교원프로필

김낙준 사진
교원에 대한 정보를 나타내는 표입니다.
성명 김낙준 (명예교수)
소속 철강대학원
전화번호
E-mail njkim@postech.ac.kr
Homepage

학력

  • 1978~1981 UNIV. OF CALIFORNIA AT BERKELEY (박사-합금설계,항공재료,전자현미경)
  • 1975~1977 서울대학교 (석사-금속공학)
  • 1971~1975 서울대학교 (학사-금속공학)

주요경력

  • 1995~2004 : Metals and Materials
  • 1995~1997 : 대한금속학회
  • 1993~2004 : Advanced Performance Materials
  • 1993~1998 : Intermetallics
  • 1991~2003 : 항공재료연구센터
  • 1991~1998 : Acta Metallurgica et Materialia
  • 1986~1988 : Allied-Signal Inc.
  • 1985~1985 : Allied Signal Ins.
  • 1982~1984 : University of Wyoming
  • 1981~1982 : Lawrence Berkeley Laboratory

전문분야

  • ALLOY DESIGN
  • RAPID SOLIDIFICATION/POWDER METALLURGY
  • ELECTRON MICROSCOPY/PHASE TRANSFORMATIONS

학술지

국제전문학술지

  • Dislocation binding as an origin for the improvement of room temperature ductility in Mg alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 715, 266-275 (2018)
  • Microstructure and mechanical properties of twin-roll cast Mg–6Zn–1Mn–1Al alloy joined by surface-friction welding, Materials Characterization, , 124, 8-13 (2017)
  • The microstructure of as-quenched 12Mn steel, Acta Materialia, , 125, 442-454 (2017)
  • Effect of Sn addition on the microstructure and deformation behavior of Mg-3Al alloy, Acta Materialia, , 124, 268-279 (2017)
  • Novel ultra-high-strength Cu-containing medium-Mn duplex lightweight steels, ACTA MATERIALIA, , 135, 215-225 (2017)
  • Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy, Nature Communications, , 8, - (2017)
  • Effect of stacking faults on the ductility of Fe-18Mn-1.5Al-0.6C twinning-induced plasticity steel at low temperatures, Scripta Materialia, , 137, 18-21 (2017)
  • Interpretation of quasi-static and dynamic tensile behavior by digital image correlation technique in TWinning Induced Plasticity (TWIP) and low-carbon steel sheets, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 693, 170-177 (2017)
  • Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel, Metallurgical and Materials Transactions A, , 684, 54-63 (2017)
  • {100} texture evolution in bcc Fe sheets - Computational design and experiments, ACTA MATERIALIA, , 106, 106-116 (2016)
  • Twinning-mediated formability in Mg alloys, SCIENTIFIC REPORTS, , 6, - (2016)
  • Effect of Mo on the High-Temperature Creep Resistance and Machinability of a Recycled Al-Alloy with High Iron Impurity, Journal of Materials Engineering and Performance, , 20, 4310-4316 (2016)
  • Al-TiH2 Composite Foams Magnesium Alloy, IOP Conference Series-Materials Science and Engineering, , 114, - (2016)
  • Cladding of Mg alloy with Zr based BMG Alloy, IOP Conference Series-Materials Science and Engineering, , 114, - (2016)
  • Microstructural Evolution in Fe-22Mn-0.4C Twinning-Induced Plasticity Steel During High Strain Rate Deformation, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 545-548 (2015)
  • Brittle intermetallic compound makes ultrastrong low-density steel with large ductility, NATURE, , 518, 77-79 (2015)
  • Effect of C content on the microstructure and tensile properties of lightweight ferritic Fe-8Al-5Mn-0.1Nb alloy, METALS AND MATERIALS INTERNATIONAL, , 21, 79-84 (2015)
  • Effect of Differential Speed Rolling on the Texture Evolution of Mg-4Zn-1Gd Alloy, METALS AND MATERIALS INTERNATIONAL, , 21, 490-497 (2015)
  • Improvement of Low Temperature Toughness of Ferritic Mn Steels by Alloy Modification, METALS AND MATERIALS INTERNATIONAL, , 21, 461-469 (2015)
  • Unique Appearance of Lamellar Cleavage Patterns on Fracture Surfaces of Ti-Based Amorphous Matrix Composite, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 2506-2515 (2015)
  • Interpretation of cryogenic-temperature Charpy impact toughness by microstructural evolution of dynamically compressed specimens in austenitic 0.4C-(22-26)Mn steels, ACTA MATERIALIA, , 87, 332-343 (2015)
  • Microstructural Evolution in Fe-22Mn-0.4C Twinning-Induced Plasticity Steel During High Strain Rate Deformation (vol 46, pg 545, 2015), METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 1825-1825 (2015)
  • Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels, ACTA MATERIALIA, , 100, 39-52 (2015)
  • Microstructural evolution and deformation behavior of twinning-induced plasticity (TWIP) steel during wire drawing, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 644, 41-52 (2015)
  • Effect of Reduction of Area on Microstructure and Mechanical Properties of Twinning-Induced Plasticity Steel During Wire Drawing, METALS AND MATERIALS INTERNATIONAL, , 21, 815-822 (2015)
  • Role of yttrium in activation of < c plus a > slip in magnesium: An atomistic approach, SCRIPTA MATERIALIA, , 108, 104-108 (2015)
  • Novel ultra-high-strength (ferrite plus austenite) duplex lightweight steels achieved by fine dislocation substructures (Taylor lattices), grain refinement, and partial recrystallization, ACTA MATERIALIA, , 96, 301-310 (2015)
  • Dynamic tension-compression asymmetry of martensitic transformation in austenitic Fe-(0.4,1.0)C-18Mn steels for cryogenic applications, ACTA MATERIALIA, , 96, 37-46 (2015)
  • Effect of Differential Speed Rolling on the Texture Evolution of Mg-4Zn-1Gd Alloy, METALS AND MATERIALS INTERNATIONAL, , 21, 490-497 (2015)
  • Comparison of static recrystallization behavior in hot rolled Mg-3Al-1Zn and Mg-3Zn-0.5Ca sheets, JOURNAL OF ALLOYS AND COMPOUNDS, , 589, 240-246 (2014)
  • Deformation behavior of ferrite-austenite duplex high nitrogen steel, METALS AND MATERIALS INTERNATIONAL, , 20, 35-39 (2014)
  • Effects of Mn Addition on Tensile and Charpy Impact Properties in Austenitic Fe-Mn-C-Al-Based Steels for Cryogenic Applications, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45A, 5419-5430 (2014)
  • Novel ferrite-austenite duplex lightweight steel with 77% ductility by transformation induced plasticity and twinning induced plasticity mechanisms, ACTA MATERIALIA, , 78, 181-189 (2014)
  • Effects of Nb and C additions on the microstructure and tensile properties of lightweight ferritic Fe-8Al-5Mn alloy, SCRIPTA MATERIALIA, , 89, 37-40 (2014)
  • High strength and formable Mg-6.2Zn-0.5Zr-0.2Ca alloy sheet processed by twin roll casting, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 609, 154-160 (2014)
  • Critical Assessment 6: Magnesium sheet alloys: viable alternatives to steels?, MATERIALS SCIENCE AND TECHNOLOGY, , 30, 1925-1928 (2014)
  • Current Issues in Magnesium Sheet Alloys: Where Do We Go from Here?, SCRIPTA MATERIALIA, , 84-85, 1-6 (2014)
  • Segregation in Twin-Roll Cast Mg Alloy and its Suppression through Alloy Design, MATERIALS LETTERS, , 132, 361-364 (2014)
  • Effect of Tempering Time on Microstructure, Tensile Properties, and Deformation Behavior of a Ferritic Light-Weight Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44A, 235-247 (2013)
  • Deformation behavior of duplex austenite and epsilon-martensite high-Mn steel, SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, , 14, 14204- (2013)
  • Fe-Al-Mn-C lightweight structural alloys: a review on the microstructures and mechanical properties, SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, , 14, 14205- (2013)
  • Effects of Inclusions on Delayed Fracture Properties of Three TWinning Induced Plasticity (TWIP) Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44, 776-786 (2013)
  • Manipulation of surface energy anisotropy in iron using surface segregation of phosphorus: An atomistic simulation, SCRIPTA MATERIALIA, , 68, 329-332 (2013)
  • Low-density steels, SCRIPTA MATERIALIA, , 68, 337-338 (2013)
  • Effect of annealing temperature on microstructural modification and tensile properties in 0.35 C-3.5 Mn-5.8 Al lightweight steel, ACTA MATERIALIA, , 61, 5050-5066 (2013)
  • Texture Evolution in Mg-Zn-Ca Alloy Sheets, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44A, 2950-2961 (2013)
  • Origin of intergranular fracture in martensitic 8Mn steel at cryogenic temperatures, SCRIPTA MATERIALIA, , 69, 420-423 (2013)
  • Twinning behavior of Mg-4Zn-1Gd alloy sheet during longitudinal tensile deformation, SCRIPTA MATERIALIA, , 69, 465-468 (2013)
  • Effects of Alloying Elements on High-Temperature Oxidation and Sticking Occurring During Hot Rolling of Modified Ferritic STS430J1L, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 74-86 (2012)
  • Deformation Behavior of Ferrite-Austenite Duplex Lightweight Fe-Mn-Al-C steel, SCRIPTA MATERIALIA, , 66, 519-522 (2012)
  • In-situ Neutron Diffraction Analysis on Deformation Behavior of Duplex High Mn Steel Containing Austenite and ε-martensite, METALS AND MATERIALS INTERNATIONAL, , 18, 751-755 (2012)
  • Effects of finish rolling temperature on inverse fracture occurring during drop weight tear test of API X80 pipeline steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 541, 181-189 (2012)
  • Effects of Annealing Temperature on Microstructure and Tensile Properties in Ferritic Lightweight Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 843-853 (2012)
  • Formation Mechanisms of Cracks Formed during Hot Rolling of Free-machining Steel Billets, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 882-892 (2012)
  • Effects of Aluminum Addition on Tensile and Cup Forming Properties of Three Twinning Induced Plasticity Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 1870-1883 (2012)
  • Nanoindentation Analysis for Local Properties of Ultrafine Grained Copper Processed by High Pressure Torsion, JOURNAL OF MATERIALS SCIENCE, , 47, 7828-7834 (2012)
  • Analysis and Estimation of Yield Strength of API X80 Linepipe Steel Pipe by Low-Cycle Fatigue Tests, METALS AND MATERIALS INTERNATIONAL, , 18, 597-606 (2012)
  • Atomistic modeling of an impurity element and a metal-impurity system: pure P and Fe-P system, JOURNAL OF PHYSICS-CONDENSED MATTER, , 24, 225002- (2012)
  • Effects of Processing Parameters on Microstructure and Properties of Ultra High Strength Linepipe Steel, MATERIALS SCIENCE AND TECHNOLOGY, , 28, 889-894 (2012)
  • Microstructures and tensile properties of a twin roll cast and heat-treated Mg-2.4Zn-0.1Ag-0.1Ca-0.1Zr alloy, SCRIPTA MATERIALIA, , 64, 335-338 (2011)
  • Cladding of Mg alloy with Al by twin-roll casting, SCRIPTA MATERIALIA, , 64, 836-839 (2011)
  • Effects of Al addition on deformation and fracture mechanisms in two high manganese TWIP steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 528, 2922-2928 (2011)
  • Correlation Study of Microstructure, Hardness, and Charpy Impact Properties in Heat Affected Zones of Three API X80 Linepipe Steels Containing Complex Oxides, METALS AND MATERIALS INTERNATIONAL, , 17, 29-40 (2011)
  • Effects of acicular ferrite on charpy impact properties in heat affected zones of oxide-containing API X80 linepipe steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 528, 3350-3357 (2011)
  • Effects of Rolling and Cooling Conditions on Microstructure and Tensile and Charpy Impact Properties of Ultra-Low-Carbon High-Strength Bainitic Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 42A, 1827-1835 (2011)
  • Realization of high tensile ductility in a bulk metallic glass composite by the utilization of deformation-induced martensitic transformation, SCRIPTA MATERIALIA, , 65, 304-307 (2011)
  • Cracking Phenomenon Occurring in Bi-S-Based Free-Machining Steel Wire Rods During Hot Rolling, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 42A, 3095-3105 (2011)
  • Effects of carbon equivalent and cooling rate on tensile and Charpy impact properties of high-strength bainitic steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 530, 530-538 (2011)
  • Effect of Carbon Content on Cracking Phenomenon Occurring during Cold Rolling of Three Light-Weight Steel Plates, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 42A, 138-146 (2011)
  • Effects of Specimen Thickness and Notch Shape on Fracture Modes in the Drop Weight Tear Test of API X70 and X80 Linepipe Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 42A, 2619-2632 (2011)
  • Microstructure and tensile properties of high-strength high-ductility Ti-based amorphous matrix composites containing ductile dendrites, ACTA MATERIALIA, , 59, 7277-7286 (2011)
  • Fracture Mechanisms of Cold-Rolled Light-Weight Steel Plates Containing Different Carbon Content, KOREAN JOURNAL OF METALS AND MATERIALS, , 48, 377-386 (2010)
  • Effects of Strain Rate and Test Temperature on Torsional Deformation Behavior of API X70 and X80 Linepipe Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 41A, 1961-1972 (2010)
  • Tensile and Charpy Impact Properties of High-Strength Bainitic Steels Fabricated by Controlled Rolling Process, KOREAN JOURNAL OF METALS AND MATERIALS, , 48, 615-624 (2010)
  • Microstructure and texture evolution of Mg alloys during twin-roll casting and subsequent hot rolling, SCRIPTA MATERIALIA, , 63, 716-720 (2010)
  • Effects of Specimen Thickness and Notch Shape on Fracture Mode Appearing in Drop Weight Tear Test (DWTT) Specimens of API X70 and X80 Linepipe Steels, KOREAN JOURNAL OF METALS AND MATERIALS, , 48, 705-716 (2010)
  • Effect of aging on the microstructure and deformation behavior of austenite base lightweight Fe-28Mn-9Al-0.8C steel, SCRIPTA MATERIALIA, , 63, 1028-1031 (2010)
  • Effects of Alloying Elements and the Cooling Condition on the Microstructure, Tensile Properties, and Charpy Impact Properties of High-Strength Bainitic Steels, KOREAN JOURNAL OF METALS AND MATERIALS, , 48, 798-806 (2010)
  • Charpy Impact Properties of Heat Affected Zones of API X80 Linepipe Steels Containing Complex Oxides, KOREAN JOURNAL OF METALS AND MATERIALS, , 48, 875-883 (2010)
  • Correlation of Microstructure and Cracking Phenomenon Occurring during Hot Rolling of Lightweight Steel Plates, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 41A, 138-148 (2010)
  • Effects of Cooling Conditions on Tensile and Charpy Impact Properties of API X80 Linepipe Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 41A, 329-340 (2010)
  • Effect of Ca Addition on Microstructure of Twin-Roll Cast AZ31 Mg Alloy, METALS AND MATERIALS INTERNATIONAL, , 15, 1-5 (2009)
  • Superplastic deformation behavior of twin-roll cast Mg-6Zn-1Mn-1Al alloy, SCRIPTA MATERIALIA, , 61, 223-226 (2009)
  • EFFECTS OF MO, CR, AND V ADDITIONS ON TENSILE AND CHARPY IMPACT PROPERTIES OF API X80 PIPELINE STEELS, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 40A, 1851-1862 (2009)
  • Relationship between stretch formability and work-hardening capacity of twin-roll cast Mg alloys at room temperature, SCRIPTA MATERIALIA, , 61, 768-771 (2009)
  • The Twin-Roll Casting of Magnesium Alloys, JOM, , 61, 14-18 (2009)
  • Atomistic Modeling of pure Mg and Mg–Al systems, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 33, 650-657 (2009)
  • Twin-Roll Cast Al-Clad Magnesium Alloy, MATERIALS SCIENCE FORUM, , 618-6, 467-470 (2009)
  • Room Temperature Formability of Mg Alloys, MATERIALS SCIENCE FORUM, , 618-6, 463-466 (2009)
  • Effect of microstructure on drop weight tear properties and inverse fracture occurring in hammer impacted region of high toughness X70 pipeline steels, MATERIALS SCIENCE AND TECHNOLOGY, , 24, 945-956 (2008)
  • Effects of critical plasma spray parameter and spray distance on wear resistance of Al2O3-8 wt.%TiO2 coatings plasma-sprayed with nanopowders, SURFACE & COATINGS TECHNOLOGY, , 202, 3625-3632 (2008)
  • Microstructure and tensile properties of hot-rolled Fe-C-Mn-Si-Cu multiphase steel, SCRIPTA MATERIALIA, , 59, 83-86 (2008)
  • Improvement of the plasticity of bulk amorphous alloys via a low-angle shear-deforming process, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 487, 400-404 (2008)
  • Microstructure and mechanical properties of powder-injection-molded products of Cu-based amorphous powders and Fe-based metamorphic powders, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 476, 69-77 (2008)
  • Microstructure and mechanical properties of two continuous-fiber-reinforced Zr-based amorphous alloy composites fabricated by liquid pressing process, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 39A, 763-771 (2008)
  • EFFECT OF SB AND SR ADDITIONS ON THE MICROSTRUCTURAL EVOLUTION OF MG-SN-AL-SI BASED ALLOYS, MATERIALS TRANSACTIONS, , 49, 936-940 (2008)
  • MECHANICAL PROPERTIES AND MICROSTRUCTURE OF TWIN-ROLL CAST MG-ZN-Y ALLOY, MATERIALS TRANSACTIONS, , 49, 980-985 (2008)
  • Transformation behavior and microstructural characteristics of acicular ferrite in linepipe steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 478, 361-370 (2008)
  • EFFECT OF CONSTITUENT PHASES ON THE MECHANICAL PROPERTIES OF BAINITE-BASE MULTIPHASE STEELS, NEW DEVELOPMENTS ON METALLURGY AND APPLICATIONS OF HIGH STRENGTH STEELS, BUENOS AIRES 2008 - PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON NEW DEVELOPMENTS ON METALLURGY AND APPLICATIONS OF HIGH STRE, , 2, 799-804 (2008)
  • Effect of Mo, Cr, and V on Tensile and Charpy Impact Properties of API X80 Linepipe Steels Rolled in Single Phase Region, JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, , 46, 788-799 (2008)
  • Application of metal injection molding process to fabrication of bulk parts of TiAl intermetallics, JOURNAL OF MATERIALS SCIENCE, , 42, 2048-2053 (2007)
  • MICROSTRUCTURE AND TENSILE PROPERTIES OF TWIN-ROLL CAST MG-ZN-MN-AL ALLOYS, SCRIPTA MATERIALIA, , 57, 793-796 (2007)
  • In situ fracture observation and fracture toughness analysis of Zr-based bulk amorphous alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 464, 261-268 (2007)
  • Design of high performance structural alloys using second phases, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 51-56 (2007)
  • DEFORMATION BEHAVIOR OF STRIP-CAST BULK AMORPHOUS MATRIX COMPOSITES CONTAINING VARIOUS CRYSTALLINE PARTICLES, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 176-180 (2007)
  • Effect of nano-particles on the creep resistance of Mg-Sn based alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 318-321 (2007)
  • Microstructural evolution in twin-roll strip cast Mg-Zn-Mn-Al alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 352-355 (2007)
  • Effect of alloying elements on the crystallization kinetics of Mg-Cu-(Y, Gd) bulk amorphous alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 489-492 (2007)
  • Corrosion behavior of the Mg65CU25Gd10 bulk amorphous alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 636-639 (2007)
  • Wear resistance and thermal conductivity of Zr-base amorphous alloy/metal surface composites fabricated by high-energy electron beam irradiation, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 937-940 (2007)
  • Estimation of glass forming ability of amorphous alloys based on the thermal analysis data during cooling, MATERIALS TRANSACTIONS, , 48, 1501-1504 (2007)
  • Applications of thermodynamic calculations to Mg alloy design: Mg-Sn based alloy development, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 98, 807-815 (2007)
  • Deformation behavior of a twin-roll-cast Mg-6Zn-0.5Mn-0.3Cu-0.02Zr alloy at intermediate temperatures, SCRIPTA MATERIALIA, , 56, 393-395 (2007)
  • Effects of molybdenum and vanadium addition on tensile and charpy impact properties of API X70 linepipe steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 38A, 1731-1742 (2007)
  • Twin-roll strip casting of iron-base amorphous alloys, MATERIALS TRANSACTIONS, , 48, 1584-1588 (2007)
  • Estimation of relative glass forming abilities of multicomponent alloy systems, MATERIALS TRANSACTIONS, , 48, 1671-1674 (2007)
  • Correlation of microstructure and charpy impact properties in API X70 and X80 line-pipe steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 458, 281-289 (2007)
  • ahermodynamic modeling of the Mg-Si-Sn system, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 31, 192-200 (2007)
  • Microstructure and mechanical properties of amorphous and metamorphic alloy products fabricated by powder injection molding, JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, , 45, 80-89 (2007)
  • Plasticity enhancement of bulk amorphous alloys via equal channel angular pressing, JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, , 45, 203-208 (2007)
  • Grain refining mechanism of Mg-Al base alloys by carbon addition, JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, , 45, 465-472 (2007)
  • EFFECT OF SECOND PHASE ON MECHANICAL PROPERTIES OF BAINITE-BASE STEELS, ADVANCED MATERIALS RESEARCH, , , 780-785 (2007)
  • FRICTION-STIR WELDING AND SURFACE-FRICTION WELDING OF TWIN-ROLL STRIP CAST ZMA611 MG ALLOY, ADVANCED MATERIALS RESEARCH, , 15, 333-338 (2007)
  • MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TWIN-ROLL STRIP CAST MG ALLOYS, MATERIALS SCIENCE FORUM, , 539, 119-126 (2007)
  • Solidification Behavior of Fe-base Amorphous Alloys during Twin-Roll Strip Casting, ADVANCED MATERIALS RESEARCH, , 15-17, 433-438 (2007)
  • SYNTHESIS OF ZR-BASED GLASSY ALLOY FOAMS, ADVANCED MATERIALS RESEARCH, , , 739-742 (2007)
  • Correlation of microstructure with hardness and corrosion resistance of surface alloyed materials fabricated with Fe-based metamorphic powders by accelerated electron beam irradiation method, MATERIALS SCIENCE FORUM, , 539, 1165-1170 (2007)
  • Effect of Alloying Elements on the Microstructural Evolution of Mg-Sn Based Cast Alloys, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, , 60, 245-250 (2007)
  • Microstructural Evolution in Twin-Roll Strip Cast Mg Alloys, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, , 60, 241-244 (2007)
  • Correlation of Microstructure with Hardness and Corrosion Resistance of Surface Alloyed Materials Fabricated with Fe-based metamorphic Powders by Accelerated Electron Beam Irradiation Method, MATERIALS SCIENCE FORUM, , , - (2007)
  • Microstructural development of adiabatic shear bands in ultra-fine-grained low-carbon steels fabricated by equal channel angular pressing, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 441, 308-320 (2006)
  • Dynamic deformation and fracture behaviors of two Zr-based amorphous alloys, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 37A, 2893-2897 (2006)
  • Correlation of crack-tip opening angle for stable crack propagation with charpy and drop-weight tear test properties in high-toughness API X70 pipeline steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 37A, 371-380 (2006)
  • Correlation of microstructure with hardness and wear resistance of stainless steel blend coatings fabricated by atmospheric plasma spraying, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 429, 189-195 (2006)
  • Relationship between yield ratio and the material constants of the swift equation, METALS AND MATERIALS INTERNATIONAL, , 12, 131-135 (2006)
  • CONSTITUTIVE ANALYSIS ON THE SUPERPLASTIC DEFORMATION OF WARM-ROLLED 6013 AL ALLOY, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 435, 687-692 (2006)
  • CONTINUOUS FABRICATION OF BULK AMORPHOUS ALLOY SHEETS BY TWIN-ROLL STRIP CASTING, INTERMETALLICS, , 14, 987-993 (2006)
  • Correlation of microstructure and wear resistance of Al2O3-TiO2 coatings plasma sprayed with nanopowders, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 37A, 1851-1861 (2006)
  • Microstructure and wear resistance of nanostructured Al2O3-8wt.%TiO2 coatings plasma-sprayed with nanopowders, SURFACE & COATINGS TECHNOLOGY, , 201, 1309-1315 (2006)
  • Hardness and wear resistance of Zr-based bulk metallic glass/Ti surface composites fabricated by high-energy electron beam irradiation, SURFACE & COATINGS TECHNOLOGY, , 201, 1620-1628 (2006)
  • Effective grain size and charpy impact properties of high-toughness X70 pipeline steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 36A, 2107-2114 (2005)
  • Effects of alloying elements on microstructure, hardness, and fracture toughness of centrifugally cast high-speed steel rolls, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 36A, 87-97 (2005)
  • Sheet fabrication of bulk amorphous alloys by twin-roll strip casting, SCRIPTA MATERIALIA, , 53, 693-697 (2005)
  • Effects of crystalline particles on mechanical properties of strip-cast Zr-base bulk amorphous alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 390, 427-436 (2005)
  • Effects of microstructure on inverse fracture occurring during drop-weight tear testing of high-toughness X70 pipeline steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 36A, 371-387 (2005)
  • Crystallisation kinetics of Zr(41.2)Ti(13.8)Cu(12.5)Ni(10)Be(22.5)BMG alloy during heating, PHILOSOPHICAL MAGAZINE, , 85, 139-152 (2005)
  • Kinetics of crystallization in continuously cooled BMG, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 404, 153-158 (2005)
  • Development of high performance alloy sheets by strip casting, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, , 58, 687-693 (2005)
  • Wear and thermal properties of Zr-based amorphous surface alloyed materials fabricated by high-energy electron beam irradiation, JOURNAL OF ALLOYS AND COMPOUNDS, , 400, 171-177 (2005)
  • Correlation of yield ratio with materials constants of constitutive equation, MATERIALS SCIENCE FORUM, , 475-4, 289-292 (2005)
  • Development of Mg alloy sheets via strip casting, MATERIALS SCIENCE FORUM, , 475-4, 457-462 (2005)
  • Development of creep resistant Mg alloys, MATERIALS SCIENCE FORUM, , 475-4, 521-524 (2005)
  • Effects of microstructure and environment on fatigue properties of investment cast Ti-6Al-4V alloy welds, MATERIALS SCIENCE FORUM, , 475-4, 595-598 (2005)
  • Correlation of microstructure and fracture properties of API X70 pipeline steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 36A, 725-739 (2005)
  • Correlation of rolling condition, microstructure, and low-temperature toughness of X70 pipeline steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 36A, 1793-1805 (2005)
  • Prediction of composition dependency of glass forming ability of Mg-Cu-Y alloys by thermodynamic approach, SCRIPTA MATERIALIA, , 52, 969-972 (2005)
  • Role of interface boundaries in the deformation behavior of TiAl polysynthetically twinned crystal: In situ transmission electron microscopy deformation study, JOURNAL OF MATERIALS RESEARCH, , 20, 1888-1901 (2005)
  • Development of strip casting process for fabrication of wrought Mg alloys, MATERIALS SCIENCE FORUM, , 488-4, 431-434 (2005)
  • Tensile and creep properties of magnesium alloys incorporating dispersoids within matrix, MATERIALS SCIENCE FORUM, , 488-4, 759-762 (2005)
  • Effects of alloying elements on mechanical properties of Mg-Al alloys, MATERIALS SCIENCE FORUM, , 488-4, 845-848 (2005)
  • Development of creep resistant die cast Mg-Sn-Al-Si alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 413, 555-560 (2005)
  • Fabrication of Zr- and Cu-base bulk metallic glass/Cu surface composites by high-energy electron-beam irradiation, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 408, 92-101 (2005)
  • Effect of strain on the crystallization kinetics of bulk amorphous alloys, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , 24-25, 691-694 (2005)
  • MODELING OF CRYSTALLIZATION KINETICS OF BULK AMORPHOUS ALLOYS DURING COOLING, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS SERIES, , 24-25, 327-330 (2005)
  • FABRICATION OF BULK AMORPHOUS ALLOY SHEETS BY STRIP CASTING, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS SERIES, , 24-25, 371-374 (2005)
  • Correlation of the microstructure and mechanical properties of oxide-dispersion-strengthened coppers fabricated by internal oxidation, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 35A, 493-502 (2004)
  • Formation of amorphous phase in melt-spun and injection-cast Cu60Zr30Ti10 alloys, SCRIPTA MATERIALIA, , 51, 221-224 (2004)
  • Effects of thickness on fatigue properties of investment cast Ti-6Al-4V alloy plates, JOURNAL OF MATERIALS SCIENCE, , 39, 587-591 (2004)
  • Analysis of abnormal fracture occurring during drop-weight tear test of high-toughness line-pipe steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 368, 18-27 (2004)
  • Correlation of microstructure with hardness and wear resistance in (TiC, SiC)/stainless steel surface composites fabricated by high-energy electron-beam irradiation, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 35A, 1029-1038 (2004)
  • Effect of Mg2Si particles on the elevated temperature tensile properties of squeeze-cast Mg-Al alloys, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 35A, 1629-1632 (2004)
  • Nucleation and growth of alpha phase in hot extruded Ti-46.6Al-2W-1.4W intermetallic alloy produced by hot extrusion of elemental powders, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 374, 160-169 (2004)
  • Microstructural investigation of nanocrystalline bulk Al-Mg alloy fabricated by cryomilling and extrusion, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 374, 211-216 (2004)
  • Compositional dependence of the deformation behaviour of ultrahigh-purity Ti-Al alloys, PHILOSOPHICAL MAGAZINE, , 84, 3001-3017 (2004)
  • Thermodynamic approach for predicting the glass forming ability of amorphous alloys, INTERMETALLICS, , 12, 1103-1107 (2004)
  • Mechanical property and fracture behavior of strip cast Zr-base BMG alloy containing crystalline phase, INTERMETALLICS, , 12, 1125-1131 (2004)
  • Two-layered Zr-base amorphous alloy-metal surface composites fabricated by high-energy electron-beam irradiation, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 35A, 3455-3460 (2004)
  • Strip casting of high performance structural alloys, JOURNAL OF RARE EARTHS, , 22, 78-84 (2004)
  • In-situ microfracture observation of strip-cast Zr-Ti-Cu-Ni-Be bulk metallic glass alloys, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 35A, 3753-3761 (2004)
  • Effect of tempering on hardness improvement in a VC/steel surface-alloyed material fabricated by high-energy electron-beam irradiation, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 346, 228-236 (2003)
  • Effects of HIPping on high-cycle fatigue properties of investment cast A356 aliuminium alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 340, 123-129 (2003)
  • Correlation of fatigue properties and microstructure in investment cast Ti-6Al-4V welds, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 340, 232-242 (2003)
  • Improvement of the oxidation resistance of EPM gamma-TiAl alloy by Y-addition, MATERIALS SCIENCE FORUM, , 426-4, 1807-1812 (2003)
  • Microstructure and mechanical properties of strip cast Al-Mg-Si-X alloys, MATERIALS TRANSACTIONS, , 44, 2617-2624 (2003)
  • Tensile and creep properties of squeeze cast Mg alloys with various second phases, MATERIALS SCIENCE FORUM, , 419-4, 419-424 (2003)
  • Fabrication of Mg alloy strips by strip casting, MATERIALS SCIENCE FORUM, , 419-4, 599-604 (2003)
  • The effect of yttrium addition on the oxidation resistance of EPM TiAl-based intermetallics, SCRIPTA MATERIALIA, , 48, 1655-1660 (2003)
  • Fabrication of multilayered titanium aluminide sheets by self-propagating high-temperature synthesis reaction using hot rolling and heat treatment, JOURNAL OF MATERIALS SCIENCE, , 38, 3647-3651 (2003)
  • Solidification modeling of bulk amorphous alloys, MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, , 806, 133-138   (2003)
  • TEM investigation on microstructural characteristics in nanostructured Al-Mg alloy, MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, , 791, 209-214 (2003)
  • Formation of crystalline phase in strip cast Zr-Ti-Cu-Ni-Be bulk amorphous alloy, METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, , 15-16, 43-48 (2003)
  • Microstructural analysis of multilayered titanium aluminide sheets fabricated by hot rolling and heat treatment, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 33, 3649-3659 (2002)
  • Microstructure and properties of strip cast AZ91 Mg alloy, METALS AND MATERIALS INTERNATIONAL, , 8, 551-554 (2002)
  • Effect of boron on the hot ductility of Nb-containing steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 33, 701-704 (2002)
  • The effect of the applied strain range on fatigue cracking in lamellar TiAl alloy, JOURNAL OF ALLOYS AND COMPOUNDS, , 335, 216-223 (2002)
  • Effect of microstructure on the yield ratio and low temperature toughness of linepipe steels, ISIJ INTERNATIONAL, , 42, 1571-1577 (2002)
  • Microstructural refinement and mechanical properties improvement of elemental powder metallurgy processed Ti-46.6Al-1.4Mn-2Mo alloy by carbon addition, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 32, 251-259 (2001)
  • Effects of microstructural evolution on superplastic deformation characteristics of a rapidly solidified Al-Li alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 32, 1649-1658 (2001)
  • Nano-structured bulk alloys of pig iron fabricated by warm processing, SCRIPTA MATERIALIA, , 44, 1635-1638 (2001)
  • Grain growth of nanocrystalline Ni powders prepared by cryomilling, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 32, 3109-3115 (2001)
  • High-cycle fatigue properties of investment cast Ti-6Al-4V alloy welds, JOURNAL OF MATERIALS SCIENCE LETTERS, , 20, 2183-2187 (2001)
  • Microstructural modification and hardness improvement in boride/Ti-6A1-4V surface-alloyed materials fabricated by high-energy electron beam irradiation, SCRIPTA MATERIALIA, , 45, 1-6 (2001)
  • Microstructural analysis of TiC reinforced ferrous surface composites processed by accelerated electron beam irradiation, CURRENT APPLIED PHYSICS, , 1, 467-471 (2001)
  • Microstructure and properties of titanium boride dispersed Cu alloys fabricated by spray forming, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 277, 274-283 (2000)
  • Investigation of primary and secondary creep deformation mechanism of TiAl, METALS AND MATERIALS-KOREA, , 6, 287-292 (2000)
  • Analysis and prevention of edge cracking phenomenon during hot rolling of non-oriented electrical steel sheets, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 264, 47-59 (1999)
  • Microstructural evolution during reactive spray forming of dispersion strengthened Cu alloy, METALS AND MATERIALS-KOREA, , 5, 141-147 (1999)
  • Modification of Mg2Si morphology in squeeze cast Mg-Al-Zn-Si alloys by Ca or P addition, SCRIPTA MATERIALIA, , 41, 333-340 (1999)
  • Characteristics of nanostructured TiO2 powders synthesized by combustion flame-chemical vapor condensation process, NANOSTRUCTURED MATERIALS, , 12, 637-640 (1999)
  • Tensile behavior of rapidly solidified Al-Li-Zr and Al-Li-Cu-Mg-Zr alloys at 293 and 77 K, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 30, 2254-2258 (1999)
  • Refinement of the lamellar structure in TiAl-based intermetallic compound by addition of carbon, SCRIPTA MATERIALIA, , 41, 1197-1203 (1999)
  • Effects of Ti-addition on the characteristics of wear resistant Al-Si-Fe base alloys processed via rapid solidification, METALS AND MATERIALS-KOREA, , 5, 593-596 (1999)
  • Densification behavior of PlMed TiAl parts, Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, , 46, 882-886 (1999)
  • Analysis and prevention of cracking phenomena during bending of cold-rolled 430 stainless steel, JOURNAL OF MATERIALS SCIENCE LETTERS, , 17, 573-576 (1998)
  • Effect of hot rolling conditions on the microstructure and mechanical properties of Fe-C-Mn-Si multiphase steels, SCRIPTA MATERIALIA, , 38, 763-768 (1998)
  • The influence of reinforced particle fracture on strengthening of spray formed Cu-TiB2 composite, SCRIPTA MATERIALIA, , 39, 1063-1069 (1998)
  • Identification of metastable phases in strip-cast and spray-cast Al-Fe-V-Si alloys, MATERIALS TRANSACTIONS JIM, , 39, 982-988 (1998)
  • Hardness improvement of TiB2/Ti surface-alloyed material fabricated by high-energy electron beam irradiation, SCRIPTA MATERIALIA, , 39, 1389-1394 (1998)
  • Superplastic deformation behavior of a rapidly solidified Al-Li alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 256, 208-213 (1998)
  • Strengthening mechanism of a spray-formed Cu-TiB2 composite, METALS AND MATERIALS-KOREA, , 4, 610-615 (1998)
  • Effect of B on the microstructure and mechanical properties of mechanically milled TiAl alloys, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 29, 2273-2283 (1998)
  • Special issue devoted to research at the Korea Institute of Machinery and Materials (KIMM) and the Center for Advanced Aerospace Materials (CAAM), ADVANCED PERFORMANCE MATERIALS, , 5, 263-264 (1998)
  • Recent research and development activities on Mg alloys at CAAM, ADVANCED PERFORMANCE MATERIALS, , 5, 319-329 (1998)
  • Dislocation evolution with creep strain and dislocation emission related with alpha(2)-phase dissolution, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 240, 457-463 (1997)
  • Effects of morphology and volume fraction of alpha(2) phase on the fatigue crack propagation of a Ti-24Al-11Nb alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 28, 2527-2536 (1997)
  • Microstructural characterization of 2124 Al-SiCW composite, SCRIPTA MATERIALIA, , 36, 1045-1051 (1997)
  • Control of beta phase in an EPM-processed intermetallic compound based on Ti-Al-Mn-Mo, SCRIPTA MATERIALIA, , 36, 1249-1254 (1997)
  • Tensile creep deformation and fracture behaviors of the lamellar TiAl alloy of elemental powder metallurgy, SCRIPTA MATERIALIA, , 36, 1295-1301 (1997)
  • Orientation dependence of microfracture behavior in a dual-phase high-strength low-alloy steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 28, 504-509 (1997)
  • Effects of temperature on the fatigue crack growth of an Al-Li 8090 alloy with delta' microstructure, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 28, 1089-1093 (1997)
  • Microstructural evolution during mechanical milling of pre-alloyed TiAl powders, INTERNATIONAL JOURNAL OF NON-EQUILIBRIUM PROCESSING, , 10, 25-33 (1997)
  • Interpretation of primary creep deformation mechanism through activation energy measurements, MATERIALS SCIENCE RESEARCH INTERNATIONAL, , 3, 166-170 (1997)
  • Structure and properties of rapidly solidified Mg-Al-Zn-Nd alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 226, 1030-1034 (1997)
  • The effect of tempering temperature on the high cycle fatigue properties of high strength spring steels, ADVANCES IN FRACTURE RESEARCH, VOLS 1-6, , , 1587-1594 (1997)
  • Correlation of microstructure and fracture toughness in high-chromium white iron hardfacing alloys, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 27, 3881-3891 (1996)
  • Microstructure and mechanical properties of rapidly solidified As-Si-Fe-X base alloys, MATERIALS & DESIGN, , 17, 255-259 (1996)
  • Origin of heterogeneous microstructure in mechanically alloyed NiAl, SCRIPTA MATERIALIA, , 34, 1231-1235 (1996)
  • Analysis and prevention of vertical cracking phenomena during deep drawing of hot-rolled SG295 steel strips, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 27, 1241-1250 (1996)
  • MICROSTRUCTURAL INFLUENCE ON THE INTRINSIC FATIGUE PROPERTIES OF AL-LI-8090 ALLOY, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 190, 99-108 (1995)
  • DEFORMATION AND FRACTURE-BEHAVIOR OF AN 8090-AL-LI ALLOY AT CRYOGENIC TEMPERATURE, SCRIPTA METALLURGICA ET MATERIALIA, , 32, 1255-1260 (1995)
  • IDENTIFICATION OF THE DISPERSOID IN A MG-AL-Y ALLOY, SCRIPTA METALLURGICA ET MATERIALIA, , 32, 1747-1752 (1995)
  • TEMPERATURE-DEPENDENCE OF THE OPTIMUM PARTICLE-SIZE FOR THE DISLOCATION DETACHMENT CONTROLLED CREEP OF AL-FE-V-SI/SICP COMPOSITE, SCRIPTA METALLURGICA ET MATERIALIA, , 32, 1813-1819 (1995)
  • POWDER-METALLURGY RESEARCH AT RIST AND POSTECH, KOREA, INTERNATIONAL JOURNAL OF POWDER METALLURGY, , 31, 105- (1995)
  • DISTRIBUTION OF DELTA-FERRITE CONTENT IN CONTINUOUSLY CAST TYPE-304-STAINLESS-STEEL SLABS, IRONMAKING & STEELMAKING, , 22, 316-325 (1995)
  • Microstructure and mechanical properties of duplex tiAl alloys containing Mn, METALS AND MATERIALS, , 1, 107-115 (1995)
  • Development of microstructure in mechanically alloyed NiAl, Materials Research Society Symposium - Proceedings, , 364, 585-590 (1995)
  • STRUCTURE AND DECOMPOSITION BEHAVIOR OF RAPIDLY SOLIDIFIED MG-ND-X (X-EQUIVALENT-TO-AL, SI) ALLOYS, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 179, 637-640 (1994)
  • TRANSMISSION ELECTRON-MICROSCOPY CHARACTERIZATION OF MECHANICALLY ALLOYED NIAL POWDER AND HOT-PRESSED PRODUCT, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 182, 1169-1173 (1994)
  • WHITHER GOETH ADVANCED LIGHTWEIGHT METALS, JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, , 46, 10-10 (1994)
  • EFFECT OF MICROSTRUCTURE ON THE TENSILE AND FRACTURE-BEHAVIOR OF CAST A356 AL/SICP COMPOSITE, SCRIPTA METALLURGICA ET MATERIALIA, , 31, 1629-1634 (1994)
  • LIMAT-93 - LIGHT MATERIALS FOR TRANSPORTATION SYSTEMS, JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, , 46, 44-47 (1994)
  • EVOLUTION OF MICROSTRUCTURE IN A RAPIDLY SOLIDIFIED AL-FE-V-SI ALLOY, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 189, 291-299 (1994)
  • INSITU OBSERVATION OF MICROFRACTURE PROCESSES IN AN 8090 AL-LI ALLOY PLATE, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 163, 11-21 (1993)
  • MORPHOLOGICAL EFFECT ON THE MECHANICAL-BEHAVIOR OF A 2-PHASE TI3AL-NB ALLOY, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 24, 1785-1793 (1993)
  • EFFECT OF T1 PRECIPITATE ON THE ANISOTROPY OF AL-LI ALLOY-2090, ACTA METALLURGICA ET MATERIALIA, , 41, 941-948 (1993)
  • FRACTURE MECHANISMS OF A 2124 ALUMINUM MATRIX COMPOSITE REINFORCED WITH SIC WHISKERS, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 23, 2589-2596 (1992)
  • STRUCTURE AND PROPERTIES OF RAPIDLY SOLIDIFIED AL-LI-CU-MG-ZR ALLOYS WITH A HIGH ZIRCONIUM CONTENT, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 158, 103-110 (1992)
  • MICROSTRUCTURE AND LOCAL BRITTLE ZONE PHENOMENA IN HIGH-STRENGTH LOW-ALLOY STEEL WELDS, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 22, 139-149 (1991)
  • ON THE EMBRITTLEMENT OF A RAPIDLY SOLIDIFIED AL-FE-V-SI ALLOY AFTER HIGH-TEMPERATURE EXPOSURE, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 22, 853-858 (1991)
  • CORRELATION OF MICROSTRUCTURE AND FRACTURE-TOUGHNESS OF A RAPID SOLIDIFICATION POWDER-METALLURGY AL-FE-V-SI ALLOY, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 147, 33-44 (1991)
  • INSITU FRACTURE OBSERVATIONS ON TEMPERED MARTENSITE EMBRITTLEMENT IN AN AISI 4340 STEEL, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 22, 1889-1892 (1991)
  • MICROSTRUCTURAL DEVELOPMENT IN A RAPIDLY SOLIDIFIED AL-FE-V-SI ALLOY, LIGHT-WEIGHT ALLOYS FOR AEROSPACE APPLICATIONS II, , 2, 219-229 (1991)
  • Analytical electron microscopy studies of silicide phase in a rapidly solidified Al-8.1Fe-1.8V-0.7Si alloy, INTERNATIONAL JOURNAL OF RAPID SOLIDIFICATION, , 6, 175-184 (1991)
  • IMPROVEMENT IN TOUGHNESS OF FE-CR-MN-C STEELS BY THERMAL-MECHANICAL TREATMENTS, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 21, 683-695 (1990)
  • EFFECT OF BORON ON THE STRUCTURE AND MECHANICAL-PROPERTIES OF INTERCRITICALLY ANNEALED FE-1.5MN-0.06C STEELS, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 129, 35-44 (1990)
  • HIGH-RESOLUTION TEM STUDY OF PRECIPITATES IN A RAPIDLY SOLIDIFIED AL-LI-ZR ALLOY, JOURNAL DE PHYSIQUE, , 48, 457-463 (1987)
  • STRUCTURE AND PROPERTIES OF RAPIDLY SOLIDIFIED ALUMINUM-LITHIUM ALLOYS, JOURNAL DE PHYSIQUE, , 48, 309-315 (1987)

국내전문학술지

  • 제어압연한 베이나이트계 고강도강의 인장 및 충격 성질, 대한금속재료학회지, , , 615-624 (2010)
  • 베이타이트게 고강도강의 합금원소와 냉각조건이 미세조직, 인장성질, 충격성질에 미치는 영향, 대한금속재료학회지, , 48, 798-806 (2010)
  • 복합산화물이 형성된 API X80 라인파이프강의 용접열영향부 샤르피 흡수에너지, 대한금속재료학회지, , 48, 875-883 (2010)
  • 탄소함량이 다른 경량철강판의 냉간 압연에 의한 파괴기구, 대한금속재료학회지, , 48, 377-386 (2010)
  • API X70 및 X80 라인파이프강의 DWTT 시편 파괴 형태에 미치는 시편 두께와 노치 형태의 영향, 대한금속재료학회지, , 48, 705-716 (2010)
  • 단상영역에서 압연된 API X80 라인파이프강의 인장 및 샤르피충격특성에 미치는 Mo, Cr, V의 영향, 대한금속재료학회지, , , - (2008)
  • 구속전단변형을 이용한 비정질 합금의 소성 향상, 대한금속·재료학회지, , 45, 203-208 (2007)
  • 분말사출성형으로 제조된 비정질 및 반비정질 합금 제품의 미세조직과 기계적 성질, 대한금속·재료학회지, , 45, 80-89 (2007)
  • 탄소첨가에 의한 Mg-Al계 마그네슘 합금의 결정립 미세화 기구, 대한금속·재료학회지, , 45, 465-472 (2007)
  • Zr계 벌크 비정질 합금의 파괴 인성 해석, 대한금속·재료학회지, , 44, 308-316 (2006)
  • 액상가압공정으로 제조된 금속계 연속섬유강화 Zr계 비정질 복합재료의 미세조직 및 기계적 특성, 대한금속·재료학회지, , 44, 794-800 (2006)
  • API X70 라인파이프강의 인장 및 샤르피 충격 특성에 미치는 Mo 및 V의 영향, 대한금속·재료학회지, , 44, 223-233 (2006)
  • API X70 및 X80급 라인파이프강의 샤르피충격특성에 미치는 미세조직의 영향, 대한금속·재료학회지, , 44, 1-9 (2006)
  • Zr계 비정질 합금과 비정질 복합재료의 준정적 및 동적 변형거동, 대한금속·재료학회지, , 43, 589-594 (2005)
  • 나노 분말을 이용하여 플라즈마 용사된 AL2O3-13 wt.%TiO2 코팅층의 미세조직과 내마모성, 대한금속·재료학회지, , 43, 433-442 (2005)
  • 나노분말을 이용하여 플라즈마 용사된 Al2O3-8 wt.%TiO2 코팅층의 마모특성, 대한금속·재료학회지, , 43, 793-800 (2005)
  • 대기 플라즈마 용사법으로 제조된 STS 316 혼합 코팅층의 미세조직과 내마모성, 대한금속·재료학회지, , 43, 374-381 (2005)
  • ECAP으로 제조된 초미세립 저탄소강의 단열성 전단밴드의 미세조직 변화, 대한금속·재료학회지, , 43, 363-373 (2005)
  • 고에너지 전자빔 투사방법으로 제조된 2층 비정질 합금 표면복합재료의 미세조직 연구, 대한금속·재료학회지, , 42, 725-731 (2004)
  • 고인성 라인파이프강의 인성과 천이온도의 분석 I. Charpy 충격특성과 유효결정립도, 대한금속·재료학회지, , 42, 691-700 (2004)
  • 고인성 라인파이프강의 인성과 천이온도의 분석 II. DWTT특성과 역파면 현상, 대한금속·재료학회지, , 42, 701-710 (2004)
  • 고인성 라인파이프강의 인성과 천이온도의 분석 III. Charpy 충격특성, DWTT, CTOA의 상관관계, 대한금속·재료학회지, , 42, 711-718 (2004)
  • 고인성 API X70 라인파이프강의 파괴특성 I. 압연조건-미세조직-저온인성의 상관관계, 대한금속·재료학회지, , 42, 225-237 (2004)
  • 고인성 API X70 라인파이프강의 파괴특성 II. 인성과 천이온도에 미치는 합금원소의 영향, 대한금속·재료학회지, , 42, 238-248 (2004)
  • 고인성 API X70 라인파이프강의 파괴특성 III. Drop-Weight Tear Test 시 발생되는 역파면에 대한 연구, 대한금속·재료학회지, , 42, 329-337 (2004)
  • 박판주조법으로 제조된 Zr계 벌크 비정질 합금의 미세파괴기구, 대한금속·재료학회지, , 42, 135-142 (2004)
  • 고인성 라인파이프강의 DROP-WEIGHT TEAR TEST 시 발생되는 비정상 파괴양상에 대한 연구, 대한금속·재료학회지, , 41, 279-287 (2003)
  • 고에너지 전자빔 투사방법으로 제조된 VC/탄소강 표면합금화 재료의 템퍼림에 의한 경도향상, 대한금속·재료학회지, , 40, 957-964 (2002)
  • 내부산화법으로 제조된 분산강화 CU-AL2O3 합금의 미세조직 및 기계적 성질, 대한금속·재료학회지, , 40, 1062-1070 (2002)
  • 박판주조법에 의해 제조한 AL-MG-SI-X 합금의 미세조직 연구, 대한금속·재료학회지, , 40, 141-147 (2002)
  • 연주크랙저감을 위한 API X-50 강의 고온연성에 대한 미세조직의 영향, 대한금속·재료학회지, , 40, 177-182 (2002)
  • 정밀주조된 A356 Al 합금의 미세조직과 기계적 성질에 미치는 HIPping 의 영향, 대한금속·재료학회지, , 40, 183-188 (2002)
  • 정밀주조된 TI-6AL-4V 합금 판재의 피로성질에 미치는 판재 두께의 영향, 대한금속·재료학회지, , 40, 730-736 (2002)
  • 고액공존 과공정 Al-Si-(X) 합금의 전자기적 교반시 응고현상, 대한금속·재료학회지, , 39, 1426-1434 (2001)
  • 정밀주조된 Ti-6Al-4V 합금 용접부의 피로성질, 대한금속·재료학회지, , 39, 1114-1123 (2001)
  • 용탕단조법으로 제조한 AISI 304 와이어 강화 AM60 MG 복합재의 특성 연구 (I) : 미세조직 및 기계적 성질, 대한금속학회지, , 38, 792-802 (2000)
  • 용탕단조법으로 제조한 AISI 304 와이어 강화 AM60 MG 복합재의 특성 연구 (II) : 와이어의 다중 네킹 현상 및 기구, 대한금속학회지, , 38, 803-810 (2000)
  • 초고순도 TIAL 금속간화합물의 미세조직 및 변형거동에 미치는 AL 조성의 영향, 대한금속학회지, , 38, 629-637 (2000)
  • RENE 95 초내열 합금 분말을 이용한 열간 정수압 성형 및 성형조건에 따른 미세조직 변화, 한국분말야금학회지, , 6, 152-162 (1999)
  • STRIP CASTING법으로 제조된 304 STAINLESS STEEL의 응고 미세조직, 대한금속학회지, , 37, 1204-1212 (1999)
  • TI-(43-54)AL-XMN-YNB(X=0,3,4, Y=0,4) 합금의 미세조직 및 변형거동(I)-미세조직 및 기계적 성질, 대한금속학회지, , 37, 1286-1294 (1999)
  • TI-(43-54)AL-XMN-YNB(X=0,3,4, Y=0,4) 합금의 미세조직 및 변형거동(II)-변형 및 미세파괴 거동, 대한금속학회지, , 37, 1295-1302 (1999)
  • 고강도 7075 AL 합금의 가공 열처리와 미세조직의 상관관계 연구, 대한금속학회지, , 37, 904-909 (1999)
  • 용탕단조법으로 제조한 TI 합금 강화 AM60 MG 복합재의 미세조직 및 파괴거동, 대한금속학회지, , 37, 958-965 (1999)
  • MELT-OVERFLOW법에 의해 제조한 AL-FE-V-SI합금의 미세조직 연구 (I) ; 응고과정, 대한금속학회지, , 36, 2027-2034 (1998)
  • MELT-OVERFLOW법에 의해 제조한 AL-FE-V-SI합금의 미세조직 연구 (II) ; 2차상 결정구조 및 상분해 거동, 대한금속학회지, , 36, 2035-2042 (1998)
  • PST-TIAL금속간화합물의 변형 및 파괴거동의 이방성-TEM 직접관찰, 대한금속학회지, , 36, 1362-1374 (1998)
  • SPRAY FORMING으로 제조된 CU-TIB2 합금의 미세조직과 상온 항복강도에 관한 연구, 대한금속학회지, , 36, 588-596 (1998)
  • TIB2/TI 표면합금화 재료의 제조 연구, 대한금속학회지, , 36, 2167-2172 (1998)
  • 고온자전합성법에 의한 TI/AL 복합판재의 미세조직 형성과정, 대한금속학회지, , 36, 1570-1576 (1998)
  • 기계적 분쇄화법으로 제조된 (TI52AL48)100-XBX(X=0, 0.5, 2, 5) 합금분말의 제조 및 미세조직 특성, 한국분말야금학회지, , 5, 98-110 (1998)
  • 기계적 분쇄화법으로 제조된 (TI52AL48)100-XBX(X=0, 0.5, 2, 5) 합금의 미세조직 및 기계적 성질, 대한금속학회지, , 36, 2091-2101 (1998)
  • 기계적 분쇄화법으로 제조된 (TI52AL48)95B5 합금의 미세조직 형성과정, 대한금속학회지, , 36, 1006-1015 (1998)
  • 기계적 합금화법으로 제조된 (TI52AL48)100-XBX 합금의 미세조직 형성과정, 대한금속학회지, , 36, 1899-2025 (1998)
  • 무방향성 전기강판의 열간압연시 발생하는 균열현상 연구, 대한금속학회지, , 36, 207-216 (1998)
  • 분말야금법에 의해 제조된 TI-46.6AL-2MO-1.4MN 금속간화합물의 미세조직 형성과정, 대한금속학회지, , 36, 1092-1101 (1998)
  • 용탕단조된 MG-AL-ZN-SI 합금의 미세조직 및 파괴거동, 대한금속학회지, , 36, 831-840 (1998)
  • FE-(12-17)%CR-(0.19-0.32)%C 스테인레스강으로 육성된 융접층의 미세조직과 기계적 특성에 미치는 C 및 CR 함량의 영향, 대한금속학회지, , 34, 1321-1331 (1996)
  • 고에너지 전자빔투사방법에 의한 TIN/탄소강 경사기능재료의 제조, 대한금속학회지, , 34, 1509-1517 (1996)
  • 원소분말압출법으로 제조된 TIAL-계 합금의 크리프성질, 대한금속학회지, , 34, 1299-1304 (1996)
  • CA, P의 첨가가 용탕단조 MG-AL-ZN-SI 합금의 미세조직에 미치는 영향, 대한금속학회지, , 34, 1558-1566 (1996)
  • TI3AL-NB 합금의 피로균열 전파에 미치는 Α2상의 영향, 대한금속학회지, , 33, 49-56 (1995)
  • 304 스테인레스강의 Δ-FERRITE 형성에 미치는 냉각속도의 영향, 대한금속학회지, , 33, 1144-1153 (1995)
  • 급냉응고/분말야금법으로 제조한 AL-FE-V-SI-TI-W 합금의 고온크맆 거동, 대한금속학회지, , 33, 1422-1430 (1995)
  • 열처리에 의한 급냉응고 MG-AL-ZN-ND 합금의 미세조직 변화, 대한금속학회지, , 33, 447-456 (1995)
  • 2상 조직강에서의 미세파괴기구 연구, 대한금속학회지, , 32, 469-478 (1994)
  • 8090 AL-LI 합금의 저온 미세파괴기구, 대한금속학회지, , 32, 1228-1237 (1994)
  • 고속도강 압연 ROLL의 미세조직 연구, 대한금속학회지, , 32, 280-289 (1994)
  • 조성변화에 따른 2상(Α2 + Γ) TIAL합금의 미세조직 및 기계적 성질의 변화, 대한금속학회지, , 32, 859-868 (1994)
  • DEEP DRAWING 용 열연강판의 균열현상 연구 : I. 결정립계 탄화물의 균열발생에 미치는 영향, 대한금속학회지, , 32, 649-657 (1994)
  • FE-10MN-9CR-8NI-5SI 합금의 형상기억효과 및 마르텐사이트 변태거동에 미치는 열기계적 반복처리의 영향, 대한금속학회지, , 31, 615-622 (1993)
  • SIC 연속섬유 강화 AL 복합재료의 파괴거동 연구, 대한금속학회지, , 30, 946-954 (1992)
  • TI3AL-NB 합금의 2상의 형상과 부피분율이 기계적 성질에 미치는 영향, 대한금속학회지, , 30, 1028-1036 (1992)
  • 8090 AL-LI 합금의 기계적 성질의 이방성 연구 (I) : 미세조직과 기계적 성질, 대한금속학회지, , 30, 417-423 (1992)
  • 8090 AL-LI 합금의 기계적 성질의 이방성 연구 (II) : 미세파괴기구, 대한금속학회지, , 30, 424-431 (1992)
  • 급냉응고 AL-FE-V-SI합금의 상변태, 대한금속학회지, , 30, 177-185 (1992)
  • 고장력강 용접부에서의 국부취화영역 연구 : I. 미세조직과 파괴특성에 관하여, 대한금속학회지, , 29, 535-544 (1991)
  • 고장력강 용접부에서의 국부취화영역 연구 : II. 파괴기구와 파괴모델에 관하여, 대한금속학회지, , 29, 545-553 (1991)
  • 급냉응고 AL-LI 합금의 초소성 변형 연구, 대한금속학회지, , 29, 1196-1202 (1991)
  • 급냉응고 AL-LI-X(ZR,CU,MG) 합금에서 첨가합금원소가 미세조직 및 기계적 성질에 미치는 영향, 대한금속학회지, , 29, 67-73 (1991)
  • 주조 A356.0 AL-SIC 복합재료의 기계적 성질과 파괴과정에 대한 공정 SI 입자의 영향, 대한금속학회지, , 29, 112-118 (1991)
  • 초고장력강에서의 템퍼드 마르텐사이트 취성파괴기구, 대한금속학회지, , 29, 119-125 (1991)
  • SIC 휘스커 보강 AL 복합재료의 미세조직과 기계적 특성에 관한 연구, 대한금속학회지, , 28, 640-647 (1990)
  • 급냉응고/분말야금법으로 제조된 AL-FE-V-SI 합금의 기계적 성질 : I. 미세조직과 기계적 성질에 관한 연구, 대한금속학회지, , 28, 350-359 (1990)
  • 급냉응고/분말야금법으로 제조된 AL-FE-V-SI합금의 기계적 성질 : II.파괴기구에 관한 연구, 대한금속학회지, , 28, 360-366 (1990)

일반학술지

  • Improvement of impact toughness of 5Mn-1Al-0.5Ti steel by intercritical annealing, Metals and Materials International, , 23, 283-289 (2017)
  • Fabrication of Bulk Amorphous Alloy Sheets by Strip Casting, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , 24, 371-374 (2005)
  • Modeling of Crystallization Kinetics of Bulk Amorphous Alloys during Cooling, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , 0, 327-330 (2005)
  • Formation of Crystalline Phase in Strip Cast Zr-Ti-Cu-Ni-Be Bulk Amorphous Alloy, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , , 43-48 (2003)
  • Microstructural Evolution in Al/AlN Composites Processed by Mechanical Alloying, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , , 457-462 (2003)
  • On the Undercooling of Aluminum Powders Produced by Uniform Droplet Spray (UDS) Process, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , , 433-438 (2003)
  • ON THE UNDERCOOLING OF ALUMINUM POWDERS PRODUCED BY THE UNIFORM DROPLET SPRAY (UDS) PROCESS, "METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS", , , 433-438 (2003)
  • MICROSTRUCTURAL EVOLUTION IN AL/ALN COMPOSITES PROCESSED BY MECHANICAL ALLOYING, METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, , , 457-462 (2003)
  • A New Suggestion of Creep Deformation Mechanism of TiAl, CREEP BEHAVIOR OF ADVANCED MATERIALS FOR 21ST CENTURY, , 41, 1197-1203 (1999)
  • DISPERSION STRENGTHENED CU ALLOYS FABRICATED IN-SITU BY SPRAY FORMING, SPRAY FORMING, , 4, 7-20 (1999)
  • Microsturcture Evolution during Mechanical Milling of Pre-Alloyed TiAl Powders, INTERNATIONAL JOURNAL OF NON-EQUIULIBRIUM PROCESSING, , 10, 25-33 (1997)
  • MICROSTRUCTURE AND MECHANICAL PROPERTIES OF RAPIDLY SOLDIFIED AL-FE BASED ALLOYS, Acta Metallurgica Sinica Series A, Physical Metallurgy & Materials Science, , 9, 549-554 (1996)
  • Microstructure and mechanical properties of rapidly solidified Al-Si-Fe-X base alloys, MATERIALS AND DESIGN, , 17, 255-259 (1996)
  • TEM CHARCTERIZATION OF MECHANICALLY ALLOYED NIAL POWDER AND HOT PROSSED PRODUCT, MATERIALS SCIENCE & ENGINEERING. A, STRUCTURAL MATERIALS : PROPERTIES, MICROSTRUCTURE AND PROCESSING , , 181, 1169-1173 (1994)
  • Conference Review, LiMAT-93: Light Materials for Transportation Systems, JOM-J MIN MET MAT S - 직접입력, , 46, 44-49 (1994)
  • Effect of Morphology on the Mechanical Behavior of a Two Phase Ti3Al-Nb Alloy, , , 0, 1785- (1993)
  • Structure and Properties of High Zr Containing Rapidly Solidified Al-Li Alloys, MATERIALS SCIENCE & ENGINEERING. A, STRUCTURAL MATERIALS : PROPERTIES, MICROSTRUCTURE AND PROCESSING , , 158, 103-110 (1992)
  • Correlation of Microstructure and Fracture Toughness of an RS/PM Al-Fe-V-Si Alloy, MATERIALS SCIENCE & ENGINEERING. A, STRUCTURAL MATERIALS : PROPERTIES, MICROSTRUCTURE AND PROCESSING , , 147, 33-44 (1991)
  • 고온 구조용 재료금속간 화합물, 대한금속학회 회보, , 3, 151-158 (1990)
  • 신분말 야금기술과 우주항공재료개발, 대한금속학회 회보, , 3, 35-47 (1990)
  • Mechanical Behavior of RSP Al-Li-Zr Alloy at 293 and 77K, PROCEEDINGS OF ALUMINUM-LITHIUM V, , 0, - (1989)
  • STABILITY OF QUASICRYSTALLINE PHASE IN RAPIDLY SOLIDIFIED AL-FE-V ALLOYS, MATERIALS SCIENCE & ENGINEERING. A, STRUCTURAL MATERIALS : PROPERTIES, MICROSTRUCTURE AND PROCESSING , , 99, 407-410 (1988)
  • High Resolution TEM Study of Precipitates in Rapidly Solidified Al-Li Alloys, JOURNAL DE PHYSIQUE, , 48, 457-460 (1987)
  • HIGH-PERFORMANCE LIGHT-WEIGHT ALLOYS BY RAPID SOLIDIFICATION PROCESSING, MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS, , 80, 213-224 (1987)
  • Rapidly Solidified Aluminum Alloys Prepared from Melt Spun Ribbons, PROCESSING OF STRUCTURAL METALS BY RAPID SOLIDIFICATION, , 0, - (1987)
  • Structure and Properties of Rapidly Solidified Al-Li Alloys, JOURNAL DE PHYSIQUE, , 48, 309-312 (1987)

학술회의논문

  • Room Temperature Formability of Mg Alloys, MATERIALS SCIENCE FORUM, 0, 0, - (2009)
  • Analysis of Fracture Toughness in Transition Temperature Region of an API X70 Linepipe Steel, The Joint International Conference of HSLA Steels 2005 and ISUGS 2005, 0, 0, 373-378 (2005)
  • Joining of twin-roll strip cast Mg alloys by friction stir welding and surface friction welding, 1st Asian Symposium on Magnesium Alloys, 0, 0, 301-304 (2005)
  • Microstructure and Creep Properties of Cast Mg-Sn Based Alloys, 1st Asian Symposium on Magnesium Alloys, 0, 0, 199-202 (2005)
  • 나노 분말을 이용하여 플라즈마 용사된 Al2O3-TiO2 코팅층의 마모성질, 19회 재료강도 심포지엄, 0, 0, 41-50 (2005)
  • ECAP으로 제조된 초미세립 저탄소강의 단열성 전단밴드 형성 거동, 19회 재료강도 심포지엄, 0, 0, 217-226 (2005)
  • Zr계 비정질 합금 및 복합재료의 준정적 및 동적 변형 및 파괴거동, 19회 재료강도 심포지엄, 0, 0, 75-86 (2005)
  • 고에너지 전자빔 투사방법으로 제조된 Zr-계 비정질 합금 표면복합재료의 미세조직과 기계적 성질, 18회 재료강도 심포지엄, 0, 0, 27-33 (2004)
  • API X70 라인파이프강의 저온인성과 천이온도 분석 연구, 18회 재료강도 심포지엄, 0, 0, 181-188 (2004)
  • Development of Wrought Mg Alloys via Strip Casting, Magnesium Technology 2004 [TMS 2004], 0, 0, 107-112 (2004)
  • 박판주조법으로 제조된 Zr계 벌크 비정질 합금의 미세파괴과정 관찰, 제17회 재료강도 심포지엄, 0, 0, 50-58 (2003)
  • API X70 라인파이프강의 저온파괴특성, 제17회 재료강도 심포지엄, 0, 0, 40-49 (2003)
  • Analysis of Inverse Fracture Occuring in Hammer-impacted Region during Drop-weight Tear Test of a High-Toughness Linepipe Steel, Proceedings of The Thirteenth International Society of Offshore and Polar Engineering Conference, 0, 0, 129-134 (2003)
  • Strip Cast Mg Alloys: Structure & Mechanical Properties, Light Metal Technology Conference 2003, 0, 0, - (2003)
  • Effect of Microstructure on the Yield Ratio and Low Temperature Toughness of API Steel, in First International Conference on Advanced Structural Steels, 0, 0, 237-238 (2002)
  • 고에너지 전자빔투사방법으로 제조된 VC/탄소강 표면합금화 재료의 템퍼링 효과, 제 16회 재료강도 심포지움, 0, 0, 221-228 (2002)
  • Effect of second Phase on High Temperature Properties of Squeeze Cast Mg-Al-X Alloys, Mg Technology 2002 (TMS), 0, 0, 77-82 (2002)
  • 정밀주조된 Ti-6Al-4V 합금 용접부의 미세조직이 피로전파거동에 미치는 영향, 제15회 재료강도 심포지엄, 0, 0, 263-270 (2001)
  • API 강재의 항복비와 가공경화지수의 상관관계, 제15회 재료강도 심포지엄, 0, 0, 177-186 (2001)
  • 극저탄소 베이나이트강의 강도와 저온인성에 미치는 미세조직의 영향, 대한금속재료학회 추계학술대회, 0, 0, - (2001)
  • 냉간압연 판재의 기계적 특성에 관한 2차 압하율의 영향, 대한금속재료학회 추계학술대회, 0, 0, - (2001)
  • Strip casting of Mg Alloys, The Second International Conference on Light Materials for Transportation Systems(LiMAT-2001) Busan, 0, 0, 225-232 (2001)
  • 박판주조법으로 제조된 AZ91 마그네슘합금의 미세조직 형성과정, 대한금속재료학회 춘계학술대회, 0, 0, - (2001)
  • 연주크랙저감을 위한 API X-50강의 고온연성에 대한 B의 영향, 대한금속재료학회 춘계학술대회, 0, 0, - (2001)
  • Al 주조합금A357의Mg, Be 함량에 따른 석출거동 및 기계적 성질에 관한 연구, 대한금속재료학회 춘계학술대회, 0, 0, - (2001)
  • 정밀주조 Ti-6Al-4V 합금 용접부의 피로파괴특성, 제 2차 재료 및 파괴부문 학술대회, 0, 0, 39-44 (2001)
  • Combustion Synthesis of Mechanically Alloyed Mo and Si Powders, International Conference on Trends in Mechanical Alloying : Science, Technology & Applications (TMA, 0, 0, - (2001)
  • Effect of Mn addition on Microstructure and Mechanical Properties of Strip Cast Al6061 Alloy, The Second International Conference on Light Materials for Transportation Systems(LiMAT-2001) Busan, 0, 0, 553-558 (2001)
  • Growth Kinetics of Primary Al Nanocrystals in Al-Ni-Nd Alloy, The Second International Conference on Light Materials for Transportation Systems(LiMAT-2001) Busan, 0, 0, 529-534 (2001)
  • Improvement of Hot Ductility of Nb Containing Steel by Alloy Modification, The 2nd KOREA-CHINA JOINT SYMPOSIUM ON ADVANCED STEELTECHNOLOGY, 0, 0, 160-166 (2001)
  • 박판주조법에 의해 제조한 Al-Fe-Mn-Si-Cu-Mg-Ag 합금의 미세조직 특성, 대한재료금속학회 추계학술대회, 0, 0, - (2000)
  • Development of Strip Cast Al Alloys, The 3rd International Symposium on the Advanced Functional Materials in the North-East Region, 0, 0, - (2000)
  • EB와 TIG 용접된 주조 Ti-6Al-4V 합금의 피로성질, 대한재료금속학회 추계학술대회, 0, 0, - (2000)
  • Nb-V-Ti 첨가 열연 고장력의 열간가공조건이 기계적 특성에 미치는 영향, 대한재료금속학회 추계학술대회, 0, 0, - (2000)
  • Fatigue Behavior of EB and TIG Welded Cast Ti-6Al-4V Alloy, 11th Annual Advanced Aerospace Materials & Processes (AEROMAT 2000), 0, 0, - (2000)
  • Growth Kinetics of Primary Al Nanocrystals in Al-Ni-Nd Alloy, Joint Australia-Korea Workshop on Light Alloys, Nack J. Kim (ed.), CAAM, 0, 0, - (2000)
  • Solidification of Mg2Si morphology in Squeeze Cast Mg Alloys, Joint Australia-Korea Workshop on Light Alloys, Nack J. Kim (ed.), CAAM, 0, 0, - (2000)
  • 분무성형 및 반응분무성형법으로 제조된 분산강화 동합금의 항복강도에 미치는 분산상의 영향, 압출 및 인발 심포지엄, 0, 0, 38-46 (1999)
  • A New Suggestion of Creep Deformation Mechanism of TiAl, Creep Behavior of Advanced Materials for the 21st Century, 0, 0, 227-236 (1999)
  • Ti합금 강화 마그네슘 복합재의 미세조직 및 파괴거동, 춘계학술대회, 0, 0, 109-109 (1999)
  • RS/PM법으로 제조된 Mg-Li-Al-Si 합금의 미세조직과 기계적 성질, 추계학술대회, 0, 0, 218-218 (1998)
  • 50kg급 열연강판의 고온연성에 대한 Ti첨가의 영향, 추계학술대회, 0, 0, 228-228 (1998)
  • 반응분무성형법으로 제조한 분산강화 동합금의 미세조직 및 기계적 성질 연구, 추계학술대회, 0, 0, 59-59 (1998)
  • Meltspinning으로 제조된 ZrAlCuNi합금 리본의 정질에서 비정질로의 전이에 관한 연구, 추계학술대회, 0, 0, 312-312 (1998)
  • MIM법으로 제조된 TiAl금속간화합물의 소결에 미치는 공정변수의 영향, 추계학술대회, 0, 0, 328-328 (1998)
  • Microstructure and Yield Strength of Cu-TiB2 Alloy Produced by Spray Forming, PRICM-3, 0, 0, 1719-1724 (1998)
  • 가속전자빔투사로 제조된 TiB2/Ti 표면합금화 재료의 고온특성, 재료강도심포지움, 0, 0, 375-382 (1998)
  • Densification Behavior of PIMed TiAl Parts, Japan-Korea PIM Workshop, 0, 0, 178- (1998)
  • Fe-C-Mn-Si-X 계 변태유기소성 복합조직강의 잔류 오스테나이트 변형 거동, 재료 재료강도 심포지엄 및 가스터빈재료 워크숍, 0, 0, 115-123 (1998)
  • Microstructural Evolution during Reactive Spray Forming of Dispersion Strengthened Cu Alloy, ISAPM98, 0, 0, 24-26 (1998)
  • Strengthening Mechanism of a Spray Formed Cu-TiB2 Composite, AEPA98, 0, 0, 21-25 (1998)
  • TiAl 합금에서 prestrain에 의한 primary 크리프 영역에서의 변형 기구 변화, 재료강도심포지움, 0, 0, 367-373 (1998)
  • 무방향성 전기강판의 열간시 발생하는 Edge균열현상 연구, 추계학술대회, 0, 0, 237-237 (1997)
  • 열간압연된 Ti-Al 다층판에서 금속간 화합물상들의 생성 및 성장거동, 추계학술대회, 0, 0, 229-229 (1997)
  • Mg2Si 형상이 용탕단조된 Mg-Al-Zn-Si 합금의 파괴거동에 미치는 영향, 재료강도심포지엄, 0, 0, 173-183 (1997)
  • Effect of B on the Microsturcture and Mechanical Properties of Mechanically Alloyed TiAl Alloys, Symp. Proc. Mechanical Behavior of Bulk Nano-Materials, 0, 0, - (1997)
  • Microstructure and Mechanical Properties of Hot-Rolled Fe-C-Mn-Si-X Multiphase Steels, Proc. of THERMEC '97, Inter. Conf. on Thermomechanical Processing of Steel & Other Materials - 직접, 0, 0, 765-768 (1997)
  • 육성용접한 고크롬 철계합금의 마모기구, 추계학술대회 발표개요집, 0, 0, - (1997)
  • Solidification Microstructure of Al-Fe-V-Si Alloys, Proc. of The Asian Science Seminar on New Direction in Transmission Electron Microscopy and Nano-cha, 0, 0, - (1997)
  • Competetion between Metastable and Stable Phases During Solidification of Al-Fe-V-Si Alloys, Symp. Proc. Light Weight Alloys of Aerospace Applications IV, 0, 0, 19-30 (1997)
  • Effect of Alloying Elements on the Microstructure and Mechanical Properties of Squeeze Cast Mg-Al-Zn-X Alloys, Symp. Proc. Light Weight Alloys of Aerospace Applications IV, 0, 0, 129-138 (1997)
  • Investigation of the Creep Deformation of the Lamellar TiAl Alloy Made by Hot Extrusion of a Blended Elemental Powder Mixtures, Light Weight Alloys for Aerospace Applications III, 0, 0, - (1997)
  • The Effect of Tempering Temperature on the High Cycle Fatigue Properties of High Strength Spring Steels, Proc. of 9th Inter. Conf. on Fracture, 0, 0, 1587-1594 (1997)
  • Fe-C-Mn-Si-X계 변태유기소성을 응용한 복합조직강의 미세조직과 기계적 성질, 상변태심포지엄, 0, 0, 157- (1996)
  • Microstructure Control in Aluminum Alloy, 2th ISAPM, 0, 0, - (1996)
  • 가속전자빔 투사방법으로 제조된 TiN 경사기능재료의 미세조직, 재료강도심포지엄, 0, 0, 473- (1996)
  • 원소분말압출법으로 제조된 TiAl합금의 primary 크리프 거동, 재료강도심포지엄, 0, 0, 385- (1996)
  • Effects of Hot Rolling Conditions on the Microstructure and Tensile Properties of Nb-Bearing TRIP Steels, Proc. of the International Symposium on Hot Workability and Light Alloys Composites, 0, 0, 493- (1996)
  • 급냉응고 Mg-Al-Zn-Nd합금의 미세조직 및 상분해 거동, 재료물성심포지엄, 0, 0, 357- (1996)
  • Fabrication of Ti-Al Intermetallic Sheets via Hot Rolling of Ti and Al Multilayer Foils, 125th Annual Meeting, 0, 0, - (1996)
  • Compositional Effect on the Structure and Properties of (α2 +v) Two-Phase TiAl Alloys, Gamma Titanium Aluminides, 0, 0, 779-786 (1995)
  • Deformation and Fracture Behavior of PST Crystals of TiAI - TEM In-Situ Observation, Gamma Titanium Aluminides, 0, 0, 315-322 (1995)
  • In-Situ Observation of' Cryogenic Microfracture Mechanism of an Al-Li Alloy, Light Weight Alloys for Aerospace Applications ILl, 0, 0, 119-127 (1995)
  • Microstructure and Mechanical Properties of Mechanically Alloyed TiAl Based Alloys, Gamma Titanium Aluminides, 0, 0, 811-818 (1995)
  • Structure and Decomposition Behavior of Rapidly Solidified Mg-AI-Zn-Nd, Light Weight Alloys for Aerospace Applications 111, 0, 0, 435-447 (1995)
  • Microstructure and Mechanical Properties of Spray Cast SiCp/Al-Fe-V-Si Composite, High Performance Metal and Ceramic Matrix Composites, 0, 0, 137-144 (1994)
  • Stress-Strain Behavior of Various Phases in a Ti3Al-Nb Alloy, Advanced Materials - New Processes and Reliability, 0, 0, 1519-1523 (1994)
  • Anisotropic Mechanical Properties in an 8090 Al-Li Alloy, Al-Li, 6th International Al-Li Cinference, 0, 0, 339-344 (1993)
  • Deformation and Fracture Behavior of Ti3Al, Advanced Materials - New Processes and Reliability, 0, 0, 1487-1494 (1993)
  • Effect of Microstructure on the Anisotropic Fatigue Behavior of Al-Li 8090 Alloy, Light Materials for Transportation systems, 0, 0, 171-179 (1993)
  • Microstructural Characterization of Y Containing Mg-Al Alloy, Light Materials for Transportation Systems, 0, 0, 575-581 (1993)
  • Microstructure and Mechannical Properties of Squeeze Cast Mg Composites Reinforced with Alumino-silicate Short Fibers, ICCM-9, 0, 0, 247-254 (1993)
  • Effect of Matrix Constituent Phases on the Fracture Behavior of 2124 Al-SiCw Composites, Light Weight Alloys for Aerospace Applications II, 0, 0, 413-419 (1991)
  • Fracture Behavior of Ti3Al-Nb Alloy, Light Weight Alloys for Aerospace Applications II, 0, 0, 467-476 (1991)
  • Physical Metallurgy of Rapidly Solidified Al-Li Alloys, Science and Engineering of Light Metals, 0, 0, 691-696 (1991)
  • Microstructural Effects on Anisotropy of 2090 Al-Li Alloy, Proceedings of Aluminum-Lithium V, 0, 0, - (1989)
  • Microstructure and Mechanical Properties of Rapidly Solidified Al-Li-Cu-Mg-Zr Alloy Die Forgings, Proceedings of Aluminum-Lithium V, 0, 0, - (1989)
  • Superplastic Behavior of a Rapidly Solidified Al-Li-Cu-Mg-Zr Alloy, Proceedings of Aluminum-Lithium V, 0, 0, - (1989)
  • Advanced Magnesium Alloys for Aerospace Application, Space Age Metals Technology, 0, 0, - (1988)
  • Recent Development in Rapidly Solidified Al-Li Alloys, Aluminum-Lithium Alloys, 0, 0, - (1988)
  • Development of Low Sensity Al-Li Alloys Using Rapid Solidification Technology, Aluminum-Lithium Alloys Ⅲ, 0, 0, - (1986)
  • Plastic Deformation of a Rapidly Solifified Al-Li-Zr Alloy, Rapidly Solidified Alloys and Their Mechanical and Magnetic Properties, 0, 0, - (1986)
  • Rapidly Solidly Al-Li Alloys: Structure and Properties, Aluminum Alloys-Physical and Mechanical Properties, 0, 0, - (1986)
  • Evolution of Multiphase Structures and Their Influence on Mechanical Properties of Low Carbon Steels, HSLA Steels, Technology and Applications, 0, 0, - (1984)
  • Dual Phase Steels for Pipelines, Steels for Line Pipe and Pipeline Fittings, 0, 0, - (1983)
  • Thermodynamic modeling of the Mg-Sn-Zn-Al system and its application to Mg alloy design, TMS2006, 0, 0, 457-461 (0000)
  • Effect of Constituent Phase on Toughness of Bainite-base HSLA Steels, ICASS 2006, 0, 0, 293-297 (0000)
  • 박판주조법으로 제조된 Mg합금의 고온변형거동과 인장특성, 20회 재료강도 심포지엄, 0, 0, 409-415 (0000)
  • Mg-Sn-Al-Si계 마그네슘 합금의 인장특성에 미치는 합금원소 첨가의 영향, 20회 재료강도 심포지엄, 0, 0, 377-384 (0000)
  • Effects of Specimen Thickness and Notch Shape on Drop Weight Tear Test and Charpy Impact Test Properties of API X70 and X80 Line-Pipe Steels, TMS2007, 0, 0, 19-29 (0000)
  • Superplastic Behavior of Twin-Roll Strip Cast Mg Alloy, TMS2007, 0, 0, 89-93 (0000)
  • 액상가압공정으로 제조된 스테인리스강 연속 섬유강화 Zr계 비정질 복합재료의 기계적 성질, 21회 재료강도 심포지엄, 0, 0, 7-14 (0000)

학회발표

  • Si를 첨가한 페라이트 경량 철강의 미세조직 및 기계적 물성 변화 , Si를 첨가한 페라이트 경량 철강의 미세조직 및 기계적 물성 변화, 0, 0, - (2017)
  • Cu 첨가 Duplex 경량 철강의 강화 기구 , Cu 첨가 Duplex 경량 철강의 강화 기구, 0, 0, - (2017)
  • Cu첨가 Duplex 경량철강의 강화 기구 , 제 31회 첨단구조재료 심포지엄, 0, 0, - (2017)
  • Effect of Microstructure on Brittle Crack Arrest Behavior of a Heavy-gauge Steel Plate, Effect of Microstructure on Brittle Crack Arrest Behavior of a Heavy-gauge Steel Plate, 0, 0, - (2017)
  • Extended Hall-Petch Relationships for Yield, Cleavage and Intergranular Fracture Strengths of Bcc steel and Its Deformation and Fracture Behaviors , Extended Hall-Petch Relationships for Yield, Cleavage and Intergranular Fracture Strengths of Bcc steel and Its Deformation and Fracture Behaviors, 0, 0, - (2017)
  • Effect of Mn-segragation on Tensile Properties of Austenitic High Strength Steel , Effect of Mn-segragation on Tensile Properties of Austenitic High Strength Steel, 0, 0, - (2017)
  • Austenite계 경량철강의 k-carbide 형상 변화 및 전위 밀도 감소를 통한 인장성질 향상, Austenite계 경량철강의 k-carbide 형상 변화 및 전위 밀도 감소를 통한 인장성질 향상, 0, 0, - (2017)
  • Effect of Mn-segregation on Tensile Properties of Austenitic High Strength Steel , 2017년도 대한금속 재료학회 추계 학술대회, 0, 0, - (2017)
  • Austenite계 경량철강의 k-carbide 형상 변화 및 전위 밀도 감소를 통한 인장성질 향상 , 2017년도 대한금속 재료학회 추계 학술대회, 0, 0, - (2017)
  • High Specific Strength Alloys for Sustainable Society, High Specific Strength Alloys for Sustainable Society, 0, 0, - (2017)
  • Development of Precipitation Hardened Austenitic High Mn Steels for Automotive Applications, Development of Precipitation Hardened Austenitic High Mn Steels for Automotive Applications, 0, 0, - (2017)
  • Effect of Heat Treatment Paths on the Microstructure and Mechanical Properties of High Cr Containing Ultrahigh Strength Steels, Effect of Heat Treatment Paths on the Microstructure and Mechanical Properties of High Cr Containing Ultrahigh Strength Steels, 0, 0, - (2017)
  • Effect of Alloying Element on Deformation Behavior of Binary Magnesium Alloys, Effect of Alloying Element on Deformation Behavior of Binary Magnesium Alloys, 0, 0, - (2017)
  • Still Searching for Formable Mg Alloys , Still Searching for Formable Mg Alloys, 0, 0, - (2017)
  • Development of Mg Alloys Fomable at Room Temperature , Development of Mg Alloys Fomable at Room Temperature, 0, 0, - (2017)
  • Twin-roll Casting of Mg Alloys, ., 0, 0, - (2017)
  • Twin-roll Casting of Mg Alloys , Twin-roll Casting of Mg Alloys, 0, 0, - (2017)
  • Development of twin-roll cast Mg alloys for automotive applications, ., 0, 0, - (2017)
  • Development of twin-roll cast Mg alloys for automotive applications, FiMPART 2017, 0, 0, - (2017)
  • Development of twin-roll cast Mg alloys for automotive applications , Development of twin-roll cast Mg alloys for automotive applications, 0, 0, - (2017)
  • Deformation Behavior of High Mn Steels at Low Temperatures , Deformation Behavior of High Mn Steels at Low Temperatures, 0, 0, - (2017)
  • Effect of Alloying Element on Deformation Behavior of Binary Magnesium Alloys, Effect of Alloying Element on Deformation Behavior of Binary Magnesium Alloys, 0, 0, - (2017)
  • Effect of Alloying Element on Deformation Behavior of Binary Magnesium Alloys, Effect of Alloying Element on Deformation Behavior of Binary Magnesium Alloys, 0, 0, - (2017)
  • VCrMnFeCoNi 고엔트로피 합금의 상온 변형 쌍정을 이용한 극저온 기계적 강도 향상, VCrMnFeCoNi 고엔트로피 합금의 상온 변형 쌍정을 이용한 극저온 기계적 강도 향상, 0, 0, - (2017)
  • Effect of B2 Morphology on the Mechanical Properties of Dispersion Strengthened Lightweight Steels, Effect of B2 Morphology on the Mechanical Properties of Dispersion Strengthened Lightweight Steels, 0, 0, - (2017)
  • Austenite계 TRIP/TWIP강의 인장 성질에 미치는 Mn-segregation의 영향, Austenite계 TRIP/TWIP강의 인장 성질에 미치는 Mn-segregation의 영향, 0, 0, - (2017)
  • VCrMnFeCoNi 고엔트로피 합금의 상온 변형 쌍정을 이용한 극저온 기계적 강도 향상 , 2017년도 대한금속 재료학회 춘계 학술대회, 0, 0, - (2017)
  • Austenite계 TRIP/TWIP강의 인장 성질에 미치는 Mn-segregation의 영향 , 2017년도 대한금속 재료학회 춘계 학술대회, 0, 0, - (2017)
  • Effect of Deformation Twins on Recrystallization Behavior of Magnesium Alloy Sheets, Effect of Deformation Twins on Recrystallization Behavior of Magnesium Alloy Sheets, 0, 0, - (2017)
  • Development of High Specific Strength Alloys for Sustainable Society , Development of High Specific Strength Alloys for Sustainable Society, 0, 0, - (2017)
  • Effect of B2 Morphology on the Mechanical Properties of Dispersion Strengthened Lightweight Steels, Effect of B2 Morphology on the Mechanical Properties of Dispersion Strengthened Lightweight Steels, 0, 0, - (2017)
  • Development of High Strength Mg Alloys with Good Formability at Room Temperature, Development of High Strength Mg Alloys with Good Formability at Room Temperature, 0, 0, - (2017)
  • Effect of Strain Rate on Deformation Behavior of B2 (FeAl) Strengthened Lightweight Steels, ., 0, 0, - (2016)
  • High Strain Rate Deformation Behavior of High Mn Steels at Cryogenic Temperature, ., 0, 0, - (2016)
  • Effect of Strain Rate on Deformation Behavior of B2 (FeAl) Strengthened Lightweight Steels, ., 0, 0, - (2016)
  • Analysis of Strain Hardening in B2 Dual Phase Low-density Steel by in-situ Neutron Diffraction, ., 0, 0, - (2016)
  • Effect of Aging Treatment on Deformaton and Recrystallization Behavior of Magnesium Alloy Sheets, ., 0, 0, - (2016)
  • Effect of Al content on the Microstructure and Tensile Properties of Ferritic Lightweight Steels, ., 0, 0, - (2016)
  • Effect of Heat treatment Paths on the Microstructure and Tensile Properties of High Cr Containing Ultrahigh Strength Steels, ., 0, 0, - (2016)
  • TWIP강의 동적변형거동, ., 0, 0, - (2016)
  • Effect of Deformation Twins on Texture Evolution of Magnesium, ., 0, 0, - (2016)
  • Deformation Behavior of Nanocrystalline High Mn Steels, ., 0, 0, - (2016)
  • B2 Strengthened Light-Weight Steels, ., 0, 0, - (2016)
  • Effect of alloying element on deformation behavior of binary magnesium alloys, ., 0, 0, - (2016)
  • Property improvement of (ferrite + austenite) duplex lightweight steels by TRIP and TWIP mechanisms, ., 0, 0, - (2016)
  • Towards the development of Mg alloys formable at room temperature, ., 0, 0, - (2016)
  • An Atomistic Approach to Clarify the Role of Yttrium in Activation of Non-basal Slip in Magnesium, ., 0, 0, - (2016)
  • Deformation Behavior of High Mn steel Using Neutron Diffraction, ., 0, 0, - (2016)
  • Density Engineering of Steels: where to go?, ., 0, 0, - (2016)
  • Interpretation on Quashi-static and Dynamic Tensile Properties of TWinning Induced Plasticity (TWIP) Steel Sheet, ., 0, 0, - (2016)
  • Microstructure of Liquid Metal Embrittlement Cracks in Resistance-spot-welded Galvanized TWinning-Induced Plasticity (TWIP) steel Sheets, ., 0, 0, - (2016)
  • High Specific-strength Alloys for Sustainable Society, ., 0, 0, - (2016)
  • Design of High Strength Lightweight Steels with High Work Hardening Rate, ., 0, 0, - (2016)
  • 1-GPa-grade Ultra-high-strength (Ferrite + Austenite) Duplex Lightweight Steels Achieved by Fine Dislocation Substructures (Taylor Lattices), ., 0, 0, - (2016)
  • Korea’s R&D Activities Towards the Application of Wrought Mg Alloys, ., 0, 0, - (2016)
  • The Microstructure of As-Quenched 12Mn Steel, ., 0, 0, - (2016)
  • Effect of Aging Treatment on Texture Evolution of Magnesium Alloy Sheets:, ., 0, 0, - (2016)
  • Effect of Al Content on the Microstructure and Mechanical Properties of Lightweight Ferritic Steels, ., 0, 0, - (2015)
  • 오스테나이트계 고망간강 극저온 인장 및 충격특성, ., 0, 0, - (2015)
  • 초고강도 duplex 경량철강의 변형기구, ., 0, 0, - (2015)
  • Effects of strain rare and temperature on the mechanical properties and deformation behavior of high Mn TWIP steels, ., 0, 0, - (2015)
  • Fe-Al-Mn-C-Ni계 냉연 경량강판의 승온 중, 온도에 따른 구성상의 변화, ., 0, 0, - (2015)
  • Effect of Aging Treatment on Microstructure and Texture Evolution of Magnesium Alloy Sheets, ., 0, 0, - (2015)
  • Role of Zr in the Microstructure Evolution in Mg-Zn-Zr (ZK60) Based Wrought Alloys:, ., 0, 0, - (2015)
  • Twin-Roll Cast Mg Alloys: Structure and Properties, ., 0, 0, - (2015)
  • Phase transformation mechanism in Fe-Al-Mn-Ni-C base low-density steels comprising FCC and B2 phases during annealing of cold rolled sheet, ., 0, 0, - (2015)
  • Lightweight ferritic Fe-Al-Mn-Nb-C base steels: effect of Al content on the microstructure and mechanical properties, ., 0, 0, - (2015)
  • Phase evolution during heating of cold rolled Fe-Al-Mn-C-Ni base austenitic lightweight steels, ., 0, 0, - (2015)
  • Effect of k-carbide on Mechanical Properties of Fe-Al-Mn-C-Ni Lightweight Steels, ., 0, 0, - (2015)
  • Development of Corrosion Resistant, Ultra-high Strength Steel, ., 0, 0, - (2015)
  • High Strain Rate Deformation Behavior of High Mn TWIP Steels at Cryogenic Temperature, ., 0, 0, - (2015)
  • Effects of Mn and Al contents on Cryogenic-temperature Tensile and Chapy Impact Properties in Four Austenitic High-Mn Steels, ., 0, 0, - (2015)
  • Deformation Behavior of Nano-Structured High Mn Steels, ., 0, 0, - (2015)
  • Effect of Strain Rate on Deformation Behavior of High Mn TWIP Steel, ., 0, 0, - (2015)
  • Effects of Texture and Alloying Elements on Stretch Formability of Mg Alloy Sheets, ., 0, 0, - (2015)
  • Role of Zr in the Microstructure Evolution in Mg-Zn-Zr Based Wrought Alloys:, ., 0, 0, - (2015)
  • Interpretation of Cryogenic-Temperature Dynamic Mechanical Properties by Microstructural Evolution of Dynamically Deformed Specimens in Three Fe-(0.4~1.0)C-18Mn Austenitic Steels, ., 0, 0, - (2015)
  • Deformation Behavior of Mg Alloys during Stretch Forming, ., 0, 0, - (2015)
  • Effect of Annealing Temperature on the Microstructure and Mechanical and Mechanical properties of 5Mn-1Al-0.5Ti steel, ., 0, 0, - (2015)
  • Toughness Improvement of Ferritic Mn Steels for Low Temperature Application, ., 0, 0, - (2015)
  • Effect of Alloying Element on Deformation Behavior of Magnesium Alloys, ., 0, 0, - (2014)
  • Effect of Aging Treatment on Microstructure and Texture Evolution of Magnesium Alloy Sheets, ., 0, 0, - (2014)
  • 비저면 슬립과 인장 쌍정이 마그네슘 합금 판재의 상온 성형성에 미치는 영향, ., 0, 0, - (2014)
  • Ti계 비정질 합금 복합재료의 미세파괴과정의 직접 관찰, ., 0, 0, - (2014)
  • 페라이트-오스테나이트 Duplex 경량철강의 변형기구, ., 0, 0, - (2014)
  • Effect of Carbon Content on the Microstructure and Mechanical Property of Novel Lightweight Steels Comprising Austenite Matrix and B2 Dispersoid, ., 0, 0, - (2014)
  • Microstructure and Mechanical Properties of Cr-Mn-Cu-N steels, ., 0, 0, - (2014)
  • Extended Hall-Petch Relationship and Dutile-brittle Transition in Body-centered Cubic Steels, ., 0, 0, - (2014)
  • Development of Lightweight Ferritic Fe-Al-Mn-Nb-C Base Alloys, ., 0, 0, - (2014)
  • Twin-Induced Static Recrystallization Behavior of AZ31 Mg Alloy, ., 0, 0, - (2014)
  • Study on the Microstructure and Mechanical Property of Novel lightweight Steels Comprising Austenite Matrix and B2 Dispersoid, ., 0, 0, - (2014)
  • Deformation Behavior of Nano-Structured High Mn Steels, ., 0, 0, - (2014)
  • A Novel Alloy-Design-Route for Ductile Ultrahigh-Specific-Strength-Steels via Tailoring a Microstructure of B2-IMC Dispersoid in Austenite Matrix, ., 0, 0, - (2014)
  • High Strain Rate Deformation Behavior of TWIP Steels at Cryogenic Temperature, ., 0, 0, - (2014)
  • High strain rate deformation behavior of high Mn TWIP Steels at Cryogenic Temperature, ., 0, 0, - (2014)
  • Development of Mg Alloys Formable at Room Temperature, ., 0, 0, - (2014)
  • Origin of Intergranular Fracture in 8Mn Steel, ., 0, 0, - (2014)
  • Improvement of Mechanical Properties of Austenitic High Mn steels by Alloys Modification, ., 0, 0, - (2014)
  • Deformation Behavior of Nano-Structured High Mn Steels, ., 0, 0, - (2014)
  • Twin-induced Static Recrystallization Behavior of AZ31 Mg Alloy, ., 0, 0, - (2014)
  • The Effect of Alloying Elements on Deformation Behavior of Mg Alloys Under Uni-axial Tensile Loading, ., 0, 0, - (2014)
  • Effects of Carbon Addition on Deformation Behavior of High Mn Steels, ., 0, 0, - (2014)
  • High Specific Strength Alloys for Sustainable Society, ., 0, 0, - (2014)
  • Development of FCC/B2 dual phase lightweight steels, ., 0, 0, - (2013)
  • Effect of Nb and C additions on the microstructure and mechanical properties of lightweight ferritic Fe-Al-Mn alloys, ., 0, 0, - (2013)
  • Microstructure and mechanical properties of twin-roll cast Fe-Al-Mn-C lightweight steels, ., 0, 0, - (2013)
  • Effect of strain rate on the deformation behavior of a lean duplex stainless steel, ., 0, 0, - (2013)
  • Deformation behavior and Wear resistance of High Mn Steels, ., 0, 0, - (2013)
  • Muti-scale Computational Alloy and Process Design-Development of {100} Textured Steel Sheets, ., 0, 0, - (2013)
  • Structure and Properties of Twin-roll Cast Mg Alloys, ., 0, 0, - (2013)
  • Current Issues in Magnesium Sheet Alloys; Where Do We Go from Here, ., 0, 0, - (2013)
  • Mg합금 판재에서 성형성 향상에 미치는 texture의 영향, ., 0, 0, - (2013)
  • Improvement of Low Temperature Toughness in Ferritic Mn Steels with Substitutional Alloying Elements, ., 0, 0, - (2013)
  • Microstructure and Mechanical Properties of Lightweight Ferritic Fe-Al-Mn-Nb-C Alloys, ., 0, 0, - (2013)
  • 고강도 저항복비 베이나이트강의 냉각 시작 및 종료 온도가 미세조직과 기계적 성질에 미치는 영향, ., 0, 0, - (2013)
  • Possibility of Novel Microstructure Comprising B2 Dispersoid and FCC Matrix: Microstructure Formation and Mechanical Property, ., 0, 0, - (2013)
  • Effect of Strain Rate on the Deformation Behavior of a Lean Duplex Stainless Steel, ., 0, 0, - (2013)
  • Multi-Scale Computational Alloy and Process Design – A Success Story, ., 0, 0, - (2013)
  • Effect of Texture on Formability of Mg Alloys, ., 0, 0, - (2013)
  • Effect of Initial Texture and Alloying Elements on the Deformation Behavior of Mg Alloys, ., 0, 0, - (2013)
  • Improved Formability due to a Change in the Deformation Band of Magnesium Alloy, ., 0, 0, - (2013)
  • Effect of Zr on twin roll cast-hot rolled Mg-Zn alloy, ., 0, 0, - (2013)
  • Effect of initial texture and alloying elements on the deformation behavior of Mg alloys, ., 0, 0, - (2013)
  • Towards the Development of Mg Alloys Formable at Room Temperature, ., 0, 0, - (2013)
  • Characterization of biodegradable magnesium single crystals with various crystallographic orientations, ., 0, 0, - (2013)
  • Influence of Roll Separation Force and Rolling Reduction on Mechanical Properties of AT33 Mg Alloy, ., 0, 0, - (2013)
  • Effects of Substitutional Alloying Elements on Toughness of Ferritic Mn Steels at Low Temperature, ., 0, 0, - (2013)
  • Dynamic Compressive Deformation Behavior of Austenitic High-Manganese Steels Used for Extremely-Low-Temperature Applications, ., 0, 0, - (2013)
  • Prevention of Intergranular Fracture in Martensitic Mn Steels at Cryogenic Environment, ., 0, 0, - (2013)
  • Deformation Behavior of Austenitic High Mn Steel at Cryogenic Temperature, ., 0, 0, - (2013)
  • Low Temperature Deformation Behavior and Wear Resistance of High Mn Steels, ., 0, 0, - (2013)
  • Development of Dispersion-Strengthened Lightweight Steels, ., 0, 0, - (2013)
  • Recrystallization behavior of twin in AZ31 Mg alloy during annealing treatment, ., 0, 0, - (2013)
  • High strain rate deformation behavior of austenitic high Mn steels at cryogenic temperature, ., 0, 0, - (2013)
  • Deformation Behavior of Mg-Zn-Ca Alloy Sheets under Biaxial Loading, ., 0, 0, - (2013)
  • High Strain Rate Deformation Behavior of Austenitic High Mn Steels at Cryogenic Temperature, ., 0, 0, - (2013)
  • Deformation-induced Phase Transformation and Wear Resistance of High Mn Steels, ., 0, 0, - (2013)
  • 분산 강화 효과를 이용한 경량철강재료 개발, ., 0, 0, - (2013)
  • 나노인덴테이션과 유한요소법을 결합한 철 분말의 응력-변형률 곡선 측정, ., 0, 0, - (2013)
  • ZX31 판재에서 texture의 변화의 영향, ., 0, 0, - (2013)
  • Inverse Fracture Occurring during Drop Weight Tear Teat (DWTT) and Stain Hardening Obtained from Dynamic Compressive Test in Lineplpe Steels, ., 0, 0, - (2013)
  • Twin-roll casting of wrought Mg Alloys-An overview, ., 0, 0, - (2012)
  • Effect of Sn addition on microstructure and mechanical properties of twin-roll cast Mg-Zn-Ca alloy sheets, ., 0, 0, - (2012)
  • Texture modification of twin-roll cast Mg-Zn alloys by Ca addition, ., 0, 0, - (2012)
  • 쾌삭상에서 Chip 형성거동과 동적 비틀림 성질, ., 0, 0, - (2012)
  • Modeling the Texture Evolution of Mg Alloys Thermo-Mechanical Treatment, ., 0, 0, - (2012)
  • Effects of Nitrogen on the Microstructure and Deformation Behavior of Fe-Cr-Mn-N Austenitic Steels, ., 0, 0, - (2012)
  • Deformation Behavior and Mechanical Properties of Austenitic High Mn steels at Low Temperautures, ., 0, 0, - (2012)
  • Toughness Improvement of Martensitic Fe-Mn Alloys at Low Temperatures, ., 0, 0, - (2012)
  • Microstructure and Mechanical Properties of Mg-Al-Sn Alloy sheets Fabricated by Twin-Roll Casting, ., 0, 0, - (2012)
  • 쌍롤 주조법으로 제조한 고강도/고성형 마그네슘 신합금 판재의 특성, ., 0, 0, - (2012)
  • Alloying Effects on the Toughness of Martensite Fe-Mn Alloys at Low Temperature, ., 0, 0, - (2012)
  • Surface Segregation of Phophorus and Its Influence on the Texture Evolution of Si steel, ., 0, 0, - (2012)
  • Microstructural Evolution in TWIP steels during Wire Drawing, ., 0, 0, - (2012)
  • Effect of Mn addition on the Microstructure and Mechanical Properties of Fe-Al Alloys, ., 0, 0, - (2012)
  • Effects of Nitrogen on Work Hardening Behavior of Austenitic High Nitrogen Steel, ., 0, 0, - (2012)
  • Origin of Intergranular Embrittlement in Martensitic Mn steels at Cryogenic Enviroment, ., 0, 0, - (2012)
  • Effect of Sn addition on Mechanical Properties of Twin-Roll Cast Mg-Zn-Ca Alloy Sheets, ., 0, 0, - (2012)
  • Mg Alloys for Automotive Applications: Opportunities and Challenges, ., 0, 0, - (2012)
  • High-Temperature Oxidation Behavior and Corrosion Resistance of Mg-Al Zn-Ca Y Magnesium Alloys, ., 0, 0, - (2012)
  • Microstructure and Texture of Mg-4Zn-1Gd Alloy Processed by Differential Speed Rolling, ., 0, 0, - (2012)
  • Effect of Ca addition on mechanical properties and texture evolution of twin-roll cast Mg-Zn alloy sheets, ., 0, 0, - (2012)
  • Effect of Mn addition on the microstructure and mechanical properties of Fe-Al Alloys, ., 0, 0, - (2012)
  • Effects of nitrogen on work hardening behavior of austenitic high nitrogen steel, ., 0, 0, - (2012)
  • Temperature dependence of mechanical properties and deformation behavior of austenite-base high Mn steels, ., 0, 0, - (2012)
  • Microstructural evolution in TWIP steels during wire drawing, ., 0, 0, - (2012)
  • The improvement of toughness at low temperature in ferritic Fe-Mn steels, ., 0, 0, - (2012)
  • Structure and Properties of Mg Alloys, ., 0, 0, - (2012)
  • Mechanical properties and Texture Moditication of Mg-Zn Alloy Sheets by the addition of Ca, ., 0, 0, - (2012)
  • Origin of Intergranular Embrittlement in High Mn Steels at Cryogenic Environment, ., 0, 0, - (2012)
  • Effect of Constituent Phases on Low Temperature Deformation Behavior of Austenite-Base High Mn Steels, ., 0, 0, - (2012)
  • Deformation Behavior and Wear Resistance of High Mn Steels at Low Temperature, ., 0, 0, - (2012)
  • Correlation of Microstructure and Tensile and Cup Forming Properties of Aluminum-added TWinning Induced Plasticity (TWIP) Steels, ., 0, 0, - (2012)
  • Correlation of Microstructure and Tensile and Charpy Impact Properties of Cu- and B- containing Bainitic Steels, ., 0, 0, - (2012)
  • In-situ study on deformation behavior of austenite-base Duplex High Mn steels, ., 0, 0, - (2012)
  • Development of High Specific-Strength Alloys for Sustainable Society, ., 0, 0, - (2012)
  • In-situ study on deformation behavior of austenite-base Duplex High Mn steels, ., 0, 0, - (2012)
  • Mg-Zn-Ca 합금에서 재결정시 basal texture 변화의 영향, ., 0, 0, - (2012)
  • Effect of Mn and Ni Additions on the Microstructure of Fe-Al Alloys, ., 0, 0, - (2012)
  • Effect of Constituent Phases on Low Temperature Deformation Behavior of Austenite-Base High Mn Steels, ., 0, 0, - (2012)
  • Microstructure and Textrue of Mg-4Zn-1Gd Alloy Processed by Differential Speed Rolling, ., 0, 0, - (2012)
  • Estimation of Yield Strength of Linepipe Steel Piptes by Stress-Strain Curves Obtained Low-Cycle Fatigue Tests, ., 0, 0, - (2012)
  • Nanoindentation Analysis for Local Properties of Ultrafine Grained Copper Processed by High Pressure Torsion, ., 0, 0, - (2012)
  • Mechanical properties and High-temperature Oxidation Behavior of Mg-Al-Zn-Ca-Y Magnesium Alloys, ., 0, 0, - (2012)
  • Effect of Ca Addition on Texture Evolution and Deformation Behavior of Mg-Zn Alloy Sheets, ., 0, 0, - (2012)
  • Design of Ductile Bulk Metallic Glass Composite via Utilization of Transformation-Induced Plasticity, ., 0, 0, - (2012)
  • Lightweight Steels, ., 0, 0, - (2012)
  • TWIP강의 성형성에 미치는 Al 첨가의 영향, ., 0, 0, - (2011)
  • Al 첨가가 컵 성형된 TWIP 강의 지연파괴에 미치는 영향, ., 0, 0, - (2011)
  • In-situ Neutron Diffraction Study on Deformation Behavior of Austenite-Base High Mn steels, 대한금속재료학회, 0, 0, - (2011)
  • Mg-Zn-Ca 합금의 미세조직 및 변형거동에 대한 연구, ., 0, 0, - (2011)
  • Effects of Nitrogen on Deformation Behavior of Austenite High Nitrogen Steel, ., 0, 0, - (2011)
  • Microstrcuture and Magnetic Properties of Hihg Si Steel Produced by Twin Roll Casting Process, ., 0, 0, - (2011)
  • 쾌삭상 선재의 압연 시 발생하는 Alligatoring 균열, ., 0, 0, - (2011)
  • S, Pb-S, Bi-S계 쾌삭강의 준정적 및 동적 비틀림 변형 거동, ., 0, 0, - (2011)
  • 베이나이트계 고강도강의 냉각종료 온도차이에 따른 미세조직과 기계적 성질의 상관관계, ., 0, 0, - (2011)
  • Effect of Microstructure on Low Temperature Mechanical Properties of Austenite-Based High Mn Steels, ., 0, 0, - (2011)
  • Effects of Nitrogen on Deformation Behavior of Austenite High Nitrogen Steel, ., 0, 0, - (2011)
  • Deformation behavior of twin-roll cast Mg-4Zn-1Gd alloy sheet, ., 0, 0, - (2011)
  • Effect of differential speed rolling on texture evolution of Mg-4Zn-1Gd alloy, ., 0, 0, - (2011)
  • Texture modification of Mg-Zn alloy sheets by the addition of Ca, ., 0, 0, - (2011)
  • Microstructure and mechanical properties of Mg-Al-Sn alloy sheets fabricated by twin-roll casting, ., 0, 0, - (2011)
  • Effect of Mn and Ni additions on the Microstructure of Fe-Al Alloys, ., 0, 0, - (2011)
  • Magnetic and Mechanical Properties of 6.5 wt% Si steel Produced by Twin Roll Casting Process, ., 0, 0, - (2011)
  • In-situ Neutron Diffraction Study on Deformation Behavior of Austenite-Base High Mn Steels, ., 0, 0, - (2011)
  • Low Temperature Mechanical Properties of Austenite-Base High Mn steels, ., 0, 0, - (2011)
  • Deformation Behavior of Twin-Roll Cast Mg-4Zn-1Gd Alloy Sheet, ., 0, 0, - (2011)
  • Morphology and Crystallography of Martensite in Fe-12Mn Alloy, ., 0, 0, - (2011)
  • Deformation behavior and mechanical properties of high Mn steels at low temperature, ., 0, 0, - (2011)
  • Deformation behavior of Ferrite-base lightweight Fe-Mn-Al-C steels, ., 0, 0, - (2011)
  • Martensite transformation in 12Mn steel, ., 0, 0, - (2011)
  • Deformation Beharior of Twin-Roll Cast Mg-4Zn-1Gd Alloy Sheet, ., 0, 0, - (2011)
  • Effects of k-carbides on Mechanical Properties in Ferritic C-Mn-Al Light weight Steels, ., 0, 0, - (2011)
  • Cracking Phenomenon Occurring durin Hot Rolling of Bi-containing Free-Cutting steel Rods, ., 0, 0, - (2011)
  • Deformation behavior of Ferrite-base lightweight Fe-Mn-Al-C steel, ., 0, 0, - (2011)
  • Deformation behavior and mechanical properties of Mg-Zn-Ca alloys, ., 0, 0, - (2011)
  • Deformation behavior and mechanical properties of high Mn steels at low temperatures, ., 0, 0, - (2011)
  • Martensitic transformation in 12Mn steel, ., 0, 0, - (2011)
  • Deformation behavior and mechanical properties of high Mn steels at low temperatures, ., 0, 0, - (2011)
  • Deformation behavior of ferrite-base lightweight Fe-Mn-Al-C steel, ., 0, 0, - (2011)
  • Mechanical Property Improvement of Ti-Based Bulk Metallic Glass Composites Containing Ductile Dendrites, ., 0, 0, - (2011)
  • 기가급 고강도강의 미세조직 및 샤르피 충격특성에 미치는 B, Cu의 영향, ., 0, 0, - (2011)
  • 고 Al 경량철강재료의 미세조직 형성에 따른 기계적 물성에 미치는 냉각조건의 영향, ., 0, 0, - (2011)
  • Effect of Differential Speed Rolling on Texture Evolution of Mg-4Zn-1Gd Alloy, ., 0, 0, - (2011)
  • Effect of Post Weld Heat Treatment on Low Temperature Properties of A516-70 Pressure Vessel Steel, ., 0, 0, - (2010)
  • Microstructural Development in Fe-12Mn Steel, ., 0, 0, - (2010)
  • Deformtaion Behvior of Austenite-Base High Mn Steels, ., 0, 0, - (2010)
  • 오스테나이트계 고 Mn강의 변형 거동 해석, ., 0, 0, - (2010)
  • Fe-12Mn 이원계 합금강의 미세조직 특성, ., 0, 0, - (2010)
  • Deformation Behavior of Ferrite-base Lightweight Fe-Mn-Al-C Steels, ., 0, 0, - (2010)
  • Microstructure and Mechanical Properties Mg-Al-Sn Alloys by Fabricated Twin-roll Casting, ., 0, 0, - (2010)
  • 쌍롤식 박판주조법에 의하여 제조된 Mg 합금의 상온성형성에 대한 연구, ., 0, 0, - (2010)
  • 쌍정롤 캐스팅 Mg-4Zn-1Gd 합금 판재의 변형거동 해석, ., 0, 0, - (2010)
  • Mg-4Zn-1Gd 합금의 집합조직 거동변화에 미치는 이속압연의 효과, ., 0, 0, - (2010)
  • 고 Al 경량철강재료의 미세조직 형성에 따른 기계적 물성에 미치는 열처리 온도의 영향, ., 0, 0, - (2010)
  • 베이나이트계 고강도강의 저온변태 미세조직과 기계적 성질, ., 0, 0, - (2010)
  • API X80 라인파이프강의 DWTT 파괴특성에 미치는 마무리 압연온도의 영향, ., 0, 0, - (2010)
  • Tensile properties and cup formability of high Mn and Al-added TWIP steels, ., 0, 0, - (2010)
  • Effect of Alloying Elements on Texture Evolution of Twin-Roll Cast Magnesium Alloys, ., 0, 0, - (2010)
  • Deformation Behavior of Austenite-Base High Mn Steels, ., 0, 0, - (2010)
  • Solidification Behavior of Mg Alloys during Twin-Roll Casting, ., 0, 0, - (2010)
  • Effect of Aging on the Microstructure and Tensile Properties of Lightweight Fe-Mn-Al-C Steel, ., 0, 0, - (2010)
  • Microstructure and Texture Evolution of Twin-Roll Cast Magnesium Alloys during Thermo-Mechanical Treatments, ., 0, 0, - (2010)
  • Deformation Behavior of Twin-Roll Cast Mg-Zn-Gd Alloy Sheet, ., 0, 0, - (2010)
  • Deformation Behavior of Ferrite-Base Lightweight Fe-Mn-Al-C Steel, ., 0, 0, - (2010)
  • Effect of Aging on the Microstructure and Tensile Properties of Lightweight Fe-Mn-Al-C Steel, ., 0, 0, - (2010)
  • Microstructure and Texture Evolution of Twin-Roll Cast Magnesium Alloys during Thermo-Mechanical Treatments, ., 0, 0, - (2010)
  • Deformation Behavior of Twin-Roll Cast Mg-Zn-Gd Alloy Sheet, ., 0, 0, - (2010)
  • Deformation Behavior of Austenite-Base High Mn Steels, ., 0, 0, - (2010)
  • Solidification Behavior of Mg Alloys during Twin-Roll Casting, ., 0, 0, - (2010)
  • Deformation Behavior of Ferrite-Base Lightweight Fe-Mn-Al-C Steel, ., 0, 0, - (2010)
  • Effect fo Thermo-mechanical Treatment on the Texture Evolution of Mg Alloys, ., 0, 0, - (2010)
  • 컵 성형된 Fe-Mn-Al게 TWIP강의 변형 및 파괴기구, ., 0, 0, - (2010)
  • Formability of Mg Alloys at Room Temperature, ., 0, 0, - (2010)
  • Finite and Experimental Analyses of Ultrafine Microstructure Evolution and Plastic Deformation of Copper under Various Pressures by High Pressure Torsion, ., 0, 0, - (2010)
  • Thermo-Mechanical Processing Design of Mg Alloys with High Strength and Formability via Twin-Roll Casting, ., 0, 0, - (2010)
  • 고 Mn 강의 강화기구 및 변형 유기 상변태 해석, ., 0, 0, - (2009)
  • 열간 압연한 Fe-Mn-Al 경량철강판재의 미세조직 및 파괴 특성 연구, ., 0, 0, - (2009)
  • 경량철강판의 냉간압연 중 발생하는 균열 현상 연구” 대한금속재료학회 추계 학술대회, ., 0, 0, - (2009)
  • 고강도 고연성 Ti 계 비정질 합금의 변형거동, ., 0, 0, - (2009)
  • Formability of Mg Alloys at Room Temperature, ., 0, 0, - (2009)
  • Effect of Thero-mechanical Treatment on the Texture Evolution of Mg Alloys, ., 0, 0, - (2009)
  • Deformation Behavior of Twin-roll cast Mg-4Zn-1Gd Alloy sheet, ., 0, 0, - (2009)
  • Room Temperature Formability of Mg Alloys, ., 0, 0, - (2009)
  • Room Temperature Formability of Mg Alloys, ., 0, 0, - (2009)
  • Twin-Roll Cast Al-Clad Magnesium Alloy, ., 0, 0, - (2009)
  • Processing & Joining of Light Metal Alloys, ., 0, 0, - (2009)
  • Deformation Behavior of Dual Phase Fe-Mn-Al-C Steel Consisting of Ferrite and Austenite, ., 0, 0, - (2009)
  • Effect of k-Carbide Nano-Precipitates on the Deformation Behavior of Austenite Base Lightweight Fe-Mn-Al-C Steel, ., 0, 0, - (2009)
  • Microstructure and Mechanical Properties of Twin-Roll Cast Mg Alloys, ., 0, 0, - (2009)
  • 쌍롤식 박판주조법에 의하여 제조된 Mg 합금의 미세조직 및 집합조직에 미치는 가공 열처리의 영향, ., 0, 0, - (2009)
  • Twin-Roll Cast Al-clad Mg Alloy, ., 0, 0, - (2009)
  • Ferrite 와 k-carbide로 이루어진 이상 조직을 갖는 Fe-Mn-Al-C 합금의 변형거동, ., 0, 0, - (2009)
  • 마그네슘 합금의 상온 성형성에 대한 연구, ., 0, 0, - (2009)
  • Fe-Mn-Al-C 오스테나이트계 경량 철강 재료의 변형기구에 미치는 나노 k-carbide의 영향, ., 0, 0, - (2009)
  • Effect of Thermo-Mechanical Treatment on Texture Evolution of Twin-Roll Cast Mg Alloys with Various Second Phase Particles, ., 0, 0, - (2009)
  • Effects of Alloying Elements on Mechanical Properities of API X80 Linepipe Steels, ., 0, 0, - (2009)
  • Thermodynamic Modeling and Its Applications to Mg-Sn Based Alloy Development, TMS2009, 0, 0, - (2009)
  • Effect of thermo-Mechanical Treatment on the Microstructure and Texture Evolution of Twin-roll Cast Mg Alloys, ., 0, 0, - (2008)
  • Al Clad Mg Alloy Fabricated by Twin-roll Casting, ., 0, 0, - (2008)
  • Twin-roll Casting of Mg Alloys, ., 0, 0, - (2008)
  • Effect of Microstructure on the Room Temperature Formability of Mg Alloy Sheets Fabricated by Twin-Roll Strip Casting, ., 0, 0, - (2008)
  • Effects of Second Phase Particle on Microstructure and Texture Evolution of Twin-Roll Cast mg Alloys During Thermo-mechanical Treatment, ., 0, 0, - (2008)
  • Development of High Performance Alloy Sheets by Twin-roll Strip Casting, ., 0, 0, - (2006)
  • Development of High Performance Alloy Sheets by Strip Casting, International Conference on Solidification Science and Processing ?Emerging Trends, 0, 0, - (2005)
  • Fracture Mechanism of Strip-cast Zr-Ti-Cu-Ni-Be Bulk Amorphous Alloy Composites, 나노복합재료 심포지엄, 0, 0, 129-134 (2003)
  • Solidification Modeling of Bulk Amorphous Alloys, 2003 MRS Fall Meeting, 0, 0, - (2003)
  • 가속전자빔 투사된 고속도강 압연롤의 미세조직 개선 연구, ., 0, 0, - (1995)
  • 고강도 냉연강판의 변태유기소성 현상, ., 0, 0, - (1995)
  • Ti3Al-Nb 합금의 피로균열 전파 특성, ., 0, 0, - (1994)
  • 열연강판 Cupping시의 수직균열 현상 연구, ., 0, 0, - (1994)
  • Al-Li 합금의 저온 미세파괴과정의 관찰, ., 0, 0, - (1994)
  • Melt-Overflow법으로 제조한 Al-Fe-V-Si 합금 2차상의 상변태과정, ., 0, 0, - (1994)
  • Effect of Microstructural Modification on Mechnical Properties of Cast A356 Al-SiCp Composites, ., 0, 0, - (1993)
  • PST-TiAl 금속간화합물의 변형 및 파괴거동의 TEM직접관찰, ., 0, 0, - (1993)
  • 긱계적합금화에 의해 제조된 NiAl계 금속간화합물의 미세조직 및 기계적 특성, ., 0, 0, - (1993)
  • 급냉응고한 Al합금의 마멸특성에 미치는 마멸속도 및 시험온도의 영향, ., 0, 0, - (1993)
  • 고속도강 압연 roll의 미세조직 연구, ., 0, 0, - (1993)
  • 급냉응고에 의한 Mg 합금 개발, ., 0, 0, - (1992)
  • Al-Li 합금의 탄도충격특성 연구, ., 0, 0, - (1992)
  • SEM 관찰에 의한 8090 Al-Li 합금의 파괴기구 연구, ., 0, 0, - (1991)
  • α2상의 형상이 Ti3Al-Nb 합금의 기계적 성질에 미치는 영향, ., 0, 0, - (1991)
  • RSP Al-Li-Zr 합금과 극저온에서의 기계적 성질, ., 0, 0, - (1991)
  • 고온용 Al합금 개발, ., 0, 0, - (1991)
  • 급냉응고 Al-Fe-V-Si 합금 조직의 전자현미경 분석, ., 0, 0, - (1991)
  • Al-SiCw 복합재료의 분말야금법에 의한 제조와 특성 연구, ., 0, 0, - (1990)
  • 급냉응고/분말야금법에 의한 신금속재료 개발, ., 0, 0, - (1990)
  • 방탄재료에서의 Dynamic Fracture 평가기법 연구, ., 0, 0, - (1990)
  • 주조 A356 Al-SiCp 복합재료의 파괴거동에 대한 공정 Si입자의 영향, ., 0, 0, - (1990)
  • SiC Whisker 첨가가 2124 Al 합금의 고온인장과 변형거동에 미치는 영향, ., 0, 0, - (1990)
  • SEM 직접관찰에 의한 템퍼드 마르텐사이트 취성파괴 연구, ., 0, 0, - (1990)
  • Al-Li 합금의 변형 및 파괴거동-Review, ., 0, 0, - (1990)
  • Al-Li합금의 상변태거동-Review, ., 0, 0, - (1990)
  • 급냉응고한 Al 합금의 기계적 성질에 미치는 고온노출효과에 관한 연구, ., 0, 0, - (1989)
  • 도상 마르텐사이트가 고장력강 용접부의 파괴기구에 미치는 영향, ., 0, 0, - (1989)
  • 고강도 고인성 Ti계 비정질 복합재료, 대한금속재료학회 추계 학술대회, 0, 0, - (0000)
  • 베이나이트 기지를 가지는 HSLA 강재의 물성에 미치는 구성상의 영향, 제22회 첨단구조재료 심포지엄, 0, 0, - (0000)
  • API X70 라인파이프강의 미세조직과 Charpy 충격 특성에 미치는 Cr, V, Mo의 영향, 대한금속재료학회 춘계학술대회, 0, 0, - (0000)
  • API X70 라인파이프강의 정적 재결정 거동 예측, 대한금속재료학회 춘계 학술대회, 0, 0, - (0000)
  • Cladding of Al on Mg Alloy during Twin-Roll Casting, MRS international Materials Research Conference, 0, 0, - (0000)
  • Development of High Performance Mg Alloys via Twin-Roll Casting, MRS international Materials Research Conference, 0, 0, - (0000)
  • Effect of Constituent Phases on the Mechanical Properties of Bainite-Base Multiphases Steels, New Developments on Metallurgy and Applications of High Strength Steels, 0, 0, - (0000)
  • Effect of Microstructure on the Room Temperature Formability of Mg Alloys, MRS international Materials Research Conference, 0, 0, - (0000)
  • Effects of Additional Alloying Elements on the Microstructure and Mechanical Properties of Twin-Roll Cast AZ31-X Alloys, MRS international Materials Research Conference, 0, 0, - (0000)
  • Effects of Second Phase Particle on Microstructure and Texture Evolution of Twin-Roll Cast Mg Alloys During Thermo-mechanical Treatment, Korean Institute of Metals and Materials 2008 Spring Conference, 0, 0, - (0000)
  • Effects of Second Phase Particles on Texture Evolution of Twin-Roll Cast Ma Alloys during Thermo-Mechanical Treatment, MRS international Materials Research Conference, 0, 0, - (0000)
  • Microstructure and Mechanical Properties of Twin-Roll Strip Cast Mg Alloys, 11th China-Korea Workshop on Advanced Materials ? Light Metal Materials, 0, 0, - (0000)
  • Ti-base amorphous composite alloys with enchanced ductility, Joint Symposium on Materials Science and Engineering for the 21st Century, 0, 0, - (0000)
  • Ti-base amorphous composite alloys with enhanced ductility, The Sixth International Conference on Bulk Metallic Glasses, 0, 0, - (0000)
  • Microstructural Evolution in Mechanically Alloyed Al/AlN Composite, ISMANAM-2002, 0, 0, - (0000)
  • On the Undercooling of Aluminum Powders Produced by Uniform Droplet Spray Process, ISMANAM-2002, 0, 0, - (0000)
  • Strip Casting of Zr-Ti-Cu-Ni-Be Bulk Amorphous Alloy, ISMANAM-2002, 0, 0, - (0000)
  • 라인파이프강의 항복비와 저온인성에 미치는 미세조직의 영향, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • Improved Structural Stability of Nanocrystalline Aluminum Alloys Produced by Mechanical Alloying, The 2002 Korea-US Symposium-Phase Transformation of Nano-Materials, 0, 0, - (0000)
  • Strip Casting법으로 제조된 Zr-Ti-Cu-Ni-Be 벌크 비정질 합금의 미세조직 특성, 응고관련기술 심포지엄, 0, 0, - (0000)
  • Strip Casting을 이용한 마그네슘합금의 판재제조, 응고관련기술 심포지엄, 0, 0, - (0000)
  • Uniform Droplet Process로 제조된 알루미늄 액적의 열이력과 핵생성 거동분석, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • Fabrication of Mg Alloy Strips by Strip Casting, PSTAM 2003, 0, 0, - (0000)
  • Tensile and Creep Properties of Squeeze Cast Mg Alloys with Various Second Phases, PSTAM 2003, 0, 0, - (0000)
  • Microstructural Stability in Non-Equilibrium Processed Alloys, TMS 2003, 0, 0, - (0000)
  • API-X70급 라인파이프강의 압연조건-미세조직-물성 상관관계 연, 제15회 포스코 철강기술 컨퍼런스, 0, 0, - (0000)
  • Kinetics of crystallization in continuous cooled BMG, BMGIII 2003, 0, 0, - (0000)
  • Mechanical Property and Fracture Behavior of Strip Cast Zr-base BMG Alloy Containing Crystalline Phase, BMGIII 2003, 0, 0, - (0000)
  • Prediction of Glass Forming Ability of Amorphous Alloys by Thermodynamic Approach, BMGIII 2003, 0, 0, - (0000)
  • 고인성 라이파이프강의 DWTT 특성과 비정상 파괴양상에 대한 연구, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • 정밀주조 Ti-6Al-4V 합금 용접부의 피로성질에 미치는 해수분위기의 영향, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • Development of High Temperature Magnesium Alloys, The Third International Conference on Light Materials for transportation Systems (LiMAT 2003), 0, 0, - (0000)
  • Effects of Hot Rolling Conditions on the Microstructures and Mechanical Properties of Linepipe Steels, MS&T 2003, 0, 0, - (0000)
  • Nucleation Kinetics and Glass Forming Ability of Undercooled Amorphous Alloys, 2nd Circular The 2003 Korea-Japan Symposium, 0, 0, - (0000)
  • Development of High Performance Alloys by Strip Casting, The 2nd Korea-US Workshop on Advances in Metallic Structural Materials, 0, 0, - (0000)
  • Strip Casting: Novel Fabrication Method for Bulk Amorphous Alloy Sheets, 6th KIM-JIM Symposium on Nano-structured and Non-equilibrium Materials, 0, 0, - (0000)
  • 구성방정식의 재료상수와 항복비의 상관관계, 대한금속재료학회 춘계학술대회, 0, 0, - (0000)
  • 비결정질합금의 연속냉각에서의 결정화 거동, 대한금속재료학회 춘계학술대회, 0, 0, - (0000)
  • 박판주조법에 의한 비평형합금 판재 개발, NRL 금속재료 기술교류회, 0, 0, - (0000)
  • Design of Structural Alloys Using Second Phases, The Third Sino-Korean Conference on Advanced Manufacturing Technology, 0, 0, - (0000)
  • Prediction of Crystallization Kinetics and Glass Forming Ability of Bulk Amorphous Alloys, The 1st KITECH-KU Symposium on Bulk Metallic Glasses and Pulsed Power Processing, 0, 0, - (0000)
  • 비정질합금의 결정화 거동에 관한 접근법 및 평가, 상변태 열역학심포지움, 0, 0, - (0000)
  • Strip Casting of High Performance Structural Alloys, The 8th Korea-China Workshop on Advanced Materials, 0, 0, - (0000)
  • Fabrication of Bulk Amorphous Alloy Sheets by Strip Casting, ISMANAM-2004, 0, 0, - (0000)
  • Kinetic Assessment of Crystallization of Bulk Amorphous Alloys during Cooling, ISMANAM-2004, 0, 0, - (0000)
  • The Effect of Strain on the Crystallization Kinetics of Bulk Amorphous Alloys, ISMANAM-2004, 0, 0, - (0000)
  • Thermodynamic Approach for Predicting the Glass Forming Ability of Amorphous Alloys, ISMANAM-2004, 0, 0, - (0000)
  • Development of Strip Casting Process for Fabrication of Wrought Mg Alloys, 2004 International Conference on Magnesium ?Science, Technology and Applications, 0, 0, - (0000)
  • Tensile and Creep Properties of Magnesium Alloys Incorporating Dispersoids Within Matrix, 2004 International Conference on Magnesium ?Science, Technology and Applications, 0, 0, - (0000)
  • Continuous Fabrication of Bulk Amorphous Alloy Sheet by Strip Casing, JIM 2004 Fall Meeting (Materials Science for Metallic Glasses), 0, 0, - (0000)
  • Prediction of Composition Dependency of Glass Forming Ability by Thermodynamic Approach, JIM 2004 Fall Meeting (Materials Science for Metallic Glasses), 0, 0, - (0000)
  • 고강도 라인파이프강의 물성에 미치는 잔류 오스테나이트의 영향, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • 고에너지 전자빔 투사방법을 이용한 비정질 합금 표면복합재료의 제조, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • 고인성 라인파이프강의 CVN, DWTT 에너지와 CTOD의 상관관계, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • 마그네슘 합금의 고온특성에 미치는 이차상의 영향, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • 비정질 형성능 예측에 관한 열역학적 접금방법, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • 박판주조법에 의한 고강도 마그네슘합금 판재 개발, 대한금속재료학회 추계학술대회 (응고기술 심포지엄), 0, 0, - (0000)
  • 박판주조법을 이용한 비결정질 합금판재의 제조, 대한금속재료학회 추계학술대회 (응고기술 심포지엄), 0, 0, - (0000)
  • Correlation of Yield Ratio with Materials Constants of Constitutive Equation, PRICM 5, 0, 0, - (0000)
  • Development of Creep Resistant Mg Alloys, PRICM 5, 0, 0, - (0000)
  • Development of Mg Alloy Sheets via Strip Casting, PRICM 5, 0, 0, - (0000)
  • Effects of Microstructure and Environment on Fatigue Properties of Investment Cast Ti-6Al-4V Alloy Welds, PRICM 5, 0, 0, - (0000)
  • Prediction of Glass Forming Ability of Amorphous Alloys by Thermodynamic Approach, The 2nd KITECH-KU Symposium on Bulk Metallic Glasses and Pulsed-Power Processing, 0, 0, - (0000)
  • Development of High Performance Alloy Sheets by Strip Casting, TMS 2005, 0, 0, - (0000)
  • 라인파이프강에서 침상형 조직의 변태거동과 형태학적 특징, 대한금속재료학회 춘계학, 0, 0, - (0000)
  • 비정질 합금의 Twin-roll Strip Casting, 대한금속재료학회 춘계학술대회, 0, 0, - (0000)
  • Development of Mg Alloy Sheets via Strip Casting, Mg Alloys: EmergingTrends, 0, 0, - (0000)
  • Microstructure and Elevated Temperature Properties of Mg-Sn Based Alloys, Mg Alloys: EmergingTrends, 0, 0, - (0000)
  • Continuous Fabrication of Bulk Amorphous Alloy Sheet by Twin-Roll Strip Casting, BMGIV 2005, 0, 0, - (0000)
  • Development of Creep Resistant Cast Mg-Sn-Based Alloys, ICASP, 0, 0, - (0000)
  • Corrosion behavior of Mg-based bulk amorphous alloys, RQ12, 0, 0, - (0000)
  • Design of high performance structural alloys using second phases, RQ12, 0, 0, - (0000)
  • Effect of nano-particles on the creep resistance Mg alloys, RQ12, 0, 0, - (0000)
  • Effects of strain on the crystallization kinetics of Mg-Cu-(Y, Gd) bulk amorphous alloys, RQ12, 0, 0, - (0000)
  • Fracture behavior of strip-cast bulk amorphous matrix composites containing various crystalline particles, RQ12, 0, 0, - (0000)
  • Microstructural evolution in strip cast Mg-Zn-Mn-Al Alloys, RQ12, 0, 0, - (0000)
  • Optimization of alloy compositions for improved glass forming ability by thermodynamic approach, RQ12, 0, 0, - (0000)
  • Continuous Fabrication of Bulk Amorphous Alloy Sheets by Strip Casting, EUROMAT 2005, 0, 0, - (0000)
  • Twin-roll strip casting-novel method of fabricating wrought Mg alloys, 1st Asian Symposium on Magnesium Alloys, Jeju, Korea, 0, 0, - (0000)
  • 액상함침법을 이용한 텅스텐/비정질합금기지 복합재료의 제조 및 특성, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • Effect of Processing Parameters on Microstructure and Properties of Ultra High Strength Linepipe Steel, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • Continuous Fabrication of Bulk Amorphous Alloy Sheet by Twin-Roll Strip Casting, Japan-Korea Workshop on Metallic Glasses, 0, 0, - (0000)
  • Effect on 2nd phases on the strength and formability of twin-roll strip cast Mg-Zn-X alloys, TMS2006, 0, 0, - (0000)
  • Fabrication of amorphous alloy surface composites by high-energy electron-beam irradiation, TMS2006, 0, 0, - (0000)
  • Friction-stir and surface-friction welding of twin-roll strip cast Mg alloy sheets, TMS2006, 0, 0, - (0000)
  • Improvement in creep resistance of Mg-Sn based alloys by microstructural modification, TMS2006, 0, 0, - (0000)
  • Solidification behavior of Fe-base amorphous alloys during twin-roll strip casting, TMS2006, 0, 0, - (0000)
  • 박판주조된 마그네슘 합금 판재의 마찰교반용접과 표면마찰용접, 대한금속재료학회 춘계학술대회, 0, 0, - (0000)
  • 스트립 캐스팅을 통한 Fe계 비정질 합금 판재의 제조, 대한금속재료학회 춘계학술대회, 0, 0, - (0000)
  • Zr계 비정질 합금 및 복합재료의 준정적 및 동적 변형과 파괴거동 연구, 대한금속재료학회 춘계학술대회, 0, 0, - (0000)
  • Effect of Alloying Elements on the Microstructure and Mechanical Properties of Mg-Sn based Cast Alloys, ICM2006, 0, 0, - (0000)
  • Friction-Stir Welding and Surface-Friction Welding of Twin-Roll Strip Cast Mg-Zn-Mn-Al Alloy, ICM2006, 0, 0, - (0000)
  • Microstructure and Properties of Twin-Roll Strip Cast Mg Alloys, ICM2006, 0, 0, - (0000)
  • Correlation of Microstructure with Hardness and Corrosion Resistance of Surface Alloyed Materials Fabricated with Fe-based Metamorphic Powders by Accelerated Electron Beam Irradiation Method, THERMEC2006, 0, 0, - (0000)
  • Effect of Second Phase on Mechanical Properties of Bainite-Base Steels, THERMEC2006, 0, 0, - (0000)
  • Friction-Stir Welding and Surface-Friction Welding of Twin-Roll Strip Cast ZMA611 Mg Alloy, THERMEC2006, 0, 0, - (0000)
  • Microstructure and Mechanical Properties of Twin-Roll Strip Cast Mg Alloys, THERMEC2006, 0, 0, - (0000)
  • Solidification Behavior of Fe-base Amorphous Alloys During Twin-Roll Strip Casting, THERMEC2006, 0, 0, - (0000)
  • Design of Advanced structural Alloys Using Second Phases, Joint Symposium on Materials Science and Engineering for the 21st Century, 0, 0, - (0000)
  • Effect of Alloying Elements on the Crystallization Kinetics of Mg-Cu-(Y,Gd) Bulk Amorphous Alloys, Joint Symposium on Materials Science and Engineering for the 21st Century, 0, 0, - (0000)
  • Development of High Performance Alloy Sheets by Twin-roll Strip Casting, UKC 2006, 0, 0, - (0000)
  • Tailoring the Microstructure for Optimum Properties by the Use of Constitutive Equations, ICASS 2006, 0, 0, - (0000)
  • Effects of Alloying Elements on the Crystallization Kinetics and Glass Forming Ability of Fe-Zr-B Alloy System, BMG5, 0, 0, - (0000)
  • Mechanical Properties of Iron-base Amorphous Alloy Sheets Fabricated by Twin-Roll Strip Casting, BMG5, 0, 0, - (0000)
  • Revisit of Work Hardening Behavior in a Bulk Amorphous Matrix Composite, BMG5, 0, 0, - (0000)
  • 베이나이트 기지를 가지는 HSLA 강의 물성에 미치는 이차상의 영향, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • Mg-Sn계 고온용 마그네슘 합금의 미세조직 및 기계적 특성에 미치는 합금원소 첨가의 영향, 대한금속재료학회 추계학술대회, 0, 0, - (0000)
  • Effect of Alloying Elements on the Microstructural Evolution of Mg-Sn Based Cast Alloys, ICSSP3, 0, 0, - (0000)
  • Microstructural Evolution in Twin-Roll Strip Cast Mg Alloys, ICSSP3, 0, 0, - (0000)
  • Dynamic Compressive Deformation Behavior of Zr-Based Amorphous Alloy and Composite, TMS2007, 0, 0, - (0000)
  • Superplastic Deformation of Warm-Rolled 6013 Al Alloy, TMS2007, 0, 0, - (0000)
  • Dynamic Deformation and FractureBehavior of Zr-Based Bulk Metallic Glasses, , 0, 0, - (0000)
  • Microfracture Observation of Zr-Based Bulk Metallic Glasses, ICM10, 0, 0, - (0000)
  • Wear Resistance of Plasma-Sprayed Al2O3-TiO2 Nanocoatings, ICM10, 0, 0, - (0000)
  • 금속계 연속섬강화 Mg 계 비정질 복합재료의 조직제어 및 물성향상을 위한 열역학적 접근, 대한금속재료학회 춘계학술대회, 0, 0, - (0000)
  • 박판주조로 제조된 고강도 마그네슘합금 판재의 인장특성 및 고온변형거동, 대한금속재료학회 춘계학술대회, 0, 0, - (0000)
  • Iridium계 합금의 산화 거동에 관한 연구, 대한금속재료학회 춘계학술대회, 0, 0, - (0000)
  • Microstructure and Mechanical Properties of Twin-Roll Strip Cast Mg Alloys, , 0, 0, - (0000)
  • Microstructure design of Mg alloys, Plasticity 2007, 0, 0, - (0000)
  • Glass forming ability and mechanical properties of metal-fiber-reinforced Zr-based amorphous composites designed by thermodynamic approach, 14th International Symposium on Metastable and Nano-Materials, 0, 0, - (0000)
  • Microstructure and Mechanical Properties of Metal-Fiber-Reinforced Zr-Ti-Cu-Ni-Be Amorphous Composites Fabricated by Liquid Pressing Process, 14th International Symposium on Metastable and Nano-Materials, 0, 0, - (0000)
  • Twin-roll casting of Mg alloys, Light Metals Technology Conference 2007, 0, 0, - (0000)
  • Effect of Ca addition on microstructure and mechanical properties of twin-roll strip cast AZ31 Mg alloy, 2nd Asian Symposium on Magnesium Alloys, 0, 0, - (0000)
  • Effect of Sb and Sr additions of the microstructural evolution of Mg-Sn-Al-Si based alloys, 2nd Asian Symposium on Magnesium Alloys, 0, 0, - (0000)
  • Mechanical properties and microstructure of twin-roll cast Mg-Zn-Y Alloys, 2nd Asian Symposium on Magnesium Alloys, 0, 0, - (0000)
  • Microstructural evolution of Mg-Al-Zn-Mn alloys during accumulative roll-bonding, 2nd Asian Symposium on Magnesium Alloys, 0, 0, - (0000)
  • Microstructure and mechanical properties of twin-roll strip cast Mg alloys, 2nd Asian Symposium on Magnesium Alloys, 0, 0, - (0000)
  • Texture evolution of a twin-roll strip cast magnesium alloy during warm-rolling, 2nd Asian Symposium on Magnesium Alloys, 0, 0, - (0000)
  • Microstructural evolution in twin-roll strip cast Mg alloys, Joint Symposium on Materials Science and Engineering for the 21st Century, 0, 0, - (0000)
  • Microstructure and mechanical properties of twin-roll cast Mg alloys, Australia-Korea Workshop on Light Alloys (AKLA-07), 0, 0, - (0000)
  • Oxidation behavior of Iridium base alloys, The Sixth Pacific Rim International Conference on Advanced Materials and Processing, 0, 0, - (0000)
  • Synthesis of Zr-based Glassy Alloy Foams, The Sixth Pacific Rim International Conference on Advanced Materials and Processing, 0, 0, - (0000)
  • Microstructure and Mechanical Properties of Twin-Roll Strip Cast Mg Alloys, 11th China-Korea Workshop on Advanced Materials - Light Metal Materials, 0, 0, - (0000)

단행본

  • Advanced Materials and processing, Materials Science Forum, , 김낙준 (2007)
  • Mechanical Behavior of Materials, Key Engineering Materials, , 김낙준 (2007)
  • Designing with Al Alloys, Marcel Dekker Inc., , 김낙준 (2004)
  • 'Designing with Aluminum Alloys' in Handbook of Mechanical Alloy Design, MARCEL DEKKER, INC., 46, 김낙준 (2004)
  • Light Weight Alloys of Aerospace Applications VI, TMS, , 김낙준 (2001)
  • Light Materials for Transportation Systems, CAAM, POSTECH, Pohang, Korea, , 김낙준 (2001)
  • The 2nd Joint Australia-Korea Workshop on Light Alloys, CAAM, POSTECH, , 김낙준 (2000)
  • Light Weight Alloys of Aerospace Applications Ⅳ, Minerals, Metals, & Materials Society, 491, 김낙준 (1997)
  • Powder Injection Molding, CAAM, , 김낙준 (1997)
  • 개선된 PM 공정 Ⅱ, CAAM, , 김낙준 (1997)
  • CAAM-ARL 첨단재료 공동 워크샵, CAAM, , 김낙준 (1997)
  • 항공재료연구센터 연구결과 발표집, CAAM, , 김낙준 (1997)
  • Joint Australia-Korea Workshop on Light Alloys, University of Queensland, , 김낙준 (1997)
  • CAAM-ARL Joint Workshop on Advanced Materials, CAAM, , 김낙준 (1997)
  • 감마 TiAl 합금에 관한 워크샵, CAAM, , 김낙준 (1996)
  • 일본에서의 발주기 개발, CAAM, , 김낙준 (1996)
  • 항공재료연구센터 연구결과 발표집, CAAM, , 김낙준 (1996)
  • 투과전자현미경 분석학, 청문각, , 김낙준 (1996)
  • Advanced PM Processing II, CAAM, 371, 김낙준 (1996)
  • 수송기관을 위한 경량 재료, CAAM, POSTECH, Pohang, Korea, , 김낙준 (1993)
  • Light-Weight Alloys for Aerospace Applications II, Warrendale, Pa, 506, 김낙준 (1991)
  • Light Weight Alloys for Aerospace Applications III, TMS-AIME, Warrendale, , 김낙준 (1991)
  • Light-Weight Alloys for Aerospace Applications, Warrendale, pa, 508, 김낙준 (1989)

연구실적

  • 2000년도 항공재료연구센터 이자금액(20000301-20010228), 한국과학기술원 (2000-2002)
  • 2001년도 항공재료연구센터 간접비(센터운영비+대학O/H), 한국과학기술원 (2001-2002)
  • 2001년 항공재료연구센터 이월금 예산, 한국과학기술원 (2001-2002)
  • 2001년 항공재료연구센터 예금이자 (20010301-20020228), 한국과학기술원 (2001-2003)
  • 분산강화형 AL합금의 IN-SITU 제조공정 연구, 한국과학기술원 (2001-2002)
  • EPM TI-46.6A I-1, 4MN-2MO 합금의 응용특성 개선, 한국과학기술원 (2001-2002)
  • 고강도 AL 합금 접합용 필러합금의 제조 및 진공 BRAZING 공정기술 개발, 한국과학기술원 (2001-2002)
  • THE EFFECT OF HIPED POROSITY ON THE MECHANICAL AND, 한국과학기술원 (2001-2002)
  • 나노압입된 재료의 미세조직 관찰 (해외현지LAB. - MIT), 한국과학기술원 (2001-2002)
  • 2002년도 항공재료연구센터 간접비(센터운영비+대학O/H), 한국과학기술원 (2002-2003)
  • 2002년 항공재료연구센터 이월금 예산, 한국과학기술원 (2002-2003)
  • 2002년 항공재료연구센터 예금이자 (20020301-20030228), 한국과학기술원 (2002-2003)
  • 분산강화형 AL 합금의 신제조공정 연구, 한국과학기술원 (2002-2003)
  • TIAL 금속간화합물의 응용 특성 개선, 한국과학기술원 (2002-2003)
  • 고강도 AL합금의 진공BRAZING 기술 개발, 한국과학기술원 (2002-2003)
  • THE EFFECT OF HIPED POROSITY ON THE MECHANICAL AND, 한국과학기술원 (2002-2003)
  • 나노압입된 재료의 미세조직 관찰 II, 한국과학기술원 (2002-2003)
  • LIMAT 2003 CONFERENCE, 포항공과대학교 (2003-2004)
  • THE EFFECT OF HIPED POROSITY ON THE MECHANICAL AND, 포항공과대학교 (2000-2001)
  • THE EFFECT OF H1PED POROSITY ON THE MECHANICAL AND, 포항공과대학교 (2001-2002)
  • 고강도 합금 주조품의 미세조직 규명, 한양대학교 (2000-2001)
  • 고강도 합금 주조품의 미세조직 규명, 한양대학교 (2001-2002)
  • 고강도 합금 주조부품 개발(1/2년차), 한양대학교 (2002-2003)
  • 고강도 고인성 내크리프 마그네슘 합금 개발, 한양대학교 (2000-2001)
  • 고강도.고인성 내크레프 마그네슘 합금 개발, 한양대학교 (2001-2002)
  • 비정질ZR계 합금판재의 STRIP CASTING기술개발, 한양대학교 (2001-2002)
  • STRIP CASTING을 이용한 고강도 MG합금 판재 개발, 한양대학교 (2001-2002)
  • 비평형상 재료 성형기술개발, 한양대학교 (2002-2003)
  • STRIP CASTING을 이용한 고강도 MG합금 판재 개발, 국방과학연구소 (2002-2003)
  • 석도제품의 가공성에 미치는 조질압하율별 재질의 영향 연구, (주)포스코 (2000-2002)
  • 고인성,저항복비 열연강판 제조기구 규명 및 신프로세스 개발, (주)포스코 (2001-2002)
  • 침상형 LINE-PIPE강에 있어서 조직과 물성의 체계적 연구, (주)포스코 (2002-2003)
  • 합금성분과 오스테나이트 조직에 따른 경화능 변화 거동 규명, (주)포스코 (2002-2002)
  • SPRAY FORMING에 의한 고속도강 발렛 제조기술 개발, (재)포항산업과학연구원 (2000-2001)
  • 후판 고강도 LINE-PIPE용강 합금원소별 가공조건에 따른 물성치 평가, (주)포스코 (2001-2003)
  • 박판주조법에 의한 비평형합금 판재개발, 한국과학기술기획평가원 (2003-2004)
  • 비평형상 재료 성형기술개발, 차세대소재성형기술개발사업단 (2003-2004)
  • STRIP CASTING을 이용한 고강도 MG합금 판재 개발, 한국과학기술연구원 (2003-2004)
  • 자동차 경량화를 위한 비평형 합금소재 기술, 과학기술부 (2004-2005)
  • 박판주조법에 의한 비평형합금 판재 개발, 한국과학기술기획평가원 (2004-2005)
  • 비평상형 재료 스트립 캐스팅 기술 개발, 차세대소재성형기술개발사업단 (2004-2005)
  • (전사)STRIP CASTING용 고강도 MG 판재 합금개발, (주)포스코 (2005-2006)
  • X80급 침상형 라인파이프강에 있어서 조직과 물성의 체계적 연구, (주)포스코 (2003-2004)
  • SUPER X80 라인파이프강의 미세조직과 기계적 성질 상관성 연구, (주)포스코 (2004-2005)
  • 분말사출성형에 의한 정밀 기계부품 제조기술 개발, (재)포항산업과학연구원 (2003-2004)
  • 비평형상 재료 스트립 캐스팅 기술개발, 차세대소재성형기술개발사업단 (2005-2006)
  • 박판주조법에 의한 비평형합금 판재 개발, 한국과학재단 (2005-2006)
  • S_직접비_김낙준, 포항공과대학교 (2003-2019)
  • 인건비풀링과제, 포항공과대학교 (2006-2015)
  • 자체연구개발과제, 포항공과대학교 (2006-2016)
  • (광양) 열간압연 및 냉각조건이 복합조직강의 미세조직과 기계적성질에 미치는 영향, (주)포스코 (2005-2006)
  • EFFECT OF MICROSTRUCTURE ON THE DEFORMATION BEHAVI, 기타기관 (2007-2009)
  • 비정질 합금 개발, 영동공업(주) (2006-2008)
  • (전사)고급 API강의 고장력 및 고인성화 기구 고찰, (주)포스코 (2006-2007)
  • (광양) 열연 저원가 API-X70강의 기계적 성질에 미치는 열간압연 공정의 영향 해석, (주)포스코 (2007-2007)
  • 비평형상 재료 스트립 캐스팅 기술 개발, 차세대소재성형기술개발사업단 (2006-2007)
  • 박판주조법에 의한 비평형합금 판재 개발, 한국과학재단 (2006-2007)
  • 5NS05055 이월과제, 한국과학재단 (2006-2007)
  • (전사) STRIP CASTING용 고강도 MG 판재 합금 개발, (주)포스코 (2006-2007)
  • 고강도 라인파이프강에서의 열처리 조건에 따른 E-CU 석출거동 연구, 포항공과대학교 (2006-2007)
  • 열연 API-X70강의 기계적 성질에 미치는 미세석출상의 영향, 포항공과대학교 산학협력단 (2007-2007)
  • 고효율 고성형성 합금 판재 제조기술 개발, 한국기계연구원부설재료연구소 (2007-2008)
  • 박판주조법에 의한 비평형합금 판재 개발, 한국과학재단 (2007-2008)
  • 한호 경량재료 워크샾, 한국과학재단 (2007-2007)
  • (전사) STRIP CASTING용 고강도 MG 판재 합금 개발(3), (주)포스코 (2007-2008)
  • STRIP CASTING용 고강도 MG 판재합금 개발, 포항공과대학교 산학협력단 (2007-2008)
  • 우수한 상온성형성을 가지는 MG 합금 판재의 개발, 포항공과대학교 (2008-2008)
  • 고효율 고성형성 합금 판재 제조기술 개발, 한국기계연구원부설재료연구소 (2008-2009)
  • 고 MN강 후판의 가공경화기구 해석 및 항복강도 향상기술, 포항공과대학교 산학협력단 (2008-2009)
  • (광양) 자동차용 경량철강소재의 특성 분석 및 변형기구 해석, (주)포스코 (2008-2009)
  • 경량철강소재의 특성 분석 및 변형기구 해석, 포항공과대학교 산학협력단 (2008-2009)
  • 마그네슘 합금의 내산화성 및 기계적 물성에 미치는 미세조직 영향 분석, 한국기계연구원부설재료연구소 (2009-2009)
  • 고효율 고성형성 합금 판재 제조기술 개발, 한국기계연구원부설재료연구소 (2009-2010)
  • (전사) 고 MN강의 입실런 마르텐사이트 형성기구 및 가공유기변태 연구, (주)포스코 (2009-2010)
  • METALLURGY OF HIGH MANGANESE STEELS, ExxonMobil Research & Engineering (2009-2009)
  • 고 MN강의 입실런 마르텐사이트 형성기구 및 가공유기변태 연구, 포항공과대학교 산학협력단 (2009-2010)
  • (광양) 자동차용 경량철강소재의 특성 분석 및 변형기구 해석, (주)포스코 (2009-2010)
  • [UI]자동차용 경량철강소재의 특성 분석 및 변형기구 해석, 포항공과대학교 산학협력단 (2009-2010)
  • VACCUM INDUCTION MELTING, INGOT CASTIONG AND TMCP ROLLING OF X80 GRADE PLATES, ExxonMobil Research & Engineering (2009-2010)
  • 2010년 철강혁신프로그램 부서운영비, 포항공대산학협력단 (2010-2011)
  • METALLURGY OF HIGH MANGANESE STEELS, ExxonMobil Research & Engineering (2010-2010)
  • 마그네슘 합금의 내산화성 및 기계적 물성에 미치는 미세조직 영향 분석, 한국기계연구원부설재료연구소 (2010-2010)
  • 고효율 고성형성 마그네슘 합금 판재 제조기술 개발, 한국기계연구원부설재료연구소 (2010-2011)
  • 고기능 MG 판재 소재 개발, (주)포스코 (2010-2011)
  • 고기능 MG 판재 소재 개발, (주)포스코 (2011-2012)
  • (학생)인건비풀링과제, 포항공대산학협력단 (2011-2020)
  • METALLURGY OF HIGH MANGANESE STEELS, ExxonMobil Research & Engineering (2011-2012)
  • LEAN DUPLEX STS강의 STRIP CASTING시 미세조직 거동 해석, (주)포스코 (2011-2012)
  • 2011년 철강혁신프로그램 부서운영비 2(추가증액분), 포항공대산학협력단 (2012-2012)
  • FE-AL계 고비강도 강판 개발, (주)포스코 (2012-2013)
  • 고기능 MG 판재 소재 개발, (주)포스코 (2012-2013)
  • 극저온용 MN강의 고인성화 연구, (주)포스코 (2012-2013)
  • 오스테나이트계 고망간강의 극저온 변형기구 연구, (주)포스코 (2012-2013)
  • ULTRAFINE-GRAINED TI64 AND ULTRA HIGH-STRENGTH STEEL TECHNOLOGY, The Boeing Company (2012-2013)
  • POSSD 강의 소성 변형 이방성 개선, (주)포스코 (2013-2013)
  • STRAIN-INDUCED PHASE TRANSFORMATION AND NANOCRYSTALLIZATION OF HIGH MN STEELS, ExxonMobil Research & Engineering (2012-2013)
  • 고AL 초경량강 개발(DEVELOPMENT OF HIGH-AL ULTRA LIGHTWEIGHT STEELS(HAUS)), (주)포스코 (2013-2014)
  • 고기능 MG 판재 소재 개발, (주)포스코 (2013-2014)
  • 오스테나이트계 고망간강의 극저온 변형기구 연구, (주)포스코 (2013-2014)
  • 극저온용 MN강의 고인성화 연구, (주)포스코 (2013-2014)
  • ULTRAFINE-GRAINED TI64 AND ULTRA HIGH-STRENGTH STEELS TECHNOLOGY, 보잉사 (2013-2013)
  • S_간접비_김낙준, 포항공과대학교 (2013-2019)
  • DEVELOPMENT AND FABRICATION OF ULTRA-HIGH-STRENGTH STEELS, The Boeing Company (2013-2013)
  • MECHANICAL PROPERTIES AND DEFORMATION MECHANISM OF NANOCRYSTALLINE HIGH MN STEELS, ExxonMobil Research & Engineering (2013-2014)
  • 고AL 초경량강 개발(DEVELOPMENT OF HIGH-AL ULTRA LIGHTWEIGHT STEELS(HAUS)), (주)포스코 (2014-2015)
  • 마르텐사이트계 고MN 내마모강의 고경도 및 고인성화 기구 연구, (주)포스코 (2014-2015)
  • DEVELOPMENT OF HIGH AL ULTRA-LIGHTWEIGHT STEELS, 포항공대산학협력단 (2014-2015)
  • 오스테나이트계 고망간강의 극저온 변형기구 연구, (주)포스코 (2014-2015)
  • 고기능 MG 판재 소재 개발, (주)포스코 (2014-2015)
  • DEVELOPMENT AND OPTIMIZATION OF ULTRA-HIGH STRENGTH STAINLESS STEELS, The Boeing Company (2014-2014)
  • DEVELOPMENT OF HIGH AL ULTRA-LIGHTWEIGHT STEELS, 포항공대산학협력단 (2015-2016)
  • 전사) 마르텐사이트계 고MN 내마모강의 고경도 및 고인성화 기구 연구 (2 / 2), (주)포스코 (2015-2016)
  • 전사) 고AL 초경량강 개발(DEVELOPMENT OF HIGH-AL ULTRA LIGHTWEIGHT STEELS(HAUS)) (3 / 3, (주)포스코 (2015-2016)
  • FURTHER DEVELOPMENT, OPTIMIZATION, AND SCALE-UP PLAN OF ULTRA-HIGH STRENGTH [UHS] STAINLESS STEELS, The Boeing Company (2015-2016)
  • 고기능 MG 판재 소재 개발, (주)포스코 (2015-2016)
  • 자체연구개발과제[2015년 신설], 포항공과대학교 (2015-2018)
  • DEVELOPMENT OF HIGH AL ULTRA-LIGHTWEIGHT STEELS, 포항공대산학협력단 (2015-2016)
  • SUB-ZERO HARDENING 고강도강 개발 (미래혁신과제 FEASIBILITY STUDY), (주)포스코 (2015-2016)
  • DEFORMATION BEHAVIOR AND MICROSTRUCTURAL EVOLUTION OF NANOCRYSTALLINE HIGH MN STEELS UNDER HIGH STRAIN RATE DEFORMATION, ExxonMobil Research & Engineering (2015-2016)
  • 고경도내마모강의 MN양에 따른 입계취성 기구 규명, (주)포스코 (2016-2017)
  • [기술개발비과제]DEVELOPMENT OF SUB-ZERO HARDENING FOR HIGH-STRENGTH STEEL, 포항공대산학협력단 (2016-2017)
  • ALLOY DESIGN AND DEVELOPMENT OF HIGH SPECIFIC STRENGTH STAINLESS STEELS ALLOYS, The Boeing Company (2016-2016)
  • 고강도 고성형성 MG합금 판재소재 개발, (주)포스코 (2016-2017)
  • SUB-ZERO HARDENING 고강도강 개발 (미래혁신과제), (주)포스코 (2016-2017)
  • EFFECTS OF MICROSTRUCTURE ON STRAIN-INDUCED NANOCRYSTALLIZATION IN HIGH MN STEELS AND ITS WELDMENTS UNDER HIGH STRAIN RATE DEFORMATION, ExxonMobil Research & Engineering (2016-2017)
  • EFFECT OF MICROSTRUCTURE AND ALLOYING ON MECHANICAL PROPERTIES IN HIGH MANGANESE STEELS, ExxonMobil Research & Engineering (2016-2018)
  • BCA강 개발/성능 향상을 위한 취성균열 전파/정지 메커니즘 규명, (주)포스코 (2017-2018)
  • [기술개발비]BCA강 개발/성능 향상을 위한 취성균열 전파/정지 메커니즘 규명, 포항공대산학협력단 (2017-2018)
  • CHARACTERIZATION OF DEFORMATION MECHANISM IN FE-MN BASED SHAPE MEMORY ALLOYS UNDER THERMO-MECHANICAL LOADING, ExxonMobil Research & Engineering (2017-2018)
  • SUB-ZERO HARDENING 고강도강 개발 (미래혁신과제), (주)포스코 (2018-2019)
  • MG합금의 성형성 극대화를 위한 조성/가공열처리 최적조건 도출, (주)포스코 (2018-2018)
  • BCA강 개발/성능 향상을 위한 취성균열 전파/정지 메커니즘 규명, (주)포스코 (2018-2019)

IP

  • 김낙준,이성학,김기종,유연주, 도어개폐용 마그네트 조립체, 한국, 1996-024921 (DG19)
  • 김낙준,이성학,김기종,유연주, 도어개폐용 마그네트 조립체, 한국, 1996-024921 (DG19)
  • 김낙준,김한수,ZargaranAlireza,손창영,구민서, 고강도 고연성 페라이트계 경량 강판 및 그 제조방법, 한국, 10-2015-0094345 (2014)
  • 김낙준,허윤욱,구진모,이재상,김한수,김상헌, 고비강도 저비중 강판과 그 제조 방법, -, KR2013/012163 (2014)
  • 김낙준,김한수,김상헌,이재상,허윤욱,구진모, 고강도 저비중 강판 및 그 제조방법, 한국, 10-2013-0163532 (2013)
  • 김낙준,서병찬,김동욱,배준호,심명식, 편석 현상을 최소화 한 상온 성형성이 우수한 박판주조로 제조된 비열처리형 마그네슘 합금 판재, 중국, 201280040577.4 (2013)
  • 김낙준,서병찬,김동욱,배준호,심명식, 편석 현상을 최소화한 상온 성형성이 우수한 비열처리형 마그네슘 합금 판재, 일본, 2014-536978 (2013)
  • 김낙준,서병찬,김동욱,배준호,심명식, 편석 현상을 최소화한 상온 성형성이 우수한 비열처리형 마그네슘 합금 판재, 일본, 미정 (2013)
  • 김낙준,서병찬,김동욱,배준호,심명식, 편석 현상을 최소화한 상온 성형성이 우수한 비열처리형 마그네슘 합금 판재, USA, 14/237,892 (2013)
  • 김낙준,서병찬,김동욱,배준호,심명식, 편석 현상을 최소화한 상온 성형성이 우수한 비열처리형 마그네슘 합금 판재, EP, 12841026.3 (2013)
  • 김낙준,김동욱,김도향,배준호, 상온성형성이 우수한 마그네슘 합금 판재 및 그 제조방법, EP, 11843068.5 (2013)
  • 성진경,김낙준,이재상,심병열,최국선,구양모,권세균,허윤욱,진원,김장규,왕덕현, Fe-Co계 합금 판재의 집합조직 형성 방법 및 이를 이용하여 제조된 연자성 강판, -, PCT/KR2013/0004 (2013)
  • 김낙준,서병찬,김동욱,배준호,심명식, 편석 현상을 최소화 한 상온 성형성이 우수한 박판주조로 제조된 비열처리형 마그네슘 합금 판재, -, PCT/KR2012/0083 (2012)
  • 김낙준,김동욱,김도향,배준호, 상온성형성이 우수한 마그네슘 합금 판재 및 그 제조방법, -, PCT/KR2011/0089 (2011)
  • 김낙준,김동욱,김도향,배준호, 상온성형성이 우수한 마그네슘 합금 판재 및 그 제조방법, PCT, PCT/KR2011/0089 (2011)
  • 성진경,김낙준,구양모,이재상,권세균,허윤욱,김장규,진원,최국선,심병열,왕덕현, Fe-Co계 합금 판재의 집합조직 형성 방법 및 이를 이용하여 제조된 연자성 강판, 한국, 10-2012-0017872 (2011)
  • 김낙준,성진경,구양모,이재상,권세균,허윤욱,김장규,진원,최국선,심병열,왕덕현, Fe-Co계 합금 판재의 집합조직 형성 방법 및 이를 이용하여 제조된 연자성 강판, 한국, 10-2012-0017872 (2011)
  • 이성학,김충년,김낙준,오윤석, 상온 인장 연신을 보이는 비정질 복합재료와 그 제조방법, -, PCT/KR2011/0087 (2011)
  • 이성학,김충년,김낙준,오윤석, 상온 인장 연신을 보이는 비정질 복합재료와 그 제조방법, PCT, PCT/KR2011/0087 (2011)
  • 김낙준,배준호,김동욱,서병찬,심명식, 편석 현상을 최소화 한 상온 성형성이 우수한 박판주조로 제조된 비열처리형 마그네슘 합금 판재, 한국, 10-2011-0107405 (2011)
  • 김낙준,배준호,김동욱,서병찬,심명식, 편석 현상을 최소화 한 상온 성형성이 우수한 박판주조로 제조된 비열처리형 마그네슘 합금 판재, 한국, 10-2011-0107405 (2011)
  • 김낙준,김동욱,배준호,김도향, 상온성형성이 우수한 마그네슘 합금 판재 및 그 제조방법, 한국, 10-2010-0116975 (2010)
  • 김낙준,김동욱,배준호,김도향, 상온성형성이 우수한 마그네슘 합금 판재 및 그 제조방법, 한국, 10-2010-0116975 (2010)
  • 김낙준,배준호,차미니 멘디스,카주히로 호노, 고강도 고성형성 마그네슘 합금 판재 및 그 제조방법, 한국, 10-2010-0111072 (2010)
  • 김낙준,배준호,차미니 멘디스,카주히로 호노, 고강도 고성형성 마그네슘 합금 판재 및 그 제조방법, 한국, 10-2010-0111072 (2010)
  • 이성학,오윤석,김낙준,김충년, 상온 인장 연신을 보이는 비정질 복합재료와 그 제조방법, 한국, 10-2010-0114949 (2009)
  • 이성학,오윤석,김낙준,김충년, 상온 인장 연신을 보이는 비정질 복합재료와 그 제조방법, 한국, 10-2010-0114949 (2009)
  • 윤태식,김창규,손창영,하대진,이성학,김낙준, 금속사출성형법을 이용한 합금 부품의 제조방법 및 합금부품, -, 077086790.0 (2009)
  • 윤태식,김창규,손창영,하대진,이성학,김낙준, 금속사출성형법을 이용한 합금 부품의 제조방법 및 합금부품, EP, 077086790.0 (2009)
  • 윤태식,김창규,손창영,하대진,이성학,김낙준, 금속사출성형법을 이용한 합금 부품의 제조방법 및 합금부품, 일본, 2009-517946 (2008)
  • , 금속사출성형법을 이용한 합금 부품의 제조방법 및 합금부품, USA, 12/306,778 (2008)
  • 이성학,윤태식,김창규,손창영,하대진,김낙준, 금속사출성형법을 이용한 합금 부품의 제조방법 및 합금부품, 중국, 200780024689.X (2008)
  • 윤태식,김창규,손창영,하대진,이성학,김낙준, 금속사출성형법을 이용한 합금 부품의 제조방법 및 합금부품, 중국, 200780024689.X (2008)
  • 김낙준,배준호,배근태,김경훈,A.K.PrasadaRao, 알루미늄 시트가 클래딩된 마그네슘 합금 판재의 제조방법 및 이에 의해 제조된 마그네슘 합금 판재, PCT, PCT/KR2008/0073 (2008)
  • 김낙준,배준호,배근태,김경훈,A.K.PrasadaRao, 알루미늄 시트가 클래딩된 마그네슘 합금 판재의 제조방법 및 이에 의해 제조된 마그네슘 합금 판재, -, PCT/KR2008/0073 (2008)
  • 김낙준,배준호,배근태,김경훈,A.K.PrasadaRao, 알루미늄 시트가 클래딩된 마그네슘 합금 판재의 제조방법 및 이에 의해 제조된 마그네슘 합금 판재, -, PCT/KR2008/0073 (2008)
  • 김낙준,김경훈,배근태,배준호,김동욱,강대훈,이정구, 고성형성 마그네슘 합금 판재 및 그 제조방법, PCT, PCT/KR2008/0071 (2008)
  • 김낙준,김경훈,배근태,배준호,김동욱,강대훈,이정구, 고성형성 마그네슘 합금 판재 및 그 제조방법, -, PCT/KR2008/0071 (2008)
  • 김낙준,김경훈,배근태,배준호,김동욱,강대훈,이정구, 고성형성 마그네슘 합금 판재 및 그 제조방법, -, PCT/KR2008/0071 (2008)
  • 김낙준,김경훈,배근태,배준호,김동욱,강대훈,이정구, 고성형성 마그네슘 합금 판재 및 그 제조방법, 한국, 10-2008-0097908 (2008)
  • 김낙준,배근태,김경훈,배준호,강대훈,박우진, 고강도 마그네슘 합금 판재 및 그 제조방법, 한국, 10-2008-0046114 (2008)
  • 김낙준,배근태,김경훈,배준호,강대훈,박우진, 고강도 마그네슘 합금 판재 및 그 제조방법, 한국, 10-2008-0046114 (2008)
  • 김낙준,배근태,배준호,강대훈,김경훈,박우진, 마그네슘 합금판재 및 그 제조방법, 한국, 10-2008-0030066 (2008)
  • 김낙준,배근태,김경훈,배준호,A.K.PrasadaRao, 알루미늄 시트가 클래딩된 마그네슘 합금 판재의 제조방법 및 이에 의해 제조된 마그네슘 합금 판재, 한국, 10-2008-0016927 (2008)
  • 김낙준,배근태,박성수,강대훈,신광선, 고강도 마그네슘 합금 및 그 제조방법, PCT, PCT/KR2008/0007 (2008)
  • 김낙준,배근태,박성수,강대훈,신광선, 고강도 마그네슘 합금 및 그 제조방법, -, PCT/KR2008/0007 (2008)
  • 배근태,김낙준,박성수,강대훈,신광선, 고강도 마그네슘 합금 및 그 제조방법, 한국, 10-2008-0009667 (2008)
  • 김낙준,배근태,박성수,강대훈,신광선, 고강도 마그네슘 합금 및 그 제조방법, 한국, 10-2008-0009667 (2008)
  • 이규홍,이성학,김낙준,이상복,이상관, 비정질 금속기지 복합재 및 이의 제조방법, PCT, PCT/KR2007/0060 (2007)
  • 이규홍,이성학,김낙준,이상복,이상관, 비정질 금속기지 복합재 및 이의 제조방법, -, PCT/KR2007/0060 (2007)
  • 박성수,김낙준,배근태,강대훈, 고강도 고인성 마그네슘 합금, 한국, 10-2007-0051889 (2007)
  • 김낙준,박성수,배근태,강대훈, 고강도 고인성 마그네슘 합금, 한국, 10-2007-0051889 (2007)
  • 윤태식,김창규,손창영,하대진,이성학,김낙준, 금속사출성형법을 이용한 합금 부품의 제조방법 및 합금부품, PCT, PCT/KR2007/0005 (1992)
  • 윤태식,김창규,손창영,하대진,이성학,김낙준, 금속사출성형법을 이용한 합금 부품의 제조방법 및 합금부품, -, PCT/KR2007/0005 (1992)
  • 이성학,김창규,윤태식,손창영,하대진,김낙준, 금속사출성형법을 이용한 합금 부품의 제조방법 및 합금부품, 한국, 10-2006-0058373 (1992)
  • 박영수,김창규,이한상,이동근,박성수,이정규,김낙준,이성학, Method and apparatus for producing amorphous alloy sheet, and amorphous alloy sheet produced using the same, 홍콩, 06104575.9 (1992)
  • 김낙준,박영수,김창규,이한상,이동근,박성수,이정규,이성학, 비정질 합금판재의 제조방법과 그 장치, 및 이를 이용하여 제조된 비정질 합금판재, 홍콩, 06104575.9 (1992)
  • 안지훈,이성학,황병철,송은필,이동근,김낙준, 플라즈마 용사법에 의해 제조된 내마모성이 우수한 Al2O3-TiO2계 코팅층, 한국, 10-2005-0076563 (1992)
  • 김낙준,이정구,박영수,박성수,이동근,이성학, 비정질 합금판재의 제조방법과 그 장치, 및 이를 이용하여 제조된 비정질 합금판재, 중국, 03822834.3 (1992)
  • 이정구,박영수,박성수,이동근,김낙준,이성학, 비정질 합금판재의 제조방법과 그 장치, 및 이를 이용하여 제조된 비정질 합금판재, 중국, 3822834.3 (1992)
  • 김낙준,박영수,김창규,이한상,이정구,이동근,박성수,이성학, 비정질 합금판재의 제조방법과 그 장치, 및 이를 이용하여 제조된 비정질 합금판재, -, 03798588.4 (1992)
  • 박영수,김창규,이한상,이정구,이동근,박성수,김낙준,이성학, Method and apparatus for producing amorphous alloy sheet, and amorphous alloy sheet produced using the same, EP, 03798588.4 (1992)
  • 김낙준,박영수,김창규,이한상,이정구,이동근,박성수,이성학, 비정질 합금판재의 제조방법과 그 장치, 및 이를 이용하여 제조된 비정질 합금판재, EP, 03798588.4 (1992)
  • 김낙준,박영수,김창규,이한상,이정구,이동근,박성수,이성학, 비정질 합금판재의 제조방법과 그 장치, 및 이를 이용하여 제조된 비정질 합금판재, USA, 10/529,291 (1992)
  • 박영수,김창규,이한상,이정구,이동근,박성수,김낙준,이성학, Method and apparatus for producing amorphous alloy sheet, and amorphous alloy sheet produced using the same, USA, 10/529,291 (1992)
  • 김낙준,박영수,김창규,이한상,이정구,이동근,박성수,이성학, 비정질 합금판재의 제조방법과 그 장치, 및 이를 이용하여 제조된 비정질 합금판재, 일본, 2004-539634 (1992)
  • 박영수,김창규,이한상,이정구,이동근,박성수,김낙준,이성학, Method and apparatus for producing amorphous alloy sheet, and amorphous alloy sheet produced using the same, 일본, 2004-539634 (1992)
  • 김낙준,이정구,김창규,이한상,박영수,박성수,이동근,이성학, 비정질 합금 판재의 제조방법 및 그 장치 및 이를 이용하여 제조된 비정질 합금판재, PCT, PCT/KR2003/0019 (1992)
  • 이정구,김창규,이한상,박영수,박성수,이동근,김낙준,이성학, Method and apparatus for producing amorphous alloy sheet, and amorphous alloy sheet produced using the same, -, PCT/KR2003/0019 (1992)
  • 김낙준,이정구,김창규,이한상,박영수,박성수,이동근,이성학, 비정질 합금 판재의 제조방법 및 그 장치 및 이를 이용하여 제조된 비정질 합금판재, -, PCT/KR2003/0019 (1992)
  • 이성학,윤은섭,이규홍,이동근,김낙준, 고에너지 가속전자빔을 이용한 비정질 표면복합재료의 제조방법 및 이로부터 제조된 비정질 표면복합재료, 한국, 10-2004-0008625 (1992)
  • 김낙준,이정구,김창규,이한상,박성수,이동근,이성학, 비정질 합금 판재의 제조방법 및 그 장치, 한국, 10-2003-0067143 (1992)
  • 김낙준,이종상,김용찬,이동근,이성학,안상호, 선택적 내부 산화법을 이용한 분산강화 Cu-알루미나 합금의 제조방법 및 그 제조방법을 이용하여 제조된 Cu-알루미나 합금, 한국, 10-2003-0022216 (1992)
  • 이성학,김용찬,이동근,김낙준,안상호, 금속사출성형을 이용한 티타늄 알루미나이트 금속간화합물 물품의 제조방법, 한국, 10-2002-0083175 (1992)
  • 김낙준,이정구,박영수,박성수, 비결정성 합금판재 제조방법, 한국, 10-2002-0058764 (1992)
  • 김낙준,고향진,오진근,이원철, 다층의 티타늄-알루미나이드 금속간 화합물 판재의 제조방법, 한국, 10-1998-0043157 (1992)
  • 김낙준,고향진,전창일, 과공정 알루미늄 실리콘 합금 및 그 제조방법, 한국, 10-1998-0043156 (1992)
  • 유연주,김기종,김낙준,이성학, 경주마 발주기의 뒷문 잠금장치, 한국, 20-1998-0003203 (1992)
  • 유연주,김기종,김낙준,이성학, 경주마 발주기의 앞문 잠금장치, 한국, 20-1998-0003204 (1992)
  • 이성학,김낙준,김기종,유연주, 마그네트 조립체, 한국, 10-1996-0057687 (1992)
  • 이성학,김낙준,김기종,유연주, 발주문 개폐 제어 장치, 한국, 20-1996-0042152 (1992)
  • 이성학,김낙준,김기종,유연주, 경주마발주기의 앞문짝 개문시의 충격음 방지하는 앞문개방제어장치, 한국, 20-1995-0027840 (1992)
  • 이성학,김낙준,김기종,유연주, 경마용 발주기의 앞문을 개방하는 무선 조정장치, 한국, 10-1996-0001489 (1992)
  • 이성학,김낙준,김기종,유연주, 경주마용 발주기의 발마실 칸막이부재에 착설된충격흡수장치, 한국, 20-1996-0000954 (1992)
  • 이성학,김낙준,김기종,유연주, 경주마발주기의 이동용 바퀴, 한국, 20-1996-0000955 (1992)
  • 김낙준,박원욱,류봉선,김하식, 비열처리형 고규소 Al 합금 및 이의 제조 방법, 한국, 10-1995-0015154 (1992)