 물유리를 이용한 다공성 에어로젤의 제조, 화학공학의 이론과 응용, 0, 0, 1285-1288 (1995)
  • 염 함침 무기막을 이용한 이산화탄소의 분리, 화학공학의 이론과 응용, 0, 0, 801-804 (1995)
  • 함유 압연슬럿지의 물성 및 열적 특성 분석, 화학공학의 이론과 응용, 0, 0, 581-584 (1995)
  • 화학열펌프용 열전도성 블록의 제조, 춘계 한국에너지공학회, 0, 0, 230-235 (1995)
  • CaO를 담지한 실리카젤의 이산화탄소 흡착 특성, 화학공학의 이론과 응용, 0, 0, 805-808 (1995)
  • Knudsen 확산의 전산모사에 의한 다공체의 구조인자 계산, 춘계 한국화학공학회, 0, 0, 900-903 (1995)
  • Manufacture of Biodegradable Packaging Foams from Agar, 춘계 한국고분자학회, 0, 0, 164-165 (1995)
  • Manufacuture and characterization of heat conductive blocks for chemical heat pump, SAREK winter meeting, 0, 0, 248-254 (1995)
  • Application of artificial intelligence technique to the group contribution method, 2nd Int. Symp. Therm. Chem. Eng. Ind., 0, 0, - (1994)
  • CO2 separation by surface modified Al2O3 membranes at high temperature, KCS spring meeting, 0, 0, - (1994)
  • Manufacture of biodegradable agar gels, KIChE fall meeting, 0, 0, - (1994)
  • Manufacture of heat conductive blocks in chemical heat pump, KIChE fall meeting, 0, 0, - (1994)
  • Separation of CO2 using IMS membranes, KIChE fall meeting, 0, 0, - (1994)
  • Separation of CO2 using inorganic membranes, MSK fall meeting, 0, 0, - (1994)
  • Supercritical carbon dioxide drying of low-density aerogels, 3rd Int. Symp. Supercrit. Fluids, 0, 0, - (1994)
  • Synthesis and surface modification of low density aerogels, KCS spring meeting, 0, 0, - (1994)
  • Synthesis of low-density hydrophobic aerogels by 2-step process and surface modification, 4th Int. Symp. Aerogels, 0, 0, - (1994)
  • Thermal convective instability in transluscent porous media of silica aerogel pellets with radiative heat transfer, 4th Int. Symp. Aerogels, 0, 0, - (1994)
  • Development of ceramic membranes for gas separation, MSK fall meeting, 0, 0, - (1993)
  • Development of ceramic membranes for gas separation: I. Preparation of sol-gel derived alumina membranes, KIChE fall meeting, 0, 0, - (1993)
  • Fabrication of R/F organic aerogels, KIChE fall meeting, 0, 0, - (1993)
  • Preparation of hydrophobic, low density silica aerogels, KIChE fall meeting, 0, 0, - (1993)
  • A study on the kinetic growth modelling in the sol-gel transition reaction, KIChE spring meeting, 0, 0, - (1992)
  • A study on the nonideal polymerization with intramolecular reaction, KPS fall meeting, 0, 0, - (1992)
  • A study on the synthesis of low density silica aerogels using sol-gel process, KIChE fall meeting, 0, 0, - (1992)
  • Application of artificial intelligence in the estimation of physical properties using group contribution method, KIChE fall Meeting, 0, 0, - (1992)
  • Kinetic study of sol-gel reaction using conditional probability method, KIChE fall meeting, 0, 0, - (1992)
  • Manufacture of high purity glass using sol-gel process, KCS spring meeting, 0, 0, - (1992)
  • Simulation for colloid aggregation growth, KIChE spring meeting, 0, 0, - (1992)
  • Yield and characteristics of AlN powders from AlCl3-NH3, KIChE spring meeting, 0, 0, - (1992)
  • CVD of Tungsten on TiN, KIChE fall meeting, 0, 0, - (1991)
  • Manufacture of SiO2 monolith using two-step sono-sol-gel process, KIChE fall meeting, 0, 0, - (1991)
  • Step coverage of silane reduced LPCVD tungsten, KIChE fall meeting, 0, 0, - (1991)
  • Step coverage of silane reduced LPCVD tungsten film, 2nd Int. Conf. VLSI & CAD, 0, 0, - (1991)
  • Analysis of pore size distribution of porous media using computer simulation of mercury porosimetry, KIChE fall meeting, 0, 0, - (1990)
  • The effect of hydrolysis time on the gelation time in two step SiO2 sol-gel process, KIChE fall meeting, 0, 0, - (1990)
  • Controlled catalytic synthesis of carbon nanotubes density on the anodic aluminum oxide, Proc. of the fall meeting of the KIChE, 0, 0, 318- (0000)
  • Dependence of the morphology of nanostructured titanium oxide on fluoride ion content, Proc. Of the fall meeting of the KIChE, 0, 0, 335- (0000)
  • Effect of SDS addition on the formation of SF6 hydrate, Proc. Of the fall meeting of the KIChE, 0, 0, 239- (0000)
  • Fabrication of hierarchical carbon fibers using microwave irradiation, Proc. Of the fall meeting of the KIChE, 0, 0, 326- (0000)
  • Field emission properties of SiC nanowires grown on carbon fibers, Proc. Of the fall meeting of the KIChE, 0, 0, 321- (0000)
  • Microcantilevers with nanochannels, ChinaNano 2007, 0, 0, 47- (0000)
  • Microwave synthesis of nanomaterials, Spring meeting of the KIChE, 0, 0, 70- (0000)
  • Microwave synthesis of nanomaterials, 2007 Texas-Korea Nanotech Workshop, 0, 0, - (0000)
  • Microwave synthesis of nanomaterials, The 5th International Conference on Separation Technology, 0, 0, 6- (0000)
  • Synthesis of transparent electrode structure with needle-like ZnO nanowires, Proc. Of the fall meeting of the KIChE, 0, 0, 333- (0000)
  • Fabrication of conducting polymer microcapacitors, 5th Korea-Japan Symposium on Materials, 0, 0, 70- (0000)
  • Fabrication of field emitter array of carbon nanotubes on various substrates using self-assembly monolayer technique, 5th Korea-Japan Symposium on Materials, 0, 0, 71- (0000)
  • Fabrication of vacuum tube array with a sub-micron dimension using anodic aluminum oxide nano-template, 5th Korea-Japan Symposium on Materials, 0, 0, 69- (0000)
  • Fabrication of all-solid microcapacitors, 1st Int. Conf. Polymer Batteries Fuel Cells, 0, 0, - (0000)
  • Fabrication of vacuum tube arrays with a sub-micron dimension using anodic alumnum oxide nano-templates, The 3rd International Meeting on Information Display, 0, 0, 867-869 (0000)
  • Nanopatterning of polymeric surface using anodized aluminun oxide nanotemplate, Fall Conference of KOSOMBE, 0, 0, - (0000)
  • Meachanical properties and residual stress measurements in anodic aluminum oxide structures using nanoindentation, Topical meeting of ECS ""Nanoparticles, nanostructures and nanocomposites"", 0, 0, - (0000)
  • Electrochemical characterization of silicon anodes for thin film batteries, 6th Cross Straits Symposium on Materials, Energy and Environmental Engineering, 0, 0, 63-64 (0000)
  • Fabrication of Carbon nanotube emitters in an Anodic Aluminum Oxide Nano-Tempalte on a Si wafer, 6th Cross Straits Symposium on Materials, Energy and Environmental Engineering, 0, 0, 67-68 (0000)
  • Fabrication of Ordered Air-Pillar Structures by Nano Imprint Lithography, , 0, 0, 69-70 (0000)
  • Fabrication of the vertically aligned carbon nanotubes array showing semiconductor behavior at room temperature, 6th Cross Straits Symposium on Materials, Energy and Environmental Engineering, 0, 0, 71-72 (0000)
  • Synthesis of carbon nanotubes from solid sources by direct microwave irradiation, 6th Cross Straits Symposium on Materials, Energy and Environmental Engineering, 0, 0, 101-102 (0000)
  • Synthesis of carbon nanotubes on polymer surface by microwave irradiation, 6th Cross Straits Symposium on Materials, Energy and Environmental Engineering, 0, 0, 103-104 (0000)
  • Fabrication of flexible field emitter array of carbon nanotubes, Proceedings of US-Korea conference, Nanostructure science and technology symposium 2, 0, 0, 39086- (0000)
  • Carbon nanofiber composites for the electrodes of electrochemical capacitors, 6th Cross Straits Symposium on Materials, Energy and Environmental Engineering, 0, 0, 49-50 (0000)
  • Fabrication of multi-scale cantilevers, Proc. Int. Sensors Conf., 0, 0, 65-67 (0000)
  • Fabrication of amorphous silicon nanowires for thin film batteries, Proceedings of the 7th Cross Straights Symposium on Materials, Energy and Environmental Sciences, 0, 0, 31-32 (0000)
  • Fabrication of flexible field emitter array of CNTs, International Conference on Nanotechnology, 0, 0, - (0000)
  • Anodic aluminum oxide nano-template devices, The Conference of Koreans on Science and Technology, 0, 0, 219-222 (0000)
  • Replication of High-Aspect-Ratio polymer nanopillar array for biomimetic gecko's foot-hair, The 8th Korean MEMS conference, 0, 0, 35-38 (0000)
  • Fabrication of superhydrophobic nanowire bush structures, Fall meeting of the Korea Society of Mechanical Engineers, 0, 0, 236- (0000)
  • Bending fatigue characteristics of nanohoneycomb structures, Fall meeting of the Korea Society of Composite Materials, 0, 0, 222-225 (0000)
  • Fabrication and the tribological behavior of metal nanohoneycomb structures, Fall meeting of the Korea Society of Composite Materials, 0, 0, 234-237 (0000)
  • Fabrication of superhydrophobic micro/nanostructures based on anodic aluminum oxide, Fall meeting of the Korea Society of Composite Materials, 0, 0, 230-233 (0000)
  • The effect of tip shape and indentation direction of transversely isotropic material in the nanoindentation, Fall meeting of the Korea Society of Composite Materials, 0, 0, 314-317 (0000)

학회발표

  • Parameer study for high quality CNT films via 2-stage floating catalyst method, ., 0, 0, - (2016)
  • In-situ polymerization of polyacrylonitrile (PAN) for enhanced dispersion properties of carbon nanotube (CNT), ., 0, 0, - (2016)
  • Electrical conductivity measurement of CNT fibers using flash annealing treatment, ., 0, 0, - (2016)
  • Effect of Additives on Gas Hydrate Formation, ., 0, 0, - (2016)
  • The effect of synthesis variables on the synthesis of CNT sheets, ., 0, 0, - (2016)
  • The effect of synthesis variables on the synthesis of CNT sheets, ., 0, 0, - (2016)
  • Improving the strength of carbon nanotube fiber by Microcombing and cross-linking, ., 0, 0, - (2016)
  • Synthesis of carbon nanotube fiber from carbon nanotube aerogel, ., 0, 0, - (2016)
  • Synthesis of CNT forest on the Fe-implanted wafer, ., 0, 0, - (2016)
  • Quantitative analysis of cross-linking chemical reaction of carbon nanotube, ., 0, 0, - (2016)
  • Proper linear density measurement method of hierarchical structural carbon nanotube fibers by vibroscope, ., 0, 0, - (2016)
  • Development of High-Strength Carbon Nanotube Fibers, ., 0, 0, - (2016)
  • Effect of Sulfur on the Catalyst Agglomeration in the Direct Spinning of Carbon Nanotube Fibers, ., 0, 0, - (2016)
  • Space Elevator, ., 0, 0, - (2015)
  • Graphitization of amorphous carbon powder by microwave heating, ., 0, 0, - (2015)
  • Effect of additives on hydrate formation, ., 0, 0, - (2015)
  • Controlling the CNT diameters by using Fe ion implanted wafers, ., 0, 0, - (2015)
  • Improvement of the tensile strength of carbon nanotube fibers by the cross-linking chemical reaction, ., 0, 0, - (2015)
  • Controlling the CNT diameter distribution by using Fe ion implantation, ., 0, 0, - (2015)
  • Synthesis mechanism of carbon nanotube fibers using sulfur promoter during direct spinning process, ., 0, 0, - (2015)
  • Exfoliation mechanism of Graphite Intercalation Compounds (GICs) using microwave irradiation, ., 0, 0, - (2015)
  • Improvement of tensile strength of carbon nanotube fibers by esterification, ., 0, 0, - (2015)
  • Synthesis of CNT films using 2-stage floating catalyst method, ., 0, 0, - (2015)
  • Strengthening of CNT fibers via Free Radical Chain Polymerization Cross-Linking, ., 0, 0, - (2015)
  • Synthesis of CNT forest from the Fe ion implanted Si wafer, ., 0, 0, - (2015)
  • CNT Yarns, ., 0, 0, - (2015)
  • Full graphitization of amorphous carbons by microwave heating with catalyst, ., 0, 0, - (2015)
  • Microwave graphitization of activated carbon powders and their battery application, ., 0, 0, - (2015)
  • Investigation on the exfoliation mechanism of Graphite intercalation Compounds (GICs) using microwave irradiation, ., 0, 0, - (2015)
  • Synthesis of high quality carbon nanotube fiber from CNT aerogels by controlling the catalyst size, ., 0, 0, - (2015)
  • Enhancing tensile strength of carbon nanotube fibers by esterification, ., 0, 0, - (2015)
  • Microwave heating mechanism of solid carbons, ., 0, 0, - (2015)
  • Continuous synthesis of CNT films, ., 0, 0, - (2015)
  • The effect of carrier gas flow rate on synthesis of CNT fibers by direct spinning method, ., 0, 0, - (2015)
  • Preventinig Fe catalyst migration using Fe ion implantation on Si wafers, ., 0, 0, - (2015)
  • Development of natural inhibitors for gas hydrate formation, ., 0, 0, - (2015)
  • Rethinking graduate engineering education, ., 0, 0, - (2015)
  • Life with a Big Brother : from theoretical Thermodynamics to Porous Material Synthesis, ., 0, 0, - (2015)
  • Investigation on the Mechanism of Microwave Exfoliation of Graphite Intercalation Compounds, ., 0, 0, - (2015)
  • High-Strength Carbon Nanotube Fibers, ., 0, 0, - (2015)
  • Diffusion boundary layer in the growth of centimeter-tall carbon nanotube forests, ., 0, 0, - (2014)
  • Investigations into the gas hydrate and amino acid complex system, ., 0, 0, - (2014)
  • Development of high strength CNT fibers, ., 0, 0, - (2014)
  • Purification of CNT fiber by acid Treatment, ., 0, 0, - (2014)
  • Superhydrophobic surface through direct microwave irradiation on stainless steel surface, ., 0, 0, - (2014)
  • Effects of promoter on the formation of gas hydrate from Blast Furnace Gas, ., 0, 0, - (2014)
  • Synthesizing the carbon nanotubes fibers with controlling the ratio of precursors, ., 0, 0, - (2014)
  • Carbon Nanotube Fiber: A Bulk Nanomaterial, ., 0, 0, - (2014)
  • Perturbation inhibition hypothesis for the mechanism of kinetic hydrate inhibition, ., 0, 0, - (2014)
  • Amino acids as thermodynamic hydrate inhibitors for gas hydrate formation, ., 0, 0, - (2014)
  • Formation of Gas Hydrate from The Blast furnace Gas of a Steel Mill for The Separation of CO2, ., 0, 0, - (2014)
  • Graphitization of amorphous carbon powder by microwaves, ., 0, 0, - (2014)
  • Mechanism of microwave heating of solid carbons, ., 0, 0, - (2014)
  • Growth of Centimeter-Tall Carbon Nanotube Forests, ., 0, 0, - (2014)
  • Effect of carbon sources on the morphology of the CNTs in the direct synthesis of CNT yarns, ., 0, 0, - (2014)
  • Mechanism of Microwave Exfoliation of Graphite Intercalation Compounds, ., 0, 0, - (2014)
  • Fabrication of High-strength Carbon Nanotube Fibers, ., 0, 0, - (2014)
  • Synthesis of graphite-bisulfate compounds and production of graphene, ., 0, 0, - (2014)
  • Formation of gas hydrate from the blast furnace gas of a steel mill for the separation of CO2, ., 0, 0, - (2014)
  • High-strength Carbon Nanotube Yarns by Covalent Cross-linking, ., 0, 0, - (2014)
  • Hydrophobic amino acids as hydrate inhibitors for CO2 sequestration, ., 0, 0, - (2012)
  • Investigations into the gas hydrate inhibition phenomena by powder X-ray diffraction technique, ., 0, 0, - (2012)
  • Difference of Al2O3 and SiO2 as iron catalyst supporting layer in the growth of spinnable CNT forest, ., 0, 0, - (2012)
  • The fabrication of continuous Carbon nanotube fibers (CNT fibers), ., 0, 0, - (2012)
  • De-intercalation of Graphite Intercalation Compounds, ., 0, 0, - (2012)
  • Microwave treatment of carbon microspheres synthesized by hydrothermal carbonization of glucose, ., 0, 0, - (2012)
  • Effect of microwave treatment to carbon in different gas atmosphere, ., 0, 0, - (2012)
  • Carbon nanotube fibers (CNT fibers) produced by a floating catalyst method, ., 0, 0, - (2012)
  • Continuous carbon nanotube fibers (CNT fibers) fabricated using vertical furnace, ., 0, 0, - (2012)
  • Correlations between physicochemical properties of amino acids and their performances in inhibiting CO2 hydrate formation, ., 0, 0, - (2012)
  • Effects of thermodynamic promoters on the phase equilibrium of flue gas hydrates, ., 0, 0, - (2012)
  • Microwave processing of Conducting materials, ., 0, 0, - (2012)
  • Influence of hydrophobicity on the performance of inhibitors for carbon dioxide hydrate formation, ., 0, 0, - (2012)
  • Centimeter-Long CNT Forest, ., 0, 0, - (2012)
  • Microwave graphitization of pitch derived carbons, ., 0, 0, - (2012)
  • Praperation, Characterization of Cross-linked CNTs for application yarn, ., 0, 0, - (2012)
  • Synthesis of narrow diameter distributed SWCNTs using polymerized hemoglobin, ., 0, 0, - (2012)
  • Synthesis of centimeter-long CNT forest, ., 0, 0, - (2012)
  • The Relation between Morphology of Carbon Nanotube Forest and Its Spinnability, ., 0, 0, - (2012)
  • Carbon nanotube films from floating catalyst method using liquid feedstock containing metal catalyst, ., 0, 0, - (2012)
  • Fabrication and Analysis of Polymer Confined into AAO Nanopores, ., 0, 0, - (2012)
  • Thermodynamic inhibition mechanism of CO2 hydrate formation, ., 0, 0, - (2012)
  • Graphitization of carbon by microwaves, ., 0, 0, - (2012)
  • Kinetic inhibition mechanism of CO2 hydrate formation, ., 0, 0, - (2012)
  • Synthesis of high-carbon content microspheres by microwave carbonization, ., 0, 0, - (2012)
  • Highly conductive electrodes for Li-ion batteries using MWCNTs as a conducting agent, ., 0, 0, - (2012)
  • Synthesis of nanostructures by microwave irradiation on the electrically conducting solid surfaces, ., 0, 0, - (2012)
  • Thermodynamic promoter effects on the phase equilibrium of BFG(Blast Furnace Gas) hydrate, ., 0, 0, - (2011)
  • Molecular Behavior of SF6+H2 Structure II Hydrates, ., 0, 0, - (2011)
  • Natural Inhibitors for CO2 hydrate formation, ., 0, 0, - (2011)
  • Synthesis, characterization of copoly(3-alklthiophene)/SWNT composite for solar cell application, ., 0, 0, - (2011)
  • Carbon Nanotube Yarns, ., 0, 0, - (2011)
  • Synthesis of carbon nanotubes with polymerized hemoglobin, ., 0, 0, - (2011)
  • High performance Lithium-ion batteries using MWCNTs as conducting agent, ., 0, 0, - (2011)
  • Microwave-assisted Hydrothermal Carbonization of Biomass, ., 0, 0, - (2011)
  • Fabrication of hierarchical carbon fiber composites using tightly bounded CNT forests on carbon fibers, ., 0, 0, - (2011)
  • N-doped Carbon Structure via Hydrothermal Carbonization using Microwave Irradiation, ., 0, 0, - (2011)
  • Synthesis of tightly bounded CNT forests on carbon fibers for composites, ., 0, 0, - (2011)
  • The effect of bottom alignment of carbon annotube forest on its spinnability, ., 0, 0, - (2011)
  • "Continuous" QCM Method for the Fast Screening of Promoters, ., 0, 0, - (2011)
  • Phase Equilibria of Blast Furnace Gas(BFG) Hydrates by Using "Continuous" QCM Method, ., 0, 0, - (2011)
  • Amino acids as natural inhibitors for CO2 hydrate formation, ., 0, 0, - (2011)
  • Molecular Dynamics Study of Binary SF6-H2 sII Hydrate, ., 0, 0, - (2011)
  • Growth of adhesion-improved CNT forests on carbon fibers for composites, ., 0, 0, - (2011)
  • Synthesis of SWCNTs by using size-controlled nanoparticles from polymerized hemoglobin, ., 0, 0, - (2011)
  • The Effect of Root Morphology of Carbon Nanotube Forest on Spinnability, ., 0, 0, - (2011)
  • The effects of vitamin C on formation of ZnO nanostructures, ., 0, 0, - (2011)
  • Tightly bounded CNT forests on carbon fibers for composites, ., 0, 0, - (2011)
  • Hemoglobin as a catalyst in the growth of single-walled carbon nanotubes, ., 0, 0, - (2011)
  • Catalyst preparation on the growth of single-walled carbon nanotubes using hemoglobin, ., 0, 0, - (2011)
  • Growth of single-walled carbon nanotubes using iron oxide nanoparticles from hemoglobin, ., 0, 0, - (2011)
  • Controlling the distribution of Fe catalyst for the synthesis of carbon nanotube forest, ., 0, 0, - (2011)
  • Hydrothermal Carbonization of Glucose using Microwave Irradiation, ., 0, 0, - (2011)
  • Separation of CO2 emitted from steelmaking process using gas hydrate technology, ., 0, 0, - (2011)
  • Reaction Engineering with Microwaves, ., 0, 0, - (2011)
  • Single-Crystalline Zinc Structures Synthesized Spontaneously in Solution, ., 0, 0, - (2010)
  • CO2 Hydrate Phase Equilibria with Green Thermodynamic Hydrate Inhibitors, ., 0, 0, - (2010)
  • Phase Equilibrium Measurement of Gas Hydrates using QCM method, ., 0, 0, - (2010)
  • Hierarchical carbon fiber composites, ., 0, 0, - (2010)
  • Enhancing Alignment of CNT Forest at the Bottom Part for Spinnability, ., 0, 0, - (2010)
  • Electrochemical Porosimetry, ., 0, 0, - (2010)
  • Converting waste plastics into CNT forest, ., 0, 0, - (2010)
  • Separation of single walled carbon nanotubes via liquid phase separation route, ., 0, 0, - (2010)
  • Hemoglobin as a catalyst in the growth of carbon nanotubes, ., 0, 0, - (2010)
  • Effect of Alignment at the Bottom Part of the Carbon Nanotube Forest on Spinnability, ., 0, 0, - (2010)
  • Hierarchical carbon fiber composites, ., 0, 0, - (2010)
  • Growth of carbon nanotubes from iron containing proteins, ., 0, 0, - (2010)
  • Morphology Controlled Synthesis of CuO Nanostructures using Microwave Irradiation, ., 0, 0, - (2010)
  • Phase Equilibrium Measurement of Gas Hydrates using QCM method, ., 0, 0, - (2010)
  • CO2 hydrate Phase equilibria with THI(Thermodynamic Hydrate Inhibitors)s, ., 0, 0, - (2010)
  • Turning refuse PET into CNT forest, ., 0, 0, - (2010)
  • Enhancement of Alignment of CNT Forests at the Bottom Part: a Key to Spinnability, ., 0, 0, - (2010)
  • Electrochemical Porosimetry, ., 0, 0, - (2010)
  • CO2 hydrate phase equilibria in the presence of additive promoters by using QCM method, ., 0, 0, - (2010)
  • Hierarchical Carbon Fiber Composites (1 of 2), ., 0, 0, - (2010)
  • Synthesis of single-crystalline Zn structures through solution phase reactions, ., 0, 0, - (2010)
  • Energy Omnibus : Numerical Considerations, ., 0, 0, - (2010)
  • Gas hydrate research at POSTECH, ., 0, 0, - (2010)
  • Selective Synthesis of SiC and SiO2 nanowires by direct microwave irradiation, ., 0, 0, - (2010)
  • Parametric study on the synthesis of super-aligned CNT forests for CNT yarn, ., 0, 0, - (2010)
  • fabrication of flexible CNT emitter by direct microwave irradiation, ., 0, 0, - (2010)
  • Synthesis of SiC nanowires by direct microwave irradiation, ., 0, 0, - (2010)
  • Synthesis of Super-aligned CNT forests and Spinning CNT yarns, ., 0, 0, - (2010)
  • Synthesis of Super-aligned CNT forests and Spinning CNT yarns, ., 0, 0, - (2010)
  • Growth of SiC nanowires by direct microwave irradiation, ., 0, 0, - (2010)
  • Promoter and Inhibitor Effects on Phase Equilibrium of CO2 Hydrate, ., 0, 0, - (2010)
  • Promoter Effects on Phase Equilibrium of H2 Hydrate, ., 0, 0, - (2010)
  • Microwave synthesis of nanomaterials, ., 0, 0, - (2010)
  • Promoter effects on the phase equilibrium of CO2 hydrates, ., 0, 0, - (2009)
  • Separation and Sequestration of CO2 using Hydrate Technology, ., 0, 0, - (2009)
  • CO2 Separation by Gas Hydrate technology, ., 0, 0, - (2009)
  • Hierarchical Carbon Fiber Composites, ., 0, 0, - (2009)
  • Growth of carbon nanotubes on carbon fibers, ., 0, 0, - (2009)
  • Electrochemical Porosimetry, ., 0, 0, - (2009)
  • Device applications of anodic aluminum oxide, ., 0, 0, - (2009)
  • Microwave synthesis of nanomaterials, ., 0, 0, - (2009)
  • Synthesis of Si nanowires for the anode material of Li batteries, ., 0, 0, - (2007)
  • Hierarchical carbon fiber composites (part I), ., 0, 0, - (2007)
  • Fabrication of micropower sources using conducting polymer microelectrodes : electrochemical microcapacitors and microbattery-capacitor hybrid system, fall meeting of the Korean Battery Society, 0, 0, 27- (2003)
  • The effect of microstructure on the electrochemical properties of porous carbon electrodes, Korea-Japan joint seminar on porous carbon, 26th Japanese Carbon Society meeting, 0, 0, - (1999)
  • Electrochemical Porosimetry, International Conference on Separation Science and Technology (ICSST08), 0, 0, - (0000)
  • Growth of carbon nanotubes field emitters on anodic aluminum oxide template, International Conference on Frontiers in Chemical Engineering (ICFCE), 0, 0, - (0000)
  • Guidelines for the use of TEM for the measurement of Wall Thickness and Number of Graphitic Layers of MWCNTs, 7th meeting of ISO/TC229 Nanotechnologies, 0, 0, - (0000)
  • Microwave synthesis of nanomaterials, Fall meeting of Korean Society of Industrial and Engineering Chemistry, 0, 0, - (0000)
  • Microwave synthesis of nanomaterials, Yonsei Global Engineering Symposium, 0, 0, - (0000)
  • Microwave synthesis of nanomaterials, The 1st Kyushu Univ. Global COE / POSTECH Joint Symposium on Nanomaterials, 0, 0, - (0000)
  • Morphology-controlled growth of ZnO nanostructures using microwave irradiation, UKC2008, 0, 0, - (0000)
  • Morphology-controlled growth of ZnO nanostructures using microwave irradiation : from basic to complex structures, Global Congress on Microwave Energy Applications (GCMEA2008 / MAJIC 1st), 0, 0, - (0000)
  • Morphology-controlled growth of ZnO nanostructures using microwave irradiation : from basic to complex structures, International Conference on Frontiers in Chemical Engineering (ICFCE), 0, 0, - (0000)
  • Sonochemical Preparation Of Shape-Selective ZnO Nanostructures, The 9th Cross Straits Symposium on Materials, Energy and Environmental Engineering, 0, 0, - (0000)
  • Synthesis and Applications of Carbon Nanotubes with Prescribed Dimensions, UCI Lecture Series on Molecular Nanotechnology and Quantum Information Science, 0, 0, - (0000)
  • Fabrication of field emitter arrays of carbon nanotubes aligned on patterned substrates using self-assembly monolayer, MRS spring meeting, 0, 0, 41-46 (0000)
  • Fabrication of field emitter arrays using carbon nanotubes aligned on various substrates by self-assembly monolayer technique, Int. Conf. Sci. Appl. Nanotubes 2003, 0, 0, - (0000)
  • Synthesis of carbon nanotubes with prescribed dimensions, Workshop on Nanostructured Materials and Nanomanufacturing, 0, 0, - (0000)
  • Electrochemical properties of carbon materials for electrical double layer capacitors, KIChE fall meeting, 0, 0, - (0000)
  • Fabrication of electrochemical microcapacitors using conducting polymer microelectrodes, KIChE fall Meeting, 0, 0, - (0000)
  • Fabrication of secondary structures for MEMS using anodic aluminum oxide nano-templates, KIChE fall meeting, 0, 0, - (0000)
  • Synthesis and applications of carbon nanotubes with prescribed dimensions, KIChE fall Meeting, 0, 0, - (0000)
  • Fabrication of field emitter array of carbon nanotubes on various substrates, annual meeting of AIChE, 0, 0, - (0000)
  • Synthesis of carbon nanotubes with prescribed dimensions, annual meeting of AIChE, 0, 0, - (0000)
  • Fabrication of field emitter arrays of carbon nanotubes using self-assembly monolayer technique, 3rd Int. Symp. Nano-carbon Mater., 0, 0, - (0000)
  • Electrochemical properties of silicon thin film anodes, KIChE fall meeting, 0, 0, - (0000)
  • Fabrication of anodic aluminum oxide nano-templates and replicas, KIChE fall meeting, 0, 0, - (0000)
  • Fabrication of vertically aligned carbon nanotubes arrays showing semiconducting behavior at room temperature, KIChE fall meeting, 0, 0, - (0000)
  • Field emission characteristics of carbon nanotubes in anodic aluminum oxide nano-templates formed on silicon wafers by multiple anodizations, KIChE fall meeting, 0, 0, - (0000)
  • Synthesis of carbon nanofibers and their composites with conducting olygoaniline for the electrode of electrochemical capacitors, KIChE fall meeting, 0, 0, - (0000)
  • Direct Synthesis of Carbon Nanotubes on Organic Polymer Substrates, AIChE meeting, 0, 0, - (0000)
  • Low temperature synthesis of carbon nanotubes by direct microwave irradiation, 2nd US-Korea workshop on nanoelectronics, 0, 0, - (0000)
  • Simple large area high-aspect-ratio nanostructure replication of biomimetic gecko foot-hair prototype by UV nano embossing with AAO (anodic aluminum oxide) mold, , 0, 0, - (0000)
  • Measurement of the pore sizes in anodic aluminum oxide, NANO KOREA 2005, 0, 0, - (0000)
  • Direct synthesis of carbon field emitters on glass substrates by microwave irradiation, KIChE fall meeting, 0, 0, - (0000)
  • Fabrication of nano/micro multiscale cantilever arrays using anodic aluminum oxide substrates, KIChE fall meeting, 0, 0, - (0000)
  • Growth of metal nanowires by microwave irradiation, KIChE fall meeting, 0, 0, - (0000)
  • Selective synthesis of single-crystalline ZnO nanostructures by a sonochemical route under ambient conditions, KIChE fall meeting, 0, 0, - (0000)
  • Measurement of tensile and bending properties of nanohoneycomb structures, 16th International Conference on Mechanics of Composite Materials (MCM-2006), 0, 0, - (0000)
  • Electrochemical characterization of silicon anodes for thin film batteries, Spring meeting of KIChE, 0, 0, - (0000)
  • Sonochemical growth of vertically aligned ZnO nanorod arrays over large area, Spring meeting of KIChE, 0, 0, - (0000)
  • Anodic aluminum oxide nano-template devices, UKC2006, 0, 0, - (0000)
  • Microcantilevers with nanochannels, 10th annual conference of Korea Institute of Military Science and Technology, 0, 0, - (0000)
  • Size effects on the adhesion behavior in nanoscale, NANO KOREA 2006, 0, 0, - (0000)
  • Superhydrophobic sub-micro/nanostructures based on sand blast and polymer-sticking phenomenon, NANO KOREA 2006, 0, 0, - (0000)
  • Anodic aluminum oxide nano-template devices, IUMRS-ICA-2006, 0, 0, - (0000)
  • Sonochemical growth of vertically aligned ZnO nanorod arrays over large areas, fall meeting of 232nd ACS national meeting, 0, 0, - (0000)
  • Fabrication of microchannel with nanopillar array using micromachined AAO, Micro- and Nano- Engineering, 0, 0, - (0000)
  • Adhesion and friction behavior of nanohoneycomb structures according to the pore size, WCARP-III, 0, 0, - (0000)
  • Synthesis of carbon nanotubes by direct irradiation of Microwave signal, 3rd Japan-Korea Symposium on Carbon Nanotubes, 0, 0, - (0000)
  • Direct growth of metal nanowires on polymeric substrates by microwave irradiation, 7th Korea-Japan Symposium on Materials, 0, 0, - (0000)
  • Fabrication of silicon nanowires for the electrode material of secondary Li batteries, 7th Korea-Japan Symposium on Materials, 0, 0, - (0000)
  • Microcantilevers with nanochannels, 7th Korea-Japan Symposium on Materials, 0, 0, - (0000)
  • Modification of carbon fibers using electromagnetic waves, , 0, 0, - (0000)
  • Sonochemical growth of well-aligned ZnO nanorods on substrates, 7th Korea-Japan Symposium on Materials, 0, 0, - (0000)
  • Sonochemical synthesis transition metal-doped ZnO nanorod arrays on the substrate, 7th Korea-Japan Symposium on Materials, 0, 0, - (0000)
  • Synthesis of carbon nanotubes by direct irradiation of microwave signal, IEEE Nanotechnology Materials and Devices Conference 2006, 0, 0, - (0000)
  • Fabrication of nano vacuum tube arrays using anodic aluminum oxide nano-template, Fall meeting of KIChE, 0, 0, - (0000)
  • Modification of carbon fibers using electromagnetic waves, Fall meeting of KIChE, 0, 0, - (0000)
  • Synthesis of silicon nanowires from Si powder and their electrophoretic fabrication, Fall meeting of KIChE, 0, 0, - (0000)
  • Fabrication of superhydrophobic sub-micro and nanostructures based on anodic aluminum oxide, 3rd Int. Congress of Nanotechnology (ICNT2006), 0, 0, - (0000)
  • Superhydrophobic micro- and nanostructures based on polymer sticking, 5th Asian-Australian conference on composite materials (ACCM-5), 0, 0, - (0000)
  • Young’s modulus of nanohoneycomb structures according to the porosity, 5th Asian-Australian conference on composite materials (ACCM-5), 0, 0, - (0000)
  • Device applications of anodic aluminum oxide, The 99th national meeting of the Korean Chemical Society, 0, 0, - (0000)
  • Microwave synthesis of nanomaterials, Spring meeting of the KIChE, 0, 0, - (0000)
  • controlled electrochemical dissolution of anodic aluminum oxide for the preparation of open-through pore structure, ChinaNANO 2007, 0, 0, - (0000)
  • Fabrication of nano vacuum tube arrays using anodic aluminum oxide nano-templates, ChinaNANO 2007, 0, 0, - (0000)
  • Fabrication of silicon nanowire anodes for Li ion batteries, ChinaNANO 2007, 0, 0, - (0000)
  • Formation of nano-jackets on carbon fibers using electromagnetic waves, ChinaNANO 2007, 0, 0, - (0000)
  • Hierarchical carbon fiber composites (part I), 6th US-Korea Workshop on Nanostructured Materials, 0, 0, - (0000)
  • Synthesis of Si nanowires for the anode material of Li batteries, 6th US-Korea Workshop on Nanostructured Materials, 0, 0, - (0000)
  • The effect of nano-scale structures for the wettability of a solid surface, ChinaNANO 2007, 0, 0, - (0000)
  • Transversely isotropic material properties of nanohoneycomb structures, ChinaNANO 2007, 0, 0, - (0000)
  • Microwave synthesis of nanomaterials, 2007 Texas-Korea Nanotech Workshop, 0, 0, - (0000)
  • Microwave synthesis of nanomaterials, The 5th International Conference on Separation Technology (ICSST’2007), 0, 0, - (0000)
  • Fabrication of Nano-vauum Tube Arrays Using Anodic Aluminum Oxide Nano-template, The 9th Cross Straits Symposium on Materials, Energy and Environmental Engineering (CSS 9), 0, 0, - (0000)
  • Sonochemical Preparation Of Shape-Selective ZnO Nanostructures, The 9th Cross Straits Symposium on Materials, Energy and Environmental Engineering (CSS 9), 0, 0, - (0000)
  • Surface Treatment Of Carbon Fibers Using Electromagnetic Waves, The 9th Cross Straits Symposium on Materials, Energy and Environmental Engineering (CSS 9), 0, 0, - (0000)
  • Guidelines for the use of SEM and/or TEM for the measurement of inner/outer diameter of multi-walled carbon nanotubes, he 4th ISO/TC 229/WG 2 (measurement and characterization) Meeting, 0, 0, - (0000)

단행본

  • SEMICONDUCTOR NANOMATERIALS FOR FLEXIBLE TECHNOLOGIES, William Andrew, , (2010)
  • Nanotube-Based Devices, Materials Research Society, , (2003)
  • Electrically Based Microstructural Characterization III, Materials Research Society, , (2002)
  • Cold Cathodes, The electrochemical Society Inc., , (2001)
  • 화학 및 공학의 열역학, 범한서적(주), 602, 이건홍 (1994)

연구실적

  • 전극용 나노 탄소소재의 합성 및 평가, (주)엘지화학기술연구원 (2001-2002)
  • POROUS SI 전극개발, (주)엘지화학기술연구원 (2002-2003)
  • 탄소나노튜브 FIELD EMITTER 개발연구, LG전자㈜LG종합기술원 (2001-2001)
  • MULTIWALL 탄소 나노튜브 기상합성법 개발, 일진나노텍㈜ (2001-2002)
  • NANO POROUS MASK, 삼성전자(주) (2002-2003)
  • D-PAPER용 마이크로 CELL형성 연구, 한양대학교 (2002-2002)
  • D-PAPER용 마이크로 CELL형성 연구, 한양대학교 (2002-2003)
  • 양극 산화 알루미늄 템플레이트를 이용한 탄소 나노튜브 합성, 한양대학교 (2002-2003)
  • 나노진공관 어레이 개발, 국방과학연구소 (2002-2003)
  • 나노템플레이트 제작 및 나노패턴 표면 현상, 국방과학연구소 (2002-2003)
  • CDI 공정을 이용한 정수 시스템의 타당성 조사(기획과제), (주)포스코 (2001-2001)
  • CDI용 고도정수 단위셀 개발, (주)포스코 (2001-2002)
  • CDI용 고도정수 단위셀 개발(2), (주)포스코 (2002-2003)
  • LOW TEMPERATURE SYNTHEIS OF CARBON NANOTUBES BY DI, 포항공과대학교 (2003-2005)
  • FABRICATION OF FLEXIBLE FIELS EMITTERS, 포항공과대학교 (2005-2005)
  • MICROWAVE SYNTHESIS OF NANO-MATERIALS, 포항공과대학교 (2005-2006)
  • CU FOIL과 금속박막의 응력해소, (주)엘지화학기술연구원 (2003-2004)
  • CU FOIL 과 금속박막의 응력해소, (주)엘지화학기술연구원 (2004-2005)
  • 백라이트용 면광원 개발, [삭제]삼성전자(주)기흥공장 (2004-2005)
  • 양극산화 알루미늄 템플레이트를 이용한 탄소 나노튜브 합성, 삼성전자(주) (2003-2004)
  • 나노진공관 어레이 개발, 한국과학기술기획평가원 (2003-2004)
  • 나노템플레이트 제작 및 나노패턴 표면형성, 고려대학교 (2003-2004)
  • 양극산화 알루미늄 템플레이트를 이용한 탄소나노튜브 합성, 삼성전자(주) (2004-2005)
  • 나노 진공관 어레이 개발, 한국과학기술기획평가원 (2004-2005)
  • 나노 템플레이트 제작 및 나노패턴 표면형성, 고려대학교 (2004-2005)
  • S_직접비_이건홍, 포항공과대학교 (2003-2020)
  • 백라이트용 면광원 개발, [삭제]삼성전자(주)기흥공장 (2005-2006)
  • 인건비풀링과제, 포항공과대학교 (2006-2015)
  • 자체연구개발과제, 포항공과대학교 (2006-2016)
  • SYNTHESIS OF SI NANOWIRES FOR AN ANODE MATERIAL O, 기타기관 (2006-2008)
  • 전기흡착을 이용한 탈염기술 개발연구(1-1), 포스코신기술연구조합 (2006-2007)
  • 전기흡착을 이용한 탈염기술 개발(1-1), 포항공과대학교 산학협력단 (2006-2007)
  • 백라이트용 면광원 개발, [삭제]삼성전자(주)기흥공장 (2006-2007)
  • 마이크로웨이브를 이용한 제올라이트 합성, 포항공과대학교 (2007-2007)
  • 축자적구조의 탄소섬유 복합재료, (재)국제과학기술협력재단 (2007-2008)
  • 나노 측정기술 국제표준 개발, 나노산업기술연구조합 (2007-2008)
  • 마이크로 웨이브를 이용한 철강 균일 제거[철강기초], 포항공과대학교 산학협력단 (2008-2009)
  • 축자적 구조의 탄소섬유 복합재료, (재)국제과학기술협력재단 (2008-2009)
  • DAN를 이용한 METALLIC/SEMICONDUCTING SWNT 분리, 포항공과대학교 (2008-2008)
  • 기능성 카본나노튜브 제조장치 성능평가, 나노산업기술연구조합 (2008-2009)
  • 다중벽탄소나노튜브 계량,계측기술 국제표준 개발, 나노산업기술연구조합 (2008-2009)
  • 이산화탄소 포집용 하이드레이트 형성에 관한 기초연구, (재)포항산업과학연구원 (2008-2009)
  • 촉진제를 이용한 수소하이드레이트의 상평형 및 MOLECULE DYNAMICS SIMULATION 해석, 한국생산기술연구원 (2008-2009)
  • 화학소재 미세구조 전문 인력양성사업, 한국화학연구원 (2008-2009)
  • 가스 하이드레이트 형성 원리를 이용한 철강공정 배기가스 중 CO2 분리기술 연구, (재)한국에너지자원기술기획평 (2009-2010)
  • 다중벽탄소나노튜브(MWCNT)계량.계측기술 국제표준 개발, 나노산업기술연구조합 (2009-2010)
  • 축자적 구조의 탄소섬유 복합재료, (재)국제과학기술협력재단 (2009-2010)
  • 학생인건비 풀링과제, 포항공대산학협력단 (2009-2020)
  • 마이크로웨이브 화학반응의 공학적 기반 확립, 한국과학재단 (2009-2010)
  • 탄소나노튜브 포레스트를 이용한 탄소나노튜브 YARN의 제조, 현대엔지비(주) (2009-2010)
  • 2009년도 미공군연구실지원사업 위탁(외화)과제, (재)국제과학기술협력재단 (2009-2010)
  • 촉진제를 이용한 수소하이드레이트의 상평형 및 MOLECULE DYNAMICS SIMULATION 해석, 한국생산기술연구원 (2009-2010)
  • 탄소나노튜브 포레스트를 이용한 탄소나노튜브 YARN의 제조, 현대엔지비(주) (2009-2010)
  • 화학소재 미세구조 전문 인력양성사업, 한국화학연구원 (2009-2010)
  • CO2 HYDRATE 생성 및 억제 MECHANISM 규명 및 이용, (재)포항산업과학연구원 (2009-2010)
  • [GENESIS]탄소나노튜브(CNT)를 이용한 CNT YARN의 제조, (주)포스코 (2010-2010)
  • (전사) 리튬전지 음극재 전도도 향상기구 규명 및 핵심소재 개발, (주)포스코 (2010-2010)
  • 마이크로웨이브 화학반응의 공학적 기반 확립, 재단법인한국연구재단 (2010-2011)
  • 가스 하이드레이트 형성 원리를 이용한 철강공정 배기가스 중 CO2 분리기술 연구, 한국에너지기술평가원 (2010-2011)
  • 4.4128_1단계 1차년도 이월과제, 재단법인한국연구재단 (2010-2011)
  • 초고강도 CNT YARN의 제조 (학부생-김혜림), 포항공과대학교 (2010-2010)
  • 전자기파를 이용한 탄소재료의 흑연화 기술 (학부생-김태원), 포항공과대학교 (2010-2010)
  • 나노기술 표준화 기반 구축, 나노산업기술연구조합 (2010-2011)
  • 철원자를 함유한 천연 단백질로부터 탄소나노튜브 합성, 포항공대산학협력단 (2010-2010)
  • CO2 하이드레이트 생성 및 억제 MECHANISM 규명 및 이용 (2/2), (재)포항산업과학연구원 (2010-2011)
  • 초고강도 CNT YARN 제조, (주)포스코 (2011-2011)
  • 마이크로웨이브를 이용한 탄소재료의 흑연화, (주)포스코 (2011-2011)
  • 마이크로웨이브 흑연화의 압력 의존성, 포항공대산학협력단 (2011-2011)
  • 철 원자를 포함하는 단백질을 이용한 탄소나노튜브 합성 방법 개발, 포항공대산학협력단 (2011-2011)
  • 마이크로웨이브 화학반응의 공학적 기반 확립, 재단법인한국연구재단 (2011-2012)
  • 가스 하이드레이트 형성 원리를 이용한 철강공정 배기가스 중 CO2 분리기술 연구, 한국에너지기술평가원 (2011-2012)
  • 4.5140/5607 2년차 이월과제, 재단법인한국연구재단 (2011-2012)
  • (전사) 초고강도 CNT YARN 제조 (2/5), (주)포스코 (2012-2012)
  • 초고강도 탄소나노튜브 섬유 제작을 위한 긴 길이의 탄소 나노튜브 포레스트 합성기술 개발, (주)포스코 (2012-2012)
  • 마이크로웨이브 화학반응의 공학적 기반 확립, 재단법인한국연구재단 (2012-2013)
  • (안식년과제)흑연층간 화합물 정량분석 기술연구, (재)포항산업과학연구원 (2012-2013)
  • 가스 하이드레이트를 이용한 해수 담수화 기술 개발, (재)포항산업과학연구원 (2012-2013)
  • 초고강도 CNT YARN 제조, (주)포스코 (2013-2013)
  • 긴 길이의 탄소나노튜브 포레스트 합성기술 개발, 포항공대산학협력단 (2013-2013)
  • 흑연 층간 화합물 합성 및 분석, (주)포스코 (2013-2013)
  • 마이크로웨이브 화학반응의 공학적 기반 확립, 재단법인한국연구재단 (2013-2014)
  • (이태선-화공)직방법을 이용한 탄소나노튜브 섬유 합성, 포항공과대학교 (2013-2013)
  • 4.7912_2차년도1단계 이월과제, 재단법인한국연구재단 (2013-2014)
  • 흑연층간화합물 정량분석 기술연구, 포항공대산학협력단 (2013-2013)
  • BK21 화공사업단 산학협동 사업, (주)엘지화학 (2013-2014)
  • 흑연 층간 화합물 팽창 박리 공정 개선을 통한 고품질 그래핀 제조, (주)포스코 (2013-2014)
  • BK21플러스 화공창의융합 인재양성사업단 도레이첨단소재 산학협동과제, 도레이첨단소재(주)구미3공장 (2013-2015)
  • [학연협동]가스하이드레이트 기술을 이용한 해수담수화 기반연구, (재)포항산업과학연구원 (2013-2014)
  • 흑연 층간 화합물 팽창 박리 공정 개선을 통한 고품질 그래핀 제조, 포항공대산학협력단 (2013-2014)
  • S_간접비_이건홍, 포항공과대학교 (2014-2020)
  • 극한 인장강도의 탄소나노튜브 섬유 제조 기술 연구, 재단법인한국연구재단 (2014-2015)
  • 탄소 나노튜브 섬유의 강도증가 연구, (주)엘지화학 (2014-2015)
  • BK21 화공사업단 산학협동사업, (주)엘지화학 (2014-2015)
  • BK21+ 화공창의융합 인재양성사업단 도레이첨단소재 산학협동과제(2차년도), 도레이첨단소재(주)구미3공장 (2014-2015)
  • 10102749(학과공용장비)_UV-VIS SPECTROPHOTOMETER, 포항공과대학교 (2015-2016)
  • 10102901(학과공용장비)_DESKTOP MINI-SEM, 포항공과대학교 (2015-2016)
  • 10103179(학과공용장비)_GEL PERMEATION CHROMATOGRAPHY, 포항공과대학교 (2015-2016)
  • 10061490(학과공용장비)_HPLC SYSTEM, 포항공과대학교 (2015-2016)
  • 10061492(학과공용장비)_TRANSIENT ABSOPTION, 포항공과대학교 (2015-2016)
  • 10063278(학과공용장비)_PHOTON SPECTROMETER,FP-6500, 포항공과대학교 (2015-2016)
  • 10091416(학과공용장비)_NANO PARTICLE SIZE ANALYZER, 포항공과대학교 (2015-2016)
  • 10100050(학과공용장비)_USED VEECO SCENTRIS, 포항공과대학교 (2015-2016)
  • R_직접비_10102004_BET & PORE ANALYZER, 포항공과대학교 (2015-2020)
  • BK21+화공창의융합 인재양성사업단 도레이첨단소재 산학협동과제(3차년도), 도레이첨단소재(주)구미3공장 (2015-2016)
  • HYDRATE 상평형 DATA, (재)포항산업과학연구원 (2014-2015)
  • 극한 인장강도의 탄소나노튜브 섬유 제조 기술 연구, 재단법인한국연구재단 (2015-2016)
  • 화학공학과 기술료수입 배분과제, 포항공과대학교 (2015-2016)
  • 4.11100_1단계 1차년도 이월과제, 재단법인한국연구재단 (2015-2016)
  • 탄소 나노튜브 섬유의 강도증가 연구, (주)엘지화학 (2015-2016)
  • 자체연구개발과제[2015년 신설], 포항공과대학교 (2015-2022)
  • BK21 화공사업단 산학협동사업, (주)엘지화학 (2015-2016)
  • [화공]교육기자재 지원(학과), 포항공과대학교 (2016-2017)
  • BK21+화공창의융합 인재양성사업단 도레이첨단소재 산학협동과제(4차년도), 도레이첨단소재(주)구미3공장 (2016-2017)
  • 극한 인장강도의 탄소나노튜브 섬유 제조 기술 연구, 재단법인한국연구재단 (2016-2017)
  • 탄소 나노튜브 섬유의 강도증가 연구, (주)엘지화학 (2016-2017)
  • 4.12209_1단계 2차년도 이월과제, 재단법인한국연구재단 (2016-2017)
  • 김철주_신규부임교수 기자재지원(1차_학과), 포항공과대학교 (2016-2017)
  • BK21 화공사업단 산학협동사업, (주)엘지화학 (2016-2017)
  • 긴 길이의 탄소나노튜브 합성 기술 개발, 한국과학기술연구원 (2017-2017)
  • BK21+화공창의융합 인재양성사업단 도레이첨단소재 산학협동과제(5차년도), 도레이첨단소재(주)구미3공장 (2017-2018)
  • [화공]지식재산출원등록비 연구자별 과제, 포항공대산학협력단 (2017-2029)
  • 탄소 나노튜브 섬유의 강도증가 연구, (주)엘지화학 (2017-2018)
  • 기술료 연구개발재투자과제, 포항공대산학협력단 (2017-2018)
  • BK21 화공사업단 산학협동사업, (주)엘지화학 (2017-2018)
  • 4.0013376_4차년도 이월과제, 재단법인한국연구재단 (2017-2018)
  • 긴 길이의 탄소나노튜브 합성 기술 개발, 한국과학기술연구원 (2018-2018)
  • BK21+화공창의융합 인재양성사업단 도레이첨단소재 산학협동과제(6차년도), 도레이첨단소재(주)구미3공장 (2018-2019)
  • 탄소 나노튜브 길이 측정, (주)엘지화학 (2018-2019)
  • BK21 화공사업단 산학협동사업, (주)엘지화학 (2018-2019)
  • 긴 길이의 탄소나노튜브 합성 기술 개발, 한국과학기술연구원 (2019-2019)

IP

  • 이건홍,오유진,김주한,김지은,이원재,조현정, 탄소나노튜브 섬유 및 그 제조방법, 한국, 10-2018-0026630 (2018)
  • 이건홍,오유진,김주한,김지은,이원재,조현정, 탄소나노튜브 섬유 및 그 제조방법, 한국, 10-2018-0026629 (2018)
  • 조현정,이건홍,오유진,김주한,김지은,이원재, 정렬도가 향상된 탄소나노튜브 섬유 집합체 제조 방법, -, PCT/KR2017/0119 (2018)
  • 이건홍,오유진,김지은,김주한,이원재,조현정, 고밀도 및 고강도 탄소나노튜브 섬유의 제조방법 및 평가방법, 한국, 10-2017-0167871 (2018)
  • 김혜림,이성현,이건홍, 마이크로웨이브를 이용한 그래핀의 제조방법, 한국, 10-2017-0172221 (2017)
  • 이태선,이건홍, 탄소나노튜브 섬유제조 장치 및 이를 이용한 탄소나노튜브 섬유제조 방법, 한국, 10-2017-0021168 (2017)
  • 조현정,이건홍,오유진,김주한,김지은,이원재, 정렬도가 향상된 탄소나노튜브 섬유 집합체 제조 방법, 한국, 10-2016-0143313 (2016)
  • 이은영,이건홍, 마이크로파를 이용한 초발수성 스테인리스강 제조 방법, 한국, 10-2017-0023565 (2016)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 독일, 07768622.8 (2016)
  • 이건홍,이재근,정아름, 탄소나노튜브 섬유 및 그 제조방법, 오스트레일리아, 2014391194 (2016)
  • 이건홍,이재근,정아름, 탄소나노튜브 섬유 및 그 제조방법, 중국, 201480077980.3 (2016)
  • 이건홍,이재근,정아름, 탄소나노튜브 섬유 및 그 제조방법, 일본, 2016-563031 (2016)
  • 이건홍,이재근,정아름, 탄소나노튜브 섬유 및 그 제조방법, 일본, 2016-563031 (2016)
  • 이건홍,이재근,정아름, 탄소나노튜브 섬유 및 그 제조방법, USA, 15/304,192 (2016)
  • 이건홍,이재근,정아름, 탄소나노튜브 섬유 및 그 제조방법, EP, 14889594.9 (2016)
  • 이건홍,임용오, 비강도가 증가된 탄소나노튜브 섬유 제조 방법 및 이에 의한 탄소나노튜브 섬유, 한국, 10-2016-0068261 (2016)
  • 김태원,이건홍, 마이크로웨이브를 이용한 바이오매스 수열 탄화 기술, 한국, 10-2016-0078790 (2016)
  • 이건홍,이철훈,이재근, 탄소나노튜브 합성법, 한국, 10-2016-0057097 (2016)
  • 이건홍,이성현, 탄소나노튜브의 제조방법, 한국, 10-2016-0047769 (2016)
  • 이성현,이건홍, 탄소나노튜브의 제조방법, 한국, 10-2016-0047769 (2016)
  • 이건홍,김태원,조창신,이진우, 마이크로웨이브를 이용한 전지 음극제용 흑연 제조 방법, 한국, 10-2016-0017281 (2016)
  • 이건홍,김혜진,이재근,서상우, 중합된 단백질을 이용하여 탄소나노튜브를 제조하는 방법, USA, 14/762,363 (2015)
  • 이건홍,김태원, 마이크로웨이브를 이용한 흑연제조 방법, USA, 14/763,200 (2015)
  • 이건홍,이재근,정아름, 탄소나노튜브 섬유 및 그 제조방법, -, PCT/KR2014/0071 (2014)
  • 이건홍,정아름,이재근, 탄소나노튜브 섬유 및 그 제조방법, 한국, 10-2014-0046277 (2014)
  • 이건홍,정아름,이재근, 탄소나노튜브 섬유 및 그 제조방법, 한국, 10-2014-0046277 (2014)
  • 이건홍,김혜진,이재근,서상우, 중합된 단백질을 이용하여 탄소나노튜브를 제조하는 방법, -, PCT/KR2013/0082 (2013)
  • 이건홍,김태원, 마이크로웨이브를 이용한 흑연제조 방법, -, PCT/KR2014/0000 (2013)
  • 이건홍,김태원, 마이크로웨이브를 이용한 흑연제조 방법, 한국, 10-2013-0011796 (2013)
  • 이건홍,김태원, 마이크로웨이브를 이용한 흑연제조 방법, 한국, 10-2013-0011796 (2013)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, 독일, 06823877.3 (2012)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, EP, 06823877.3 (2012)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, EP, 06823877.3 (2012)
  • 이건홍,김혜진,이재근,서상우, 중합된 단백질을 이용하여 탄소나노튜브를 제조하는 방법, 한국, 10-2013-0007419 (2012)
  • 이건홍,김혜진,이재근,서상우, 중합된 단백질을 이용하여 탄소나노튜브를 제조하는 방법, 한국, 10-2013-0007419 (2012)
  • 이건홍,김희진,이재근, 탄소나노튜브 섬유사 제조방법 및 장치, 한국, 10-2012-0086424 (2012)
  • 이건홍,김희진,이재근, 탄소나노튜브 섬유사 제조방법 및 장치, 한국, 10-2012-0086424 (2012)
  • 전상민,이문찬,이건홍, 마이크로캔틸리버를 이용하여 나노 입자를 크기별로 분류하여 검출하는 방법, 한국, 10-2012-0075248 (2012)
  • 전상민,이문찬,이건홍, 마이크로캔틸리버를 이용하여 나노 입자를 크기별로 분류하여 검출하는 방법, 한국, 10-2012-0075248 (2012)
  • 이건홍,김희진,이재근, 초고강도 탄소나노튜브 섬유사 제조방법, 한국, 10-2012-0056207 (2012)
  • 이건홍,김희진,이재근, 초고강도 탄소나노튜브 섬유사 제조방법, 한국, 10-2012-0056207 (2012)
  • 이건홍,김희진, 단일 단계 반응에 의한 가교결합된 탄소나노튜브 다발 제조 방법, 한국, 10-2011-0100661 (2011)
  • 이건홍,오유진,이재근,이보람,조승호,김혜진, 탄소 섬유 표면에 대한 접착력이 향상된 탄소 섬유-탄소 나노튜브 복합체와 그 제조 방법, 한국, 10-2011-0018511 (2010)
  • 이건홍,오유진,이재근,이보람,조승호,김혜진, 탄소 섬유 표면에 대한 접착력이 향상된 탄소 섬유-탄소 나노튜브 복합체와 그 제조 방법, 한국, 10-2011-0018511 (2010)
  • 이건홍,이보람,박다혜,사정훈,전상민, 기억 효과를 이용한 가스 하이드레이트의 연속적 상평형 측정 방법, 한국, 10-2011-0018510 (2010)
  • 이건홍,이보람,박다혜,사정훈,전상민, 기억 효과를 이용한 가스 하이드레이트의 연속적 상평형 측정 방법, 한국, 10-2011-0018510 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 오스트레일리아, 2009224143 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 오스트레일리아, 2009224143 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 알루미늄 포일을 이용한 내부표면에 소수성 특성을 갖는 구조물 제조방법, 오스트레일리아, 2009224143 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 중국, 200980108590.7 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 중국, 200980108590.7 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 알루미늄 포일을 이용한 내부표면에 소수성 특성을 갖는 구조물 제조방법, 중국, 200980108590.7 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 일본, 2010-550598 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 일본, 2010-550598 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, USA, 12/921,585 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, USA, 12/921,585 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, -, 09718737.1 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, EP, 09718737.1 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 오스트레일리아, 2009224145 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 오스트레일리아, 2009224145 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 중국, 200980108668.5 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 일본, 2010-550600 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 일본, 2010-550600 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, USA, 12/921,217 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, USA, 12/921,217 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, USA, 12/921,217 (2010)
  • 김동섭,이상민,이건홍,김준원,임근배,박현철,이병주,황운봉, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2010-0002333 (2010)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2010-0002333 (2010)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, 오스트레일리아, 2008325522 (2009)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, 오스트레일리아, 2008325522 (2009)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, 중국, 200880123181.X (2009)
  • 김동섭,김동현,이상민,박현철,이건홍,임근배,김준원,황운봉, 외부표면에 소수성 특성을 갖는 구조물 제조방법, 일본, 추후통보 (2009)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, 일본, 2010-532985 (2009)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, 일본, 2010-532985 (2009)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, USA, 12/741,058 (2009)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, USA, 12/741,058 (2009)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, -, 08723436.5 (2009)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, EP, 08723436.5 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, 오스트레일리아, 2008283218 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, 오스트레일리아, 2008283218 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, 중국, 200880101334.0 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, 중국, 200880101334.0 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, 일본, 2010-519135 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, 일본, 2010-519135 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, USA, 12/452,873 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, USA, 12/452,873 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, -, 08723435.7 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, EP, 08723435.7 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, 중국, 200780042283.4 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, 중국, 200780042283.4 (2009)
  • 김동섭,이상민,김동현,김준원,박현철,이건홍,황운봉,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, 일본, 추후통보 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, 일본, 2009-529119 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, 일본, 2009-529119 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, USA, 12/442,321 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, USA, 12/442,321 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, USA, 12/442,321 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, EP, 07808340.9 (2009)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, -, 07808340.9 (2009)
  • 이유진,이건홍, 電磁気波放射による炭素繊維の改質, 일본, 추후통보 (2009)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, 일본, 2009-521685 (2009)
  • 이유진,이건홍, MODIFICATION OF CARBON FIBERS BY MEANS OF ELECTROMAGNETIC WAVE IRRADIATION, USA, 12/374,072 (2009)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, USA, 12/374,072 (2009)
  • 이유진,이건홍, MODIFICATION OF CARBON FIBERS BY MEANS OF ELECTROMAGNETIC WAVE IRRADIATION, EP, 06823877.3 (2009)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, -, 06823877.3 (2009)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, EP, 06823877.3 (2009)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, 영국, 06823877.3 (2009)
  • 황운봉,박현철,김동현,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, USA, 12/307,185 (2008)
  • 박현철,황운봉,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 중국, 추후통보 (2008)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 중국, 200780025221.2 (2008)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 중국, 200780025221.2 (2008)
  • 박현철,황운봉,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 일본, 추후통보 (2008)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 일본, 2009-517998 (2008)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 일본, 2009-517998 (2008)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, USA, 12/306,489 (2008)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, EP, 07768622.8 (2008)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, -, 07768622.8 (2008)
  • 이건홍,이평수,이정현,신나영, 나노 크기의 미세홀을 갖는 멀티스케일 캔티레버 구조물 및 그 제조방법, USA, 12/245,940 (2008)
  • 이건홍,이평수,이정현,신나영, 나노 크기의 미세홀을 갖는 멀티스케일 캔티레버 구조물 및 그 제조방법, USA, 12/245,940 (2008)
  • 이건홍,김은하,심대섭,윤범진, 나노와이어의 제조방법 및 나노와이어가 성장된 기판, 한국, 10-2005-0098533 (2008)
  • 박현철,김영득,이건홍,황운봉,김혜진, AAO(Anodic Aluminum Oxide)를 감습층(humidity sensing layer)으로 이용한 습도센서의 전극 설계, USA, 12/617,848 (2008)
  • 박현철,김영득,이건홍,황운봉,김혜진, AAO(Anodic Aluminum Oxide)를 감습층(humidity sensing layer)으로 이용한 습도센서의 전극 설계, USA, 12/617,848 (2008)
  • 김영득,박현철,이건홍,황운봉,김혜진, AAO(Anodic Aluminum Oxide)를 감습층(humidity sensing layer)으로 이용한 습도센서의 전극 설계, 한국, 10-2008-0113487 (2008)
  • 박현철,김영득,이건홍,황운봉,김혜진, AAO(Anodic Aluminum Oxide)를 감습층(humidity sensing layer)으로 이용한 습도센서의 전극 설계, 한국, 10-2008-0113487 (2008)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, PCT, PCT/KR2009/0012 (2007)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, -, PCT/KR2009/0012 (2007)
  • 김동섭,이상민,이건홍,김준원,임근배,박현철,이병주,황운봉, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2008-0024029 (2007)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 담금법을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2008-0024029 (2007)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, PCT, PCT/KR2009/0012 (2007)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, -, PCT/KR2009/0012 (2007)
  • 김동섭,이상민,이건홍,김준원,임근배,박현철,이병주,황운봉, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2008-0024028 (2007)
  • 황운봉,김동섭,이상민,이건홍,김준원,임근배,박현철,이병주, 금속 포일을 이용한 소수성 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2008-0024028 (2007)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, 한국, 10-2007-0098933 (2007)
  • 이건홍,신나영,이정현,이평수, Multi-scale cantilever structures having nano sized holes and method of preparing the same, 중국, 200610164646.9 (2007)
  • 이건홍,신나영,이정현,이평수, Multi-scale cantilever structures having nano sized holes and method of preparing the same, 중국, 200610164646.9 (2007)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, -, PCT/KR2008/0013 (2007)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 외부표면에 소수성 특성을 갖는 구조물 제조방법, PCT, PCT/KR2008/0013 (2007)
  • 김동섭,김동현,이상민,박현철,이건홍,임근배,김준원,황운봉, 소수성 외부 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2007-0112688 (2007)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 소수성 외부 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2007-0112688 (2007)
  • 황운봉,김동섭,김동현,이상민,박현철,이건홍,임근배,김준원, 소수성 외부 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2007-0112688 (2007)
  • 박현철,황운봉,김동현,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 한국, 10-2007-0067773 (2007)
  • 황운봉,박현철,김동현,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 한국, 10-2007-0067773 (2007)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 한국, 10-2007-0067775 (2007)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, -, PCT/KR2008/0013 (2007)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 내부표면에 소수성 특성을 갖는 구조물 제조방법, PCT, PCT/KR2008/0013 (2007)
  • 김동섭,이상민,김동현,김준원,박현철,이건홍,임근배,황운봉, 소수성 내부 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2007-0077497 (2007)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 소수성 내부 표면을 갖는 3차원 형상 구조물의 제조방법, 한국, 10-2007-0077497 (2007)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, -, PCT/KR2007/0045 (2007)
  • 황운봉,김동섭,이상민,김동현,김준원,박현철,이건홍,임근배, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, PCT, PCT/KR2007/0045 (2007)
  • 황운봉,박현철,김동현,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, -, PCT/KR2007/0032 (2007)
  • 황운봉,박현철,김동현,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, PCT, PCT/KR2007/0032 (2007)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, -, PCT/KR2007/0032 (2007)
  • 황운봉,박현철,김동현,김준원,이건홍, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, PCT, PCT/KR2007/0032 (2007)
  • 이유진,이건홍, Modification of carbon gibers by means of electromagnetic wave irradiation, -, PCT/KR2006/0051 (1992)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, -, PCT/KR2006/0051 (1992)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, PCT, PCT/KR2006/0051 (1992)
  • 이정현,이평수,신나영,이건홍, Multi-scale cantilever structures having nano sized holes and method of preparing the same, 일본, 2006-293074 (1992)
  • 이건홍,이정현,이평수,신나영, 나노 크기의 미세홀을 갖는 멀티스케일 캔티레버 구조물 및 그 제조방법, 일본, 2006-293074 (1992)
  • 이정현,이평수,신나영,이건홍, Multi-scale cantilever structures having nano sized holes and method of preparing the same, 일본, 2006-293074 (1992)
  • 이정현,이평수,신나영,이건홍, Multi-scale cantilever structures having nano sized holes and method of preparing the same, USA, 11/553,283 (1992)
  • 이건홍,이정현,이평수,신나영, 나노 크기의 미세홀을 갖는 멀티스케일 캔티레버 구조물 및 그 제조방법, USA, 11/553,283 (1992)
  • 이건홍,이정현,이평수, 나노 크기의 미세홀을 갖는 멀티스케일 캔티레버 구조물 및 그 제조 방법, 한국, 10-2005-0101748 (1992)
  • 한종훈,황용준,이건홍, 화학 열펌프용 반응 블록의 제조방법, 한국, 10-2000-0012004 (1992)
  • 이건홍,황선규,정수환, 필드 에미터 어레이 및 그 제조 방법 및 상기 필드 에이터 어레이를 포함하는 필드 에미터 디스플레이, 한국, 10-2004-0036947 (1992)
  • 이건홍,이유진, 전자기파 방사를 통한 탄소섬유의 표면 개질, 한국, 10-2006-0068557 (1992)
  • 이유진,이건홍, 전자기파 방사를 통한 탄소섬유의 표면 개질, 한국, 10-2006-0068557 (1992)
  • 황운봉,이건홍,김동현,김준원,박현철, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 한국, 10-2006-0063101 (1992)
  • 황운봉,이건홍,이상민,배일신,최덕현,이창우,손성호,문태철,박현철,김동현,김동섭,전지훈,김준원, 극소수성 표면 구조물을 갖는 고체기재의 가공방법 및 이를 이용한 극소수성 유체 이송관, 한국, 10-2006-0091771 (1992)
  • 황운봉,이건홍,김동현,박현철, 극소수성 표면 가공방법 및 이 방법으로 제조된 극소수성 표면 구조물을 갖는 고체 기재, 한국, 10-2006-0062963 (1992)
  • 이옥주,황선규,이건홍, Field emission display having integrated triode structure and method for manufacturing the same, 일본, 2004-566336 (1992)
  • 이건홍,이옥주,황선규, 일체형 3극구조 전계방출 디스플레이 및 그 제조방법, 일본, 2004-566336 (1992)
  • 이옥주,황선규,이건홍, Field emission display having integrated triode structure and method for manufacturing the same, 일본, 2004-566336 (1992)
  • 이옥주,황선규,이건홍, Field emission display having integrated triode structure and method for manufacturing the same, USA, 10/542,378 (1992)
  • 이건홍,이옥주,황선규, 일체형 3극구조 전계방출 디스플레이 및 그 제조방법, USA, 10/542,378 (1992)
  • 이옥주,황선규,이건홍, Field emission display having integrated triode structure and method for manufacturing the same, USA, 10/542,378 (1992)
  • 이건홍,이옥주,황선규, 일체형 3극 구조 전계방출 디스플레이 및 그 제조방법, 중국, 200380108868.3 (1992)
  • 이옥주,황선규,이건홍, Field emission display with integrated triode structure and method for manufacturing the same, 중국, 200380108868.3 (1992)
  • 이옥주,황선규,이건홍, Field emission display with integrated triode structure and method for manufacturing the same, 중국, 200380108868.3 (1992)
  • 이건홍,이옥주,황선규, 일체형 3극 구조 전계방출 디스플레이 및 그 제조방법, EP, 03779024.3 (1992)
  • 이옥주,황선규,이건홍, Field emission display with integrated triode structure and method for manufacturing the same, EP, 03779024.3 (1992)
  • 이건홍,이옥주,황선규, 일체형 3극 구조 전계방출 디스플레이 및 그 제조방법, -, 03779024.3 (1992)
  • 이건홍,심대섭,윤범진,김은하, 촉매의 사용없이 전자기파 방사를 통한 나노와이어의 제조 방법 및 그에 의해 제조된 나도와이어, 한국, 10-2005-0110074 (1992)
  • 황선규,정수환,이건홍,이응주, Electric field emission device having a triode structure fabricated by using an anodoc oxidation process and method for fabricating same, 중국, 03823411.4 (1992)
  • 이건홍,황선규,정수환,이응주, 양극 산화 공정을 이용한 일체형 삼극 구조 전계방출 소자 및 그 제조방법, 중국, 03823411.4 (1992)
  • 황선규,정수환,이건홍,이응주, Electric field emission device having a triode structure fabricated by using an anodoc oxidation process and method for fabricating same, 중국, 03823411.4 (1992)
  • 황선규,정수환,이건홍, Electric field emission device having a triode structure fabricated by using an anodoc oxidation process and method for fabricating same, 일본, 2004-524373 (1992)
  • 이건홍,황선규,정수환, 양극 산화 공정을 이용한 일체형 삼극 구조 전계방출 소자 및 그 제조방법, 일본, 2004-524373 (1992)
  • 황선규,정수환,이건홍, Electric field emission device having a triode structure fabricated by using an anodoc oxidation process and method for fabricating same, USA, 10/522,572 (1992)
  • 황선규,정수환,이건홍, Electric field emission device having a triode structure fabricated by using an anodoc oxidation process and method for fabricating same, USA, 10/522,572 (1992)
  • 이건홍,황선규,정수환, 양극 산화공정을 이용한 일체형 삼극구조 전계방출 소자 및 그 제조방법, USA, 10/522,572 (1992)
  • 이건홍,윤동명,윤범진, 고체상의 탄소를 탄소소스로 한 탄소나노튜브 제조방법, 한국, 10-2005-0021270 (1992)
  • 이건홍,황선규,이옥주, 일체형 3극구조 전계방출 디스플레이 및 그 제조방법, 한국, 10-2003-0093175 (1992)
  • 황선규,이옥주,이건홍, Field emission display with integrated triode structure and method for manufacturing the same, -, PCT/KR2003/0285 (1992)
  • 이건홍,황선규,이옥주, 일체형 3극구조 전계방출 디스플레이 및 그 제조방법, -, PCT/KR2003/0285 (1992)
  • 이건홍,황선규,이옥주, 일체형 3극구조 전계방출 디스플레이 및 그 제조방법, PCT, PCT/KR2003/0285 (1992)
  • 이건홍,황선규,이옥주, 일체형 3극구조 전계방출 디스플레이 및 그 제조방법, 한국, 10-2003-0002716 (1992)
  • 이건홍,황선규,정수환, 양극산화공정을 이용한 일체형 삼극구조 전계방출소자 및 그 제조방법, 한국, 10-2002-0058158 (1992)
  • 이건홍,성수환, 고분자 함침 복합 분리막 및 그 제조 방법, 한국, 10-1998-0029087 (1992)
  • 이건홍,황선규,정수환, Electric field emission device having a triode structure fabricated by using an anodoc oxidation process and method for fabricating same, -, PCT/KR2003/0015 (1992)
  • 이건홍,황선규,정수환, 양극 산화공정을 이용한 일체형 삼극 구조 전계방출소자 및 그 제조방법, -, PCT/KR2003/0015 (1992)
  • 이건홍,황선규,정수환, 양극 산화공정을 이용한 일체형 삼극 구조 전계방출소자 및 그 제조방법, PCT, PCT/KR2003/0015 (1992)
  • 황선규,정수환,이건홍, 양극 산화공정을 이용한 일체형 3극 구조 전계방출소자 및 그 제조방법, 한국, 10-2002-0044921 (1992)
  • 이건홍,황선규,정수환, 양극 산화공정을 이용한 일체형 3극 구조 전계방출소자 및 그 제조방법, 한국, 10-2002-0058158 (1992)
  • 정수환,황희영,이건홍, 탄소 나노튜브를 이용한 전계방출소자 및 제조방법, 한국, 10-2001-0064781 (1992)
  • 이건홍,정수환,황희영, 탄소 나노튜브를 이용한 전계방출소자 및 제조방법, 한국, 10-2001-0064781 (1992)
  • 정수환,이옥주,이건홍, 탄소 나노튜브 전계방출소자 및 그 제조방법, 한국, 10-2001-0064696 (1992)
  • 이건홍,정수환,이옥주, 탄소 나노튜브 전계방출소자 및 그 제조방법, 한국, 10-2001-0064696 (1992)
  • 정수환,황희영,이건홍, 탄소나노튜브 합성 방법, 한국, 10-2001-0064782 (1992)
  • 이건홍,정수환,황희영, 탄소나노튜브 합성 방법, 한국, 10-2001-0064782 (1992)
  • 유창모,홍은화,이건홍,유재은,한종훈, 탄소나노튜브 합성방법 및 이에 이용되는 탄소나노튜브 합성장치, EP, 01303763.5-2111 (1992)
  • 이건홍,유창모,홍은화,유재은,한종훈, 탄소나노튜브 합성방법 및 이에 이용되는 탄소나노튜브 합성장치, EP, 01303763.5 (1992)
  • 이건홍,유창모,홍은화,유재은,한종훈, 탄소나노튜브 합성방법 및 이에 이용되는 탄소나노튜브 합성장치, -, 01303763.5 (1992)
  • 이건홍,김규영,성주환,이재명, 초소형 전지-축전기 하이브리드 소자 및 그 제조방법, 한국, 10-2001-0075277 (1992)
  • 이건홍,유창모,홍은화,유재은,한종훈, 탄소나노튜브 합성방법 및 이에 이용되는 탄소나노튜브 합성장치, 일본, 2001-226015 (1992)
  • 이건홍,유창모,홍은화,유재은,한종훈, 탄소나노튜브 합성방법 및 이에 이용되는 탄소나노튜브 합성장치, USA, 09/842,714 (1992)
  • 이건홍,유창모,홍은화,유재은,한종훈, 탄소나노튜브 합성방법 및 이에 이용되는 탄소나노튜브 합성장치, 중국, 01115547.7 (1992)
  • 이건홍,성주환, 겔 템플레이트를 이용한 전도성 고분자 막 제조 방법, 한국, 10-2001-0052950 (1992)
  • 정수환,황희영,양덕주,이건홍, 게이트홀 제조 방법 및 전계방출소자와 그 제조방법, 한국, 10-2000-0071341 (1992)
  • 이건홍,양덕주,황희영,정수환, 게이트홀 제조 방법 및 전계방출소자와 그 제조방법, 한국, 10-2000-0071341 (1992)
  • 이건홍,정수환,황희영,양덕주, 탄소 나노튜브 전계 방출 소자 및 그 제조 방법, 한국, 10-2000-0071340 (1992)
  • 이건홍,유창모,홍은화,염준호,김대호, 탄소 나노튜브의 기상 합성방법, 한국, 10-2000-0053277 (1992)
  • 이건홍,유창모,홍은화,유재은,한종훈, 탄소 나노튜브 합성방법 및 이에 이용되는 탄소 나노튜브 합성장치, 한국, 10-2000-0055829 (1992)
  • 이건홍,송현곤,황희영,성주환, 전기화학적 미세구조 측정 방법, 한국, 10-2000-0041909 (1992)
  • 이건홍,송현곤, 이산화탄소 고온 분리용 흡착제 및 그 제조방법, 한국, 10-1996-0000452 (1992)