교원프로필

박성진 사진
교원에 대한 정보를 나타내는 표입니다.
성명 박성진
소속 기계공학과
전화번호 279-2182
E-mail sjpark87@postech.ac.kr
Homepage http://m3s.postech.ac.kr/

학력

  • 1993.03 ~ 1996.02 포항공과대학교 (박사-고체역학(Bio-Inspired Design))
  • 1991.03 ~ 1993.02 포항공과대학교 (석사-기계공학)
  • 1987.03 ~ 1991.02 포항공과대학교 (학사-기계공학)

주요경력

  • 2005.11 ~ 2009.06 : 미시시피주립대
  • 2001.12 ~ 2005.10 : 펜실베니아주립대
  • 2001.08 ~ 2009.06 : (주)세타덱
  • 2000.05 ~ 2001.07 : 델레포스(주)
  • 1996.11 ~ 2000.04 : LG전자
  • 1996.03 ~ 1996.10 : 포항공과대학교 기계공학과

전문분야

학술지

국제전문학술지

  • Thermal decomposition behavior of nano/micro bimodal feedstock with different solids loading, METALS AND MATERIALS INTERNATIONAL, , 24, 142-148 (2018)
  • Effect of binder composition on rheological behavior of PMN-PZT ceramic feedstock, POWDER TECHNOLOGY, , 330, 19-26 (2018)
  • Modeling of magnetic particle orientation in magnetic powder injection molding, JOURNAL OF PHYSICS D-APPLIED PHYSICS, , 51, 115002- (2018)
  • An Experimental Approach to Powder-Binder Separation of feedstock, Powder technology, , 306, 34-44 (2017)
  • Investigation of Particle Size Effects on Sintering of Powder Injection Molding 17-4PH Stainless steel, Powder metallurgy, , 60, 139-148 (2017)
  • Rheological and thermal debinding properties of blended elemental Ti-6Al-4V powder injection molding feedstock, Powder Technology, , , - (2017)
  • Investigation of powder size effects on sintering of powder injection moulded 17-4PH stainless steel, Powder Metallurgy, , 60, 139-148 (2017)
  • Variational Approach to Powder-Binder Separation in Poiseuille and Couette Flows, Physics of Fluids, , 29, - (2017)
  • Powder injection molding of PNN-PMN-PZN doped low temperature sintering PZT ceramics, Journal of Manufacturing Processes, , 28, 235-242 (2017)
  • Image processing-based analysis of interfacial phases in brazed stainless steel with Ni-based filler metal, MATERIALS CHARACTERIZATION, , 130, 278-284 (2017)
  • Analysis of compaction and sintering behavior of 316L stainless steel nano/micro bimodal powder, POWDER TECHNOLOGY, , 322, 1-8 (2017)
  • Influence of nano powder on rheological behavior of bimodal feedstock in powder injection molding, Powder Technology, , 311, 18-24 (2017)
  • Effects of material and processing conditions on powder-binder separation using the Taguchi method, POWDER TECHNOLOGY, , 321, 369-379 (2017)
  • Development of Representative Volume Element Homogenization Model for Predicting Transversely Isotropic Elasticity of Lithium-Ion Batteries, JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, , 139, - (2017)
  • Material Characterization of Single Crystalline Cu Subjected to High Strain Rates and High Temperatures for Multiscale Simulation, Journal of the Korean Institute of Metals and Materials, , 55, 760-767 (2017)
  • Flow Behaviour Characterization of Hydroxyapatite for Powder Injection Moulding (PIM), Journal of Mechanical Engineering, , SI 3, 77-88 (2017)
  • A comprehensive viscosity model for micro magnetic particle dispersed in silicone oil, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, , 404, 40-44 (2016)
  • Preparation of Ti-6Al-4V feedstock for titanium powder injection molding, Journal of Mechanical Science and Technology, , 30, 1859-1864 (2016)
  • Fabrication of high-aspect-ratio micro piezoelectric array by powder injection molding, Ceramics International, , 42, 9475-9481 (2016)
  • Design, fabrication and characterization of micro flow sensor inspired by biological hair cell, Microsystem Technologies, , , - (2016)
  • Dominant mechanisms of the sintering of copper nano-powders depending on the crystal misalignment, Computational Materials Science, , 123, - (2016)
  • Solid-state reactions of SiC/W-25Re alloy and thermal stability of SiC/Ti/W-25Re alloy under high temperature annealing, Advanced Engineering Materials, , 18, 1574-1580 (2016)
  • Effect of Nano Powder Ratio in Bimodal Powder Mixture on Powder Injection Molding, Powder Technology, , 302, 168-176 (2016)
  • Two-Phase Master Sintering Curve for 17-4 PH Stainless Steel, Metallurgical and Materials Transactions A, , 47, 5548-5556 (2016)
  • Experimental and Simulation Analysis on Hot Isostatic Pressing of Gas Atomized Stainless Steel 316L Powder Compacts, Korean Journal of Metals and Materials, , 54, 732-742 (2016)
  • Fabrication of glass components by sintering of commercial glass powder, Ceramics International, , , - (2015)
  • Analysis of iron powder design for compaction process, COMPUTATIONAL MATERIALS SCIENCE, , 100, 21-30 (2015)
  • Magneto-rheological model for computational analysis of magnetic micro powder injection molding, COMPUTATIONAL MATERIALS SCIENCE, , 100, 39-44 (2015)
  • Study of sintering behavior of PAN–PZT using dilatometry and co-relation with piezoelectric properties, CERAMICS INTERNATIONAL, , , - (2015)
  • Characterization and Simulation of Ni-Based Superalloy Powder Feedstock for Powder Injection Molding, INTERNATIONAL JOURNAL OF POWDER METALLURGY, , , - (2015)
  • Finite element simulation of PM gear rolling process, POWDER METALLURGY, , 58, 202-208 (2015)
  • High-temperature compression behavior of W–10 wt.%Cu composite, International Journal of Refractory Metals and Hard Materials, , 53, 87-91 (2015)
  • Bio-inspired piezoelectric artificial hair cell Bio-inspired piezoelectric artificial hair cell molding, Smart Materials and Structures, , 24, - (2015)
  • Interfacial Reaction at the Joint between Mo-41Re Alloy and SiC induced by High-Temperature Annealing, KOREAN JOURNAL OF METALS AND MATERIALS, , 53, 420-425 (2015)
  • Powder injection molding process design for UAV engine components using nanoscale silicon nitride powders, CERAMICS INTERNATIONAL, , 40, 893-900 (2014)
  • Development of Non-Eroding Rocket Nozzle Throat for Ultra-High Temperature Environment, International Journal of Refractory Metals & Hard Materials, , 42, 205-214 (2014)
  • Predicting Powder-Polymer Mixture Properties for PIM Design, Critical Reviews in Solid State and Materials Sciences, , 39, 197-214 (2014)
  • Imbalance Filling of Multi-cavity Tooling during Powder Injection Molding, Powder Technology, , 257, 124-131 (2014)
  • Rheologicalmodeling of strontium ferrite feedstock formagnetic powder injection molding, Powder Technology, , 262, 198-202 (2014)
  • Particle size effect on the magneto-rheological behavior of powder injection molding feedstock, MATERIALS CHARACTERIZATION, , 94, 19-25 (2014)
  • The effects of nanoparticle addition on binder removal from injection molded silicon carbide, CERAMICS INTERNATIONAL, , 40, 13861-13868 (2014)
  • Micromachining of stainless steel-polymer composites using nanosecond and femtosecond UV lasers, International Journal of Advanced Manufacturing Technology, , , - (2014)
  • Micromachining of stainless steel-polymer composites using nanosecond and femtosecond UV lasers, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, , 74, 1691-1699 (2014)
  • Rheological modeling of strontium ferrite feedstock for magnetic powder injection molding, POWDER TECHNOLOGY, , 262, 198-202 (2014)
  • The effects of nanoparticle addition on binder removal from injection molded aluminum nitride, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, , 36, 77-84 (2013)
  • The effects of nanoparticle addition on SiC and AlN powder-polymer mixtures: Packing and flow behavior, International Journal of Refractory Metals & Hard Materials, , , - (2013)
  • Analysis of the Effect of Solubility on the Densification Behavior of Tungsten Heavy Alloys using the Master Sintering Curve Approach, International Journal of Refractory Metals & Hard Materials, , , - (2013)
  • Effects of Particle Sizes on Sintering Behavior of 316L Stainless Steel Powder, Metallurgical and Materials Transactions A, , 44A, 1508-1518 (2013)
  • A New Method of Fabricating Robust Freeform 3D Ceramic Scaffolds for Bone Tissue Regeneration, Biotechnology and Bioengineering, , , - (2013)
  • Gas-assisted powder injection molding: A study about residual wall thickness, POWDER TECHNOLOGY, , 239, 389-402 (2013)
  • The effects of material attributes on powder–binder separation phenomena in powder injection molding, POWDER TECHNOLOGY, , 243, 79-84 (2013)
  • Fiber-optic OCT sensor guided "SMART" micro-forceps for microsurgery, BIOMEDICAL OPTICS EXPRESS, , 4, 1045-1050 (2013)
  • Rheological and sintering behaviors of nanostructured molybdenum powder, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, , 41, 442-448 (2013)
  • Rheological and sintering behavior of nanostructured molybdenum powder, International Journal of Refractory Metals & Hard Materials, , , - (2013)
  • Compressive behavior of a turtle's shell: Experiment, modeling, and simulation, Journal of the Mechanical Behavior of Biomedical Materials, , 6, 106-112 (2012)
  • Flake Orientation in Injection Molding of Pigmented Thermoplastics, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, , 134, - (2012)
  • Review: Thermal Debinding Process in Particulate Materials Processing, MATERIALS AND MANUFACTURING PROCESSES, , 27, 103-118 (2012)
  • DEVELOPMENT OF ULTRASONIC DENTAL TIPS BY POWDER INJECTION MOLDING, INTERNATIONAL JOURNAL OF POWDER METALLURGY, , 48, 11-20 (2012)
  • CRITICAL ISSUES IN MANUFACTURING DENTAL BRACKETS BY POWDER INJECTION MOLDING, INTERNATIONAL JOURNAL OF POWDER METALLURGY, , 48, 23-29 (2012)
  • In Situ Characterization of Strength and Distortion During Powder Metal Processing, JOM, , 64, 1-7 (2012)
  • Rheological behavior of magnetic powder mixtures for magnetic PIM, KOREA-AUSTRALIA RHEOLOGY JOURNAL, , 24, 121-127 (2012)
  • Master debinding curves for solvent extraction of binders in powder injection molding, POWDER TECHNOLOGY, , 228, 14-17 (2012)
  • Three-dimensional numerical analysis of injection-compression molding process, POLYMER ENGINEERING AND SCIENCE, , 52, - (2012)
  • Measurements of Powder–Polymer Mixture Properties and Their Use in Powder Injection Molding Simulations for Aluminum Nitride, Journal of the Minerals, Metals and Materials Society (JOM), , 64, 1048-1058 (2012)
  • Development of master sintering curve for field-assisted sintering of HfB2-20SiC, CERAMICS INTERNATIONAL, , 38, 4369-4372 (2012)
  • Taguchi analysis on the effect of process parameters on densification during spark plasma sintering of HfB2-20SiC, International Journal of Refractory Metals & Hard Materials, , 31, 293-296 (2012)
  • Equilibrium States of Liquid, Solid, and Vapor and the Configurations for Copper, Tungsten, and Pores in Liquid-Phase Sintering, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 42, 202-209 (2011)
  • The effects of water and microstructure on the mechanical properties of bighorn sheep (Ovis canadensis) horn keratin, ACTA BIOMATERIALIA, , 7, 1228-1240 (2011)
  • IN SITU OBSERVATION OF SHAPE LOSS DURING POLYMER BURNOUT IN PM PROCESSING, INTERNATIONAL JOURNAL OF POWDER METALLURGY, , 47, 45-54 (2011)
  • Numerical Prediction of Flake Orientation and Surface Color in Injection Molding of Flake-Pigmented Thermoplastics, POLYMER COMPOSITES, , 32, 1297-1303 (2011)
  • Investigation on die wear behaviour during compaction of aluminium matrix composite powders, POWDER METALLURGY, , 54, 202-208 (2011)
  • Sintering behaviour of Al-6061 powder produced by rapid solidification process, POWDER METALLURGY, , 54, 354-359 (2011)
  • Modeling and Simulation of Fiber Orientation in Injection Molding of Polymer Composites, MATHEMATICAL PROBLEMS IN ENGINEERING, , , - (2011)
  • Effects of Process Parameters in Plastic, Metal, and Ceramic Injection Molding Processes, KOREA-AUSTRALIA RHEOLOGY JOURNAL, , 23, 127-138 (2011)
  • Numerical Simulation of Hot Embossing Filling Stage using a Viscoelastic Constitutive Model, KOREA-AUSTRALIA RHEOLOGY JOURNAL, , 23, 139-146 (2011)
  • Rheology and processing of suspensions with fiber, disk and magnetic particles, KOREA-AUSTRALIA RHEOLOGY JOURNAL, , 23, 219-226 (2011)
  • The effect of vanadium-carbon monolayer on the adsorption of tungsten and carbon atoms on tungsten-carbide (0001) surface, SCIENCE OF SINTERING, , 43, 153-159 (2011)
  • Optimisation of Process Conditions in Powder Injection Moulding of Microsystem Components using Robust Design Method Part 2 – Secondary Design Parameters, POWDER METALLURGY, , 53, 71-81 (2010)
  • The Effects of Composition and Microstructure on the Thermal Conductivity of Liquid Phase Sintered W-Cu, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 41, 1564-1572 (2010)
  • Supersolidus Liquid Phase Sintering (SLPS) of 316L with Boron through Master Sintering Curve (MSC) Concept, POWDER METALLURGY, , 53, 20-26 (2010)
  • DSC analysis of Al6061 aluminum alloy powder by rapid solidification, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, , 100, 361-366 (2010)
  • Gas-assisted powder injection molding: A study on the effect of processing variables on gas penetration, POWDER TECHNOLOGY, , 200, 128-135 (2010)
  • Investigation on sintering mechanism of nanoscale tungsten powder based on atomistic simulation, ACTA MATERIALIA, , 58, 3939-3951 (2010)
  • Viscoelastic behaviour of porous sintered steels compact, POWDER METALLURGY, , 53, 107-111 (2010)
  • Sintering Behavior of Nanocrystalline Silicon Carbide Using a Plasma Pressure Compaction System: Master Sintering Curve Analysis, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 41A, 3252-3261 (2010)
  • Tribological behaviour of die tool materials used for die compaction in powder metallurgy, POWDER METALLURGY, , 53, 251-259 (2010)
  • Studies on the Thermal Stability and Degradation Kinetics of Pd/PC Nanocomposites, JOURNAL OF APPLIED POLYMER SCIENCE, , 118, 3602-3611 (2010)
  • Mechanical Alloying of FeAl Intermetallic Powder for Injection Moulding Process, POWDER METALLURGY, , 53, 208-212 (2010)
  • A REVIEW OF COMPUTER SIMULATIONS IN POWDER INJECTION MOLDING, INTERNATIONAL JOURNAL OF POWDER METALLURGY, , 46, 37-46 (2010)
  • CHARACTERIZATION AND SIMULATION OF MACROSCALE MOLD-FILLING DEFECTS IN MICROMINIATURE POWDER INJECTION MOLDING, INTERNATIONAL JOURNAL OF POWDER METALLURGY, , 46, 49-58 (2010)
  • RHEOLOGICAL AND THERMAL DEBINDING BEHAVIORS IN TITANIUM POWDER INJECTION MOLDING, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 40A, 215-222 (2009)
  • REVIEW: LIQUID PHASE SINTERING, JOURNAL OF MATERIALS SCIENCE, , 44, 1-39 (2009)
  • GRAIN GROWTH IN DILUTE TUNGSTEN HEAVY ALLOYS DURING LIQUID-PHASE SINTERING UNDER MICROGRAVITY CONDITIONS, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 40A, 426-437 (2009)
  • DEVELOPMENT OF A TI-BASED ALLOY: DESIGN AND EXPERIMENT, JOM, , 61, 60-66 (2009)
  • LINKING HOMOGENIZATION AND DENSIFICATION IN W-NI-CU ALLOYS THROUGH MASTER SINTERING CURVE (MSC) CONCEPTS, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, , 27, 688-695 (2009)
  • EFFECT OF POWDERS AND BINDERS ON MATERIAL PROPERTIES AND MOLDING PARAMETERS IN IRON AND STAINLESS STEEL POWDER INJECTION MOLDING PROCESS, POWDER TECHNOLOGY, , 193, 162-169 (2009)
  • LINEARIZATION OF MASTER SINTERING CURVE, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, , 92, 1403-1409 (2009)
  • MASTER SINTERING CURVE FORMULATED FROM CONSTITUTIVE MODELS, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, , 92, 1410-1413 (2009)
  • Sensitivity analysis by the adjoint variable method for optimization of the die compaction process in particulate materials processing, FINITE ELEMENTS IN ANALYSIS AND DESIGN, , 45, 836-844 (2009)
  • Design of Experiment Approach for Sintering Study of Nanocrystalline SiC Fabricated Using Plasma Pressure Compaction, SCIENCE OF SINTERING, , 41, 125-133 (2009)
  • Utilisation of silicon rubber to characterise tool surface quality during die compaction, POWDER METALLURGY, , 52, 238-243 (2009)
  • GRAIN SIZE MEASUREMENT METHODS AND MODELS FOR NANOGRAINED WC-CO, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, , 26, 152-163 (2008)
  • THE EFFECT OF FE ATOMS ON THE ADSORPTION OF A W ATOM ON W(100) SURFACE, JOURNAL OF APPLIED PHYSICS, , 103, 106103-106103 (2008)
  • OPTIMISATION OF PROCESS CONDITIONS IN POWDER INJECTION MOULDING OF MICROSYSTEM COMPONENTS USING A ROBUST DESIGN METHOD: PART I. PRIMARY DESIGN PARAMETERS, POWDER METALLURGY, , 51, 133-142 (2008)
  • MELTING TUNGSTEN NANOPARTICLES: A MOLECULAR DYNAMICS STUDY, JOURNAL OF PHYSICS D-APPLIED PHYSICS, , 41, 185406-185406 (2008)
  • MASTER SINTERING CURVE FOR DENSIFICATION DERIVED FROM A CONSTITUTIVE EQUATION WITH CONSIDERATION OF GRAIN GROWTH: APPLICATION TO TUNGSTEN HEAVY ALLOYS, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 39A, 2941-2948 (2008)
  • INTEGRATED FILLING, PACKING AND COOLING CAE ANALYSIS OF POWDER INJECTION MOULDING PARTS, POWDER METALLURGY, , 51, 318-326 (2008)
  • MASTER DECOMPOSITION CURVE ANALYSIS OF ETHYLENE VINYL ACETATE PYROLYSIS: INFLUENCE OF METAL POWDERS, POWDER METALLURGY, , 51, 368-375 (2008)
  • Effect of die compaction pressure on densification behavior of molybdenum powders, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, , 25, 16-24 (2007)
  • Development of niobium powder injection molding. Part II: Debinding and sintering, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, , 25, 226-236 (2007)
  • PROCESS SIMULATION OF POWDER INJECTION MOULDING: IDENTIFICATION OF SIGNIFICANT PARAMETERS DURING MOULD FITTING PHASE, POWDER METALLURGY, , 50, 76-85 (2007)
  • Master decomposition curve for binders used in powder injection molding, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 38A, 606-614 (2007)
  • Master sintering curve concepts as applied to the sintering of molybdenum, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 37A, 715-720 (2006)
  • Development of niobium powder injection molding: Part I. Feedstock and injection molding, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, , 24, 253-262 (2006)
  • Injection molding of HDH titanium powder, INTERNATIONAL JOURNAL OF POWDER METALLURGY, , 42, 59-66 (2006)
  • Application of work-of-sintering concepts in powder metals, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 37A, 2827-2835 (2006)
  • Densification behavior of tungsten heavy alloy based on master sintering curve concept, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 37A, 2837-2848 (2006)
  • Grain growth behavior of tungsten heavy alloys based on the master sintering curve concept, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 37A, 3337-3346 (2006)
  • Finite element simulation of liquid phase sintering with tungsten heavy alloys, MATERIALS TRANSACTIONS, , 47, 2745-2752 (2006)
  • Critical use of video-imaging to rationalize computer sintering simulation models, COMPUTERS IN INDUSTRY, , 56, 867-875 (2005)
  • NUMERICAL ANALYSIS OF FILLING STAGE DURING POWDER INJECTION MOULDING: EFFECTS OF FEEDSTOCK RHEOLOGY AND MIXING CONDITIONS, POWDER METALLURGY, , 47, 137-143 (2004)
  • DIRECT SURFACE FORMING: NEW POLYMER PROCESSING TECHNOLOGY FOR LARGE LIGHT GUIDE OF TFT-LCD MODULE, KOREA-AUSTRALIA RHEOLOGY JOURNAL, , 15, 167-171 (2003)
  • Injection molding technology for high speed optical disk, INTERNATIONAL POLYMER PROCESSING, , 16, 285-290 (2001)
  • NUMERICAL MODELING OF INJECTION/COMPRESSION MOLDING FOR CENTER-GATED DISK: PART I. INJECTION MOLDING WITH VISCOELASTIC COMPRESSIBLE FLUID MODEL, POLYMER ENGINEERING AND SCIENCE, , 39, 1930-1942 (1999)
  • NUMERICAL MODELING OF INJECTION/COMPRESSION MOLDING FOR CENTER-GATED DISK: PART II. EFFECT OF COMPRESSION STAGE, POLYMER ENGINEERING AND SCIENCE, , 39, 1943-1951 (1999)
  • THERMAL AND DESIGN SENSITIVITY ANALYSES FOR COOLING SYSTEM OF INJECTION MOLD, PART 1: THERMAL ANALYSIS", JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, , 120, 287-295 (1998)
  • THERMAL AND DESIGN SENSITIVITY ANALYSES FOR COOLING SYSTEM OF INJECTION MOLD, PART 2: DESIGN SENSITIVITY ANALYSIS", JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, , 120, 296-305 (1998)
  • OPTIMAL COOLING SYSTEM DESIGN FOR THE INJECTION MOLDING PROCESS, POLYMER ENGINEERING AND SCIENCE, , 38, 1450-1462 (1998)
  • OPTIMIZATION METHOD FOR STEADY CONDUCTION IN SPECIAL GEOMETRY USING A BOUNDARY ELEMENT METHOD, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, , 43, 1109-1126 (1998)
  • Sensitivity analysis formulation for three-dimensional conduction heat transfer with complex geometries using a boundary element method, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, , 39, 2837-2862 (1996)

국내전문학술지

  • Representative Volume Element Analysis of Fluid-Structure Interaction Effect on Graphite Powder Based Active Materials for Lithium-Ion Batteries, Journal of Korean Powder Metallurgy Institute, , , - (2017)
  • Optimization of Process Condition for Fe Nano Powder Injection Molding, 한국분말야금학회지, , 24, 223-228 (2017)
  • Development of Powder Injection Molding Process for Fabrication of Glass Component, Journal of Korean Powder Metallurgy Institute, , 23, 26-32 (2016)
  • Development of powder injection molding process for a piezoelectric PAN-PZT ceramics, Journal of Korean Powder Metallurgy Institute, , 23, 112-119 (2016)
  • Power generation characteristics of thermoelectric module for waste heat energy harvesting, Journal of Energy Engineering, , , - (2016)
  • Simulation and Experiment of Injection Molding Process for Superalloy Feedstock, Journal of Korean Powder Metallurgy Institute, , , - (2015)
  • Atomistic Simulation of Sintering Mechanism for Copper Nano-Powders, Journal of Korean Powder Metallurgy Institute, , 22, 247-253 (2015)
  • Densification Behavior of Rhenium Alloy using Master Sintering Curve, Journal of Korean Powder Metallurgy Institute, , 21, 7-15 (2014)
  • Spark Plasma Sintering Behaviors of M-type Barium Hexaferrite Nano Powders, Journal of Korean Powder Metallurgy Institute, , , - (2014)
  • Preparation of Metal Injection Molded Dental Components using Spheroidized Ti Powders by Plasma Process, Journal of Korean Powder Metallurgy Institute, , , - (2013)
  • APPLICATIONS OF NUMERICAL ANALYSIS TECHNOLOGY IN POWDER INJECTION MOLDING PROCESS, JOURNAL OF KOREAN POWDER METALLURGY INSTITUTE, , 9, 261-266 (2002)
  • NUMERICAL MODELING OF INJECTION/COMPRESSION MOLDING FOR CENTER-GATED DISC (PART I) – INJECTION MOLDING WITH VISCOELASTIC COMPRESSIBLE FLUID MODEL, TRANSACTIONS OF KSME (A), , 22, 289-301 (1998)
  • NUMERICAL MODELING OF INJECTION/COMPRESSION MOLDING FOR CENTER-GATED DISC (PART II) – EFFECT OF COMPRESSION STAGE, TRANSACTIONS OF KSME (A), , 22, 302-310 (1998)
  • OPTIMUM DESIGN OF INJECTION MOLDING COOLING SYSTEM DESIGN VIA BOUNDARY ELEMENT METHOD, TRANSACTIONS OF KSME (A), , 21, 1173-1185 (1997)
  • Atomistic Simulation of Sintering Mechanism for Copper Nano-Powders, Journal of Korean Powder Metallurgy Institute, , , - (0020)

일반학술지

  • Development of Hydrophobic Surgical Forceps using Powder Injection Molding and Surface Treatment, Archives of Metallurgy and Materials, , , - (2018)
  • Rheological Characterization of Powder Mixture Including a Space Holder and Its Application to Metal Injection Molding, Metals, , 7, - (2017)
  • Fabrication of WC-Co Cutting Tool by Powder Injection Molding, International Journal of Precision Engineering and Manufacturing, , , - (2015)
  • Micro Structural Evolution of a 93 Wt% Tungsten Heavy Alloy: A Quenching Study to Understand the Evolution of Contiguity, Connectivity with Sintering Temperature and Time, Journal of Powder Metallurgy & Mining, , , - (2015)
  • APMA 2013 conference: Advances in MIM applications and materials presented in Xiamen, Powder Injection Moulding International, , , - (2014)
  • The development of a Powder insert-Injection Molding process for ceramic-metal joints, PIM International, , , - (2013)
  • Development of PIM Components for Robot Surgery, Periodicals of Engineering and Natural Sciences, , , - (2013)
  • Powder Injection Molding of SiC for Thermal Management, Technology in Metallurgy, Materials, and Mining, , 9, 123-131 (2012)
  • Powder injection moulding of barium titanate for capacitor applications, PIM International, , , - (2011)
  • PIM in Korea: A Review of Technology Development, Production and Research Activities, POWDER INJECTION MOULDING INTERNATIONAL, , 4, 29-35 (2010)
  • Properties of SiC and AlN feedstocks for the powder injection molding of thermal management devices, PIM INTERNATIONAL, , 4, 64-70 (2010)
  • Mixing Simulation for Powder Injection Moulding Feedstock: Quantification and Sensitivity Analysis, PIM International, , 3, 60-63 (2009)
  • Characterisation of alumina feedstock with polyacetal and ethylene-propylene wax binder systems for micro powder injection moulding, PIM International, , 3, 64-70 (2009)
  • Application of a simulation tool in powder injection molding (PIM), Powder Injection Moulding International, , 3, 64-69 (2009)
  • Material homogeneity in powder injection moulded ceramic microchannel arrays, PIM International, , 2, 68-73 (2008)
  • Master Curves Based on Time Integration of Thermal Work in Particulate Materials, INTERNATIONAL JOURNAL OF MATERIALS AND STRUCTURAL INTEGRITY, , 1, 128-147 (2007)
  • CAE-Based Process Design of PIM for Microfluidic Device Components, PIM International, , 1, 53-58 (2007)
  • Effects of Spheroidization on Particle Characteristics and Feedstock Rheologies of HDH Ti Powder, POWDER METALLURGY INDUSTRY, , 16, 1-4 (2006)
  • FINITE ELEMENT SIMULATION OF SINTERING SHRINKAGE IN LARGE PIM PART,, P / M SCIENCE & TECHNOLOGY BRIEFS, , 6, 13-18 (2004)

학술회의논문

  • Numerical Simulation of Powder Compaction and Its Verification, PROCEEDINGS OF ISNNM 2014, 0, 0, - (2014)
  • Rheological Modeling of Magnetic Powder Injection Molding, PROCEEDINGS OF ISNNM 2014, 0, 0, - (2014)
  • Fabrication of WC-Co cutting tool for patternless sand-mold casting by powder injection molding, PROCEEDINGS OF ISGMA2014, 0, 0, - (2014)
  • Military Application of Powder Injection Molding Technology, PROCEEDINGS OF 2014 KOREA MILITARY SCIENCE AND TECHNOLOGY, 0, 0, - (2014)
  • Investigation of PZT Ceramics Produced by Powder Processing, PROCEDDINGS OF PM2014 (POWDER METALLURGY WORLD CONGRESS), 0, 0, - (2014)
  • High-temperature mechanical properties of tungsten-copper (W-Cu) alloy, PROCEEDINGS OF TUNGSTEN, REFRACTORY & HARDMATERIALS CONFERENCE 2014, 0, 0, - (2014)
  • Particle size effect on the rheological behavior of magnetic feedstock for magnetic powder injection molding, PROCEDDINGS OF PM2014 (POWDER METALLURGY WORLD CONGRESS), 0, 0, - (2014)
  • Atomistic simulation of sintering mechanism for nano-scale copper powders, PROCEEDINGS OF PM2014 (POWDER METALLURGY WORLD CONGRESS), 0, 0, - (2014)
  • Development of Nozzle Throat based on W-25wt%Re using Powder Injection Molding, PROCEEDINGS OF TUNGSTEN, REFRACTORY & HARDMATERIALS CONFERENCE 2014, 0, 0, - (2014)
  • Injection process simulation for powder injection molding of Ni-based superalloy powder, PROCEEDINGS OF PM2014 (POWDER METALLURGY WORLD CONGRESS), 0, 0, - (2014)
  • Microgravity Liquid Phase Sintering of Tungsten Alloys, PROCEEDINGS OF 2014 SPRING CONFERENCE OF THE KOREA SOCIETY OF MICROGRAVITY, 0, 0, - (2014)
  • Measurement of Material Parameters for PM Simulation and Its Verification, PROCEEDINGS OF 2014 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2014)
  • Development of Micro PZT Structure Using Powder Injection Molding Technology, PROCEEDINGS OF 2014 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2014)
  • Sintering Analysis of Stainless Steel 316L Bi-Modal Powder for Development of Multi-Distribution Powder Sintering Model, PROCEEDINGS OF 2014 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2014)
  • Sr-Fe Powder Orientation Model for a Single Ellipsoidal Magnetic Immersed in a Viscous Shear Flow, PROCEEDINGS OF 2014 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2014)
  • Densification Behavior of Rhenium Alloy for Non-Eroding Rocket Nozzle, PROCEEDINGS OF 2014 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2014)
  • Experiment and Simulation of Hot Isostatic Pressing Process Using ST316L Powder, PROCEEDINGS OF 2014 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2014)
  • Constitutive Equation for High Strain Rate and High Temperature at Atomistic Scale, PROCEEDINGS OF 2014 PLASTICITY, 0, 0, - (2014)
  • Modeling and Simulation in Powder Metallurgy, PROCEEDINGS OF APMA 2013, 0, 0, - (2013)
  • Fabrication of PDP Glass Compacts using Pressureless Sintering with Hot Isostaic Press, PROCEEDINGS OF 2013 FALL CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2013)
  • Molecular Dynamics Simulation of the Tensile Test for Tungsten-Copper Alloy, PROCEEDINGS OF 2013 FALL CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2013)
  • Compaction and Sintering Simulation of UO2 and UO2+8wt%U3O8 Mixture, PROCEEDINGS OF 2013 FALL CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2013)
  • Development of End-Effector for Minimally Invasive Surgery by Powder Injection Molding, PROCEEDINGS OF 2013 FALL CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2013)
  • Processing and Properties of Piezoelectric Ceramic through Powder Injection Molding, PROCEEDINGS OF 2013 FALL CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2013)
  • Particle Size Effect on the Magneto-rheological Behavior of Feedstock for Magnetic Powder Injection Molding, PROCEEDINGS OF 2013 FALL CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2013)
  • Sensitivity Analysis for Die Compaction of FC0208 Powder, PROCEEDINGS OF 2013 FALL CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2013)
  • Sensitivity Analysis for Sintering Parameters to Develop A New Constitutive Model of Bi-Modal Powder, PROCEEDINGS OF ICFPE 2013, 0, 0, - (2013)
  • Application of Microelectronics by Using Powder Injection Molding, PROCEEDINGS OF ICFPE 2013, 0, 0, - (2013)
  • Development of Manufacturing Process for Piezoelectric Materials Using Powder Injection Molding Technology, PROCEEDINGS OF 2013 KOREA MILITARY SCIENCE AND TECHNOLOGY, 0, 0, - (2013)
  • Development of Manufacturing Process for Piezoelectric Materials using Powder Injection Molding Technology, PROCEEDINGS OF 2013 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2013)
  • Atomistic Simulation of Sintering Mechanism of Nano-Scale Copper Powder, PROCEEDINGS OF 2013 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2013)
  • Computational and experimental study of the super alloy powder injection molding for turbine blade, PROCEEDINGS OF 2013 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2013)
  • PIM: Basics and Applications, PROCEEDINGS OF PM CONFERENCE 2012 – CHINA, 0, 0, - (2012)
  • New Proposal: PIM Research Center, PROCEEDINGS OF PM CONFERENCE 2012 – CHINA, 0, 0, - (2012)
  • Modeling and Simulation of Press and Sinter Powder Metallurgy, PROCEEDINGS OF JSTP 2012, 0, 0, - (2012)
  • Investigation of Particle Size Effects on Sintering Behavior, PROCEEDINGS OF 2012 KPMI FALL CONFERENCE, 0, 0, - (2012)
  • New Development and Tend in Powder Injection Molding, PROCEEDINGS OF PM2012, 0, 0, - (2012)
  • High-temperature mechanical properties of tungsten-copper (W-Cu) alloy, PROCEEDINGS OF PM2012, 0, 0, - (2012)
  • Simulation of the sintering behavior of nickel based superalloy Inconel 713C powders for powder injection molding, PROCEEDINGS OF PM2012, 0, 0, - (2012)
  • Finite Element Simulation of Designing Gears for Porous Metals, PROCEEDINGS OF PM2012, 0, 0, - (2012)
  • Development of automobile components based on TiH2 Powder Metallurgy, PROCEEDINGS OF PM2012, 0, 0, - (2012)
  • Rheological behavior of magnetic powder mixtures for magnetic PIM, PROCEEDINGS OF PM2012, 0, 0, - (2012)
  • Development of PIM Process based on Re Alloy for Non-Eroding Rocket Nozzle Throat, PROCEEDINGS OF PM2012, 0, 0, - (2012)
  • Development of a Powder Co-Injection Molding Process for Ceramic-Metal Joints, PROCEEDINGS OF PM2012, 0, 0, - (2012)
  • A Study on Non-Eroding Rocket Nozzle Throat under Ultra High Temperature Environments, PROCEEDINGS OF CONFERENCE ON GUIDED WEAPONS, 0, 0, - (2012)
  • Improved Thermal Conductivity of Nuclear-Fuel Oxides using Ablated Metallic Particle Powder Sintering, PROCESSINGS OF 2012 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2012)
  • Development of Powder Processing for Tungsten-Rhenium Alloy, PROCEEDINGS OF 2012 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2012)
  • Development of a Powder Co-Injection Molding Process for Metal-Ceramic Joints, PROCEEDINGS OF 2012 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2012)
  • Micromachining of Powder Injection Molded Part Using Ns UV Laser, PROCEEDINGS OF 2012 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2012)
  • Finite Element Simulation of Designing Gears for Porous Metals, PROCEEDINGS OF 2012 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2012)
  • Investigation of Sintering Behavior and Mechanical Properties for TiH2 and Ti-6Al-4V Using Powder Processing, PROCEEDINGS OF 2012 SPRING CONFERENCE OF KOREAN POWDER METALLURGY INSTITUTE, 0, 0, - (2012)
  • Issues and Trends in Powder Injection Molding in Korea; Research and Applications, PROCEEDINGS OF 2012 TMS ANNUAL MEETING & EXHIBITION, 0, 0, - (2012)
  • Fabrication and characterization of polymer-based-MEMS flow sensor using artificial hair cell, PROCEEDINGS OF ISNIT 2012, 0, 0, - (2012)
  • Bio-Inspired Design For Porous Metal Composites, PROCEEDINGS OF THE ISNIT 20, 0, 0, - (2012)
  • Micro Powder Injection Molding: Current and Future, PROCEEDINGS OF 5TH POWDER METALLURGY SYMPOSIUM & EXHIBITION, 0, 0, - (2011)
  • Powder Metallurgy Simulations: Press-Sinter and Injection Molding, PROCEEDINGS OF MS&T’11, 0, 0, - (2011)
  • Modeling and Simulation for Sintering Process, PROCESSINGS OF 6TH INTERNATIONAL POWDER METALLURGY CONFERENCE & EXHIBITIO, 0, 0, - (2011)
  • Characterizations of magnetic powder mixtures for the magnetic PIM, PROCEEDINGS OF THE 6TH KOREAN-AUSTRALIAN RHEOLOGY CONFERENCE 2011, 0, 0, - (2011)
  • Development and Analysis of Bio-Inspired Design Aluminum Composites, PROCEEDINGS OF METFOAM 2011, 0, 0, - (2011)
  • Particle Size Effect on Sintering Behavior of 316L and 17-4 PH Stainless Steel Powders, PROCESSINGS OF SINTERING 2011, 0, 0, - (2011)
  • Modeling and Simulation for Sintering Process, PROCEEDINGS OF SINTERING 2011, 0, 0, - (2011)
  • Molecular Dynamics Simulation of Sintering Process for Nanoscale Copper Powders, PROCEEDINGS OF SINTERING 2011, 0, 0, - (2011)
  • Effects of Particle Size on the Sintering Behavior of Titanium Alloy, PROCESSINGS OF SINTERING 2011, 0, 0, - (2011)
  • Molecular Dynamics Simulation of the Tensile Test for Nanoscale Copper Columns, PROCEEDINGS OF MOLECULAR DYNAMICS SIMULATION OF THE TENSILE TEST FOR NANOSCALE COPPER COLUMNS, 0, 0, - (2011)
  • Rheology and Processing of Suspensions with Fiber, Disk and Magnetic Particles, PROCEEDINGS OF INTERNATIONAL SYMPOSIUM ON APPLIED RHEOLOGY 2011, 0, 0, - (2011)
  • Rheological behavior of magnetic powder mixtures for PIM, PROCEEDINGS OF INTERNATIONAL SYMPOSIUM ON APPLIED RHEOLOGY, 0, 0, - (2011)
  • Powder Injection Molding of Multiscale Titanium Parts – Micro Features and Surface Modification, PROCEEDINGS OF POWDERMET 2011, 0, 0, - (2011)
  • Gas-Assisted Powder Injection Molding: Mold-Cavity Effects on Residual Wall, PROCEEDINGS OF POWDERMET 2011, 0, 0, - (2011)
  • Gas-Assisted Powder Injection Molding and Its Effects on Debinding and Sintering, PROCESSINGS OF POWDERMET 2011, 0, 0, - (2011)
  • Encapsulation of Titanium Powders during Binder Removal from a Metal Injection Molded Part, PROCESSINGS OF POWDERMET 2011, 0, 0, - (2011)
  • Development of Medical Device Component Using Micro Powder Injection Molding, PROCEEDINGS OF 2011 KSME SPRING CONFERENCE OF BIO DIVISION, 0, 0, - (2011)
  • The effects of water and microstructure on the mechanical properties of bighorn sheep (Ovis canadensis) horn keratin, PROCEEDINGS OF 2011 KSME SPRING CONFERENCE OF BIO DIVISION, 0, 0, - (2011)
  • Computer Simulation in micro Powder Injection Molding, PROCEEDINGS OF 2011 KIM (KOREAN INSTITUTE OF METALS AND MATERIALS) SPRING CONFERENCE, 0, 0, - (2011)
  • Dental Applications in micro Powder Injection Molding, PROCEEDINGS OF 2011 KIM (KOREAN INSTITUTE OF METALS AND MATERIALS) SPRING CONFERENCE, 0, 0, - (2011)
  • Fabrication and Characterization of Artificial Hair Cell Sensor Based on MWCNT-PDMS Composite, PROCEEDINGS OF SPIE MICROTECHNOLOGIES 2011, 0, 0, - (2011)
  • Master Sintering Curve Formulated from Constitutive Models, PROCEEDINGS OF 2011 KPMI (THE KOREAN POWDER METALLURGY INSTITUTE) SPRING CONFERENCE, 0, 0, - (2011)
  • Modeling and Simulation of Press and Sinter Powder Metallurgy, PROCEDDINGS OF 2011 KPMI (THE KOREAN POWDER METALLURGY INSTITUTE) SPRING CONFERENCE, 0, 0, - (2011)
  • Effect of Rheological Behavior in Powder Injection Molding Process, PROCEEDINGS OF 2010 FALL CONFERENCE OF KOREAN SOCIETY OF RHEOLOGY, 0, 0, - (2010)
  • Micro Particle Orientation during Injection Molding of Polymer Composite, PROCEEDINGS OF 7TH SYMPOSIUM ON MOLD TOOLING, 0, 0, - (2010)
  • Process Development and Modeling for Thermal Management: Nano-W-Coated-Cu and CNT-Reinforced-Cu, PROCEEDINGS OF CSS12, 0, 0, - (2010)
  • Parametric Study of the Structure-Property Relations of Bighorn Sheep (Ovis canadensis) Horn, ABSTRACT OF ISNIT, 0, 0, - (2010)
  • Investigation on The Compressive Behavior of Turtle’s Shell: Experiment, Modeling, and Simulation, ABSTRACT OF ISNIT, 0, 0, - (2010)
  • Dental Applications of Micro PIM, PM2010 CD PROCEEDINGS, 0, 0, - (2010)
  • Micromachining of Powder Injection Molded Compacts Using ns UV Laser, PM2010 CD PROCEEDINGS, 0, 0, - (2010)
  • Evaluation of Particle Size Effect of 17-4 PH Stainless Steel and 316L Stainless Steel in Powder Injection Molding, PM2010 CD PROCEEDINGS, 0, 0, - (2010)
  • Press-Sinter Simulation Tool and Its Applications,” PM2010 CD Proceedings, PM2010 CD PROCEEDINGS, 0, 0, - (2010)
  • Simulation Tool for Powder Injection Molding and Its Applications, PM2010 CD PROCEEDINGS, 0, 0, - (2010)
  • Thermal Management Application of Nano Tungsten-Copper Composite Powder, PM2010 CD PROCEEDINGS, 0, 0, - (2010)
  • Development of W/Cu FGM material for Plasma Facing Components, PM2010 CD PROCEEDINGS, 0, 0, - (2010)
  • Gas Assisted Injection Molding of Polymer and Powder Metal Feedstock in a Stereolithography Mold, POWDERMET 2010, 0, 0, - (2010)
  • Investigation on Sintering Mechanism of Nanoscale Tungsten Powder Based on Atomistic Simulation, NUMIFORM 2010, 0, 0, - (2010)
  • Laser Micromachining of Stainless Steel Powder/Polymer Composite, PROCEEDINGS ON LPM 2010, 0, 0, - (2010)
  • Investigation on the Compressive Behavior of Turtle’s Shell: Experiment, Modeling, and Simulation, PROCEEDINGS OF 2010 KSME SPRING CONFERENCE OF BIO DIVISION, 0, 0, - (2010)
  • Fabrication of W/Cu FGM by Nano W-Cu Composite Powders, PROCEEDINGS OF 2010 SPRING CONFERENCE OF KIMM, 0, 0, - (2010)
  • Liquid Phase Sintering Simulation under Various Gravity Conditions, PROCEEDINGS OF 1ST 2010 SPRING CONFERENCE OF THE KOREA SOCIETY OF MICROGRAVITY, 0, 0, - (2010)
  • Development of Thermal Management Materials: W-Cu and Cu-CNT, PROCEEDINGS OF 2010 SPRING CONFERENCE OF THERMAL PROPERTIES, 0, 0, - (2010)
  • Micro Powder Injection Molding & Its Research Trends, PROCEEDINGS OF 2009 FALL MEETING OF POHANG BRANCH, KOREA SOCIETY OF MECHANICAL ENGINEERING (KSME), 0, 0, - (2009)
  • Micro Powder Injection Molding & Its Research Trends, PROCEEDINGS OF 6TH SYMPOSIUM ON MOLD TOOLING, 0, 0, - (2009)
  • Micromachining of powder injection molded parts using ns UV laser, PROCEEDINGS OF 2009 ANNUAL MEETING (AUTUMN) OF KOREAN SOCIETY OF LASER PROCESSING, 0, 0, 59-63 (2009)
  • Experimental and Theoretical Analysis of the Factors Affecting the Thermal Conductivity of W-Cu, PROCEEDINGS OF 17TH PLANSEE SEMINAR 2009, 0, 0, - (2009)
  • Atomistic Scale Study on Sintering of Nano Scale Tungsten Powder, PROCEEDINGS OF 17TH PLANSEE SEMINAR 2009, 0, 0, - (2009)
  • Development of Thermal Management Material: Nano Tungsten Coated Copper and Carbon Nanotube Reinforced Copper, PROCESSINGS OF 17TH PLANSEE SEMINAR 2009, 0, 0, - (2009)
  • Powder Metallurgy in CAVS, PROCEDDINGS OF CPMT TECHNOLOGY FOCUS MEETING 2009, 0, 0, - (2009)
  • Benefits to Industry from Simulation of Polymer Processing: Cost Reduction and Quality Improvement, PROCEEDINGD OF SPE MISSISSIPPI CHAPTER MEETING, 0, 0, - (2009)
  • Fabrication of Bio-Inspired Design Engineering Components by Powder Metallurgy, PROCEEDINGS OF SPE MISSISSIPPI CHAPTER MEETING, 0, 0, - (2009)
  • Effect of Powders and Binders on Rheological Behavior and Molding Parameters in Powder Injection Molding Process, PROCEEDINGS OF PIM 2009, 0, 0, - (2009)
  • Development of Powder Injection Molding Process for Sponge Ti Alloy, PROCEEDINGS OF PIM 2009, 0, 0, - (2009)
  • Filling enhancement of microarrays by gas-assisted powder injection molding, PROCEEDINGS OF PIM 2009, 0, 0, - (2009)
  • The Effect of Processing Variables on Gas Penetration Depth in Gas-Assisted Powder Injection Molding, PROCEEDINGS OF PIM 2009, 0, 0, - (2009)
  • Development of Copper Distributor by Powder Injection Molding, PROCEDDINGS OF PIM 2009, 0, 0, - (2009)
  • Development of Powder Injection Molding Process for Sponge Ti Alloy, PROCEDDINGS OF TMS 2009, 0, 0, - (2009)
  • Investigation on the Compressive Behavior of Turtle’s Shell: Experiment, Modeling, and Simulation, PROCESSINGS OF TMS 2009, 0, 0, - (2009)
  • Mechanical Properties of Aluminum 6061 Alloys by Powder Metallurgy, PROCEEDINGS OF TMS 2009, 0, 0, - (2009)
  • The Gravitational Role in Liquid Phase Sintering, SINTERING 2008, 0, 0, - (2008)
  • Atomistic Scale Study on Effect of Crystalline Misalignment on Densification during Sintering Nano Scale Tungsten Powder, SINTERING 2008, 0, 0, - (2008)
  • Master Sintering Curve Formulated from Constitutive Models, SINTERING 2008, 0, 0, - (2008)
  • The Effect of Volume Fraction on Grain Growth during Liquid Phase Sintering of Tungsten Heavy Alloys, SINTERING 2008, 0, 0, - (2008)
  • Linearization of Master Sintering Curve, SINTERING 2008, 0, 0, - (2008)
  • Investigation of Sintering Behavior and Mechanical Properties of Al P/M Alloys by the Addition of Cu and Mg, 5TH INTERNATIONAL PM CONFERENCE, 0, 0, - (2008)
  • Effect of boron additions on microstructural and mechanical mechanical properties of Ti-5Fe alloy for structural applications, 5TH INTERNATIONAL PM CONFERENCE, 0, 0, - (2008)
  • Fabrication of Bio-Inspired Design Engineering Components by Powder Metallurgy, BIO INSPIRED DESIGN 2008 CONFERENCE, 0, 0, - (2008)
  • Development Novel Bio-Inspired Design Ferrous Components, BIO INSPIRED DESIGN 2008 CONFERENCE, 0, 0, - (2008)
  • Mapping between Material Design and Properties Using Material Informatics for P/M Simulation, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2008)
  • Prediction of Tool Wear and Tool Life by Experiment/Modeling/Simulation of the Die Compaction Process, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2008)
  • Integrated Simulation of Mold Filling (Binder-Powder Separation), Debinding, and Sintering in Powder Injection Molding, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2008)
  • Taguchi Method for Sintering Study of Nanocrystalline Silicon Carbide Fabricated using Plasma Pressure Compaction, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2008)
  • High Rate Deformation in Press-and-Sintered W-Cu using Hopkinson Bar Test, PROCEEDINGS OF THE 2008 INTERNATIONAL CONFERENCE ON TUNGSTEN, 0, 0, - (2008)
  • Three Dimensional Atomistic Simulation of the Sintering and Shrinkage Behavior of Tungsten Nanoparticles, PROCEEDINGS OF THE 2008 INTERNATIONAL CONFERENCE ON TUNGSTEN, 0, 0, - (2008)
  • Development and Analysis of Bio-Inspired Design Aluminum Composites, PROCEEDINGS OF THE 2008 WORLD CONGRESS ON POWDER METALLURGY & PARTICLATE MATERIALS (WORLD CONGRESS PM 2008), 0, 0, - (2008)
  • Mixing Simulation for Powder Injection Molding Feedstock: Quantification and Sensitivity Analysis, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2008)
  • Microstructure and Mechanical Properties of Sintered Ti-Fe-Zr Alloy, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2008)
  • The Effect of Feedstock Composition on Defect Evolution in Powder Injection Molded Ceramic Microarrays, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2008)
  • Injection Molding of Micro-Porous 316L Stainless Steel Parts, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2008)
  • The Effect of Processing Variables on Gas Bubble Formation in Gas-Assisted Powder Injection Molding, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2008)
  • Spark Plasma Sintering of Ultrahigh Temperature Ceramics, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2008)
  • EDM Performance of W-Cu Electrodes by Nano Tungsten Coated Copper Composite Powder, PROCEEDINGS OF THE 2008 WORLD CONGRESS ON POWDER METALLURGY & PARTICLATE MATERIALS (WORLD CONGRESS PM 2008), 0, 0, - (2008)
  • Development of Carbon Nanotube Reinforced Copper, PROCEEDINGS OF THE 2008 WORLD CONGRESS ON POWDER METALLURGY & PARTICLATE MATERIALS (WORLD CONGRESS PM 2008), 0, 0, - (2008)
  • Ceramic Microarrays for Aggressive Environments, NSTI NANOTECH 2008, 0, 0, - (2008)
  • Effect of Binder System on Mold Filling in Ceramic MicroPIM, PIM 2008 CONFERENCE, 0, 0, - (2008)
  • Characterizing Material Homogeneity in Ceramic Microarrays Fabricated by PIM, PIM 2008 CONFERENCE, 0, 0, - (2008)
  • The effect of Fe atoms on the adsorption of a W atom on W(100) surface, 2008 APS MARCH MEETING, 0, 0, - (2008)
  • Atomistic Scale Study on Effect of Pressure on Densification during Sintering Nano Scale Tungsten Powder, TMS 2008, 0, 0, - (2008)
  • World Record Thermal Conductivity of Nano-Tungsten-Copper Powder, TMS 2008, 0, 0, - (2008)
  • Microstructure and Mechanical Properties of Sponge Ti and Its Alloy Powders with Various Powder Metallurgical Processes, TMS 2008, 0, 0, - (2008)
  • Mechanical Properties of Various Aluminum Alloys by Powder Metallurgy, TMS 2008, 0, 0, - (2008)
  • Process and Material Issues in Ceramic Micro Powder Injection Molding, MOLDING 2008, 0, 0, - (2008)
  • Modeling of Materials Processes – The Difficult Problems with Particulates, INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING TECHNOLOGIES (ICAMT-2007), 0, 0, - (2007)
  • Multiscale Modeling in Powder Metallurgy: Atomistic, Discrete Element, and Finite Element Simulations, UKC (US – KOREA CONFERENCE) 2007, 0, 0, - (2007)
  • Densification and Grain Growth During the Sintering of Nanoscale SiC, TECHNICAL PROCEEDINGS OF THE 2007 NSTI NANOTECHNOLOGY CONFERENCE AND TRADE SHOW (NANOTACH2007/CLEANTECH2007), 0, 0, - (2007)
  • Nanoparticle building blocks for powder injection molded microsystems, TECHNICAL PROCEEDINGS OF THE 2007 NSTI NANOTECHNOLOGY CONFERENCE AND TRADE SHOW (NANOTACH2007/CLEANTECH2007), 0, 0, - (2007)
  • Simulation of Micro Powder Injection Molding, POWDERMET 2007, 0, 0, - (2007)
  • Study on Agglomeration and Brakeage Behaviors of Particles by Discrete Element Method, POWDERMET 2007, 0, 0, - (2007)
  • Simulation of Binder-Powder Separation in Powder Injection Molding, METAL POWDER INDUSTRIES FEDERATION AND APMI INTERNATIONAL, 0, 0, - (2007)
  • Numerical Investigations of Mixing for Powder Injection Molding Feedstock, METAL POWDER INDUSTRIES FEDERATION AND APMI INTERNATIONAL, 0, 0, - (2007)
  • Mechanical and Physical Properties of Titanuim and Silicon Carbide Containing Mixed Powder Sintered Aluminum, PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICLATE MATERIALS (POWDERMET 2007), 0, 0, - (2007)
  • Development of the High Performance W-Cu Electrode, PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICLATE MATERIALS (POWDERMET 2007), 0, 0, - (2007)
  • Microstructure of Tungsten Copper and Model to Predict Thermal Conductivity, PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICLATE MATERIALS (POWDERMET 2007), 0, 0, - (2007)
  • Master Sintering Curve analysis of Liquid-Phase Sintered, Nanoscale Silicon Carbide Fabricated in a Plasma Pressure Compaction System, PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICLATE MATERIALS (POWDERMET 2007), 0, 0, - (2007)
  • Linking Homogenization and Densification in W-Ni-Cu Alloys Through master Sintering Curve (MSC) Concepts, PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICLATE MATERIALS (POWDERMET 2007), 0, 0, - (2007)
  • Studies on the Thermal Stability of Pd/PC Nanocomposites, PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICLATE MATERIALS (POWDERMET 2007), 0, 0, - (2007)
  • Atomistic Simulation for Activated Sintering of Tungsten by Additives, PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICLATE MATERIALS (POWDERMET 2007), 0, 0, - (2007)
  • Thermal Expansion and Viscoelastic Properties of Sintered Porous Ferrous Components, PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICLATE MATERIALS (POWDERMET 2007), 0, 0, - (2007)
  • Novel Methodology to Quantify Tool Wear in Powder Metallurgy, PROCEEDINGS OF THE 2007 INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICLATE MATERIALS (POWDERMET 2007), 0, 0, - (2007)
  • Nanoscale SiC sintered Structures for Advanced Microsystems and Power Electronics Packaging, CICMT 2007, 0, 0, - (2007)
  • Microfulidic Device Design by PIM: CAE Analysis, THE 2007 ASEE GULF-SOUTHWEST ANNUAL CONFERENCE, 0, 0, - (2007)
  • Atomistic Simulation in Powder Metallurgy, MS&T '06, 0, 0, - (2006)
  • Tungsten Heavy Alloys as a Basis for Modeling Deformation in Particulate Composites, ” MS&T '06, 0, 0, - (2006)
  • Model for the Press-Sinter Processing of Ultrafine and Nanoscale Tungsten, Tungsten-Copper, and Tungsten Carbide Cobalt, MS&T '06, 0, 0, - (2006)
  • Modeling of Powder Metallurgy Processes – die compaction, sintering, injection molding, and pressure-assisted sintering, THE 5TH BRAZILIAN MRS MEETING 2006, 0, 0, - (2006)
  • Modeling and Simulation of Sintering Process for Nano-Structured Parts and under Micro-Gravity Condition, ” US-KOREA CONFERENCE 2006, 0, 0, - (2006)
  • Processing of Ceramic Nanoparticles: An Integrated Approach, THE ONAMI MICRO NANO BREAKTHROUGH CONFERENCE (MNBC) 2006, 0, 0, - (2006)
  • Study of Liquid-Phase Sintered, Nanosized Silicon Carbide Fabricated in Plasma Pressure compaction System, THE ONAMI MICRO NANO BREAKTHROUGH CONFERENCE (MNBC) 2006, 0, 0, - (2006)
  • Microminiature Functional Parts by Powder Injection Molding of Metals and Ceramics, WCSE 2006, 0, 0, - (2006)
  • Development of Nano-Tungsten-Copper Powder and PM Processes, 2006 POWDER METALLURGY WORLD CONGRESS, 0, 0, - (2006)
  • Unified Modeling and Simulation for Nano-Structured Tungsten Carbide, PM 2006 POWDER METALLURGY WORLD CONGRESS, 0, 0, - (2006)
  • Material Homogeneity in Ceramic Micro Arrays Fabricated by Powder Injection Molding, 2006 IIE ANNUAL CONFERENCE AND EXHIBITION (2006 IERC), 0, 0, - (2006)
  • Development of Titanium Powder Injection Molding: Experiment and Simulation, PM 2006 POWDER METALLURGY WORLD CONGRESS, 0, 0, - (2006)
  • Various Master Sintering Curve Concepts and Its Applications, PM 2006 POWDER METALLURGY WORLD CONGRESS, 0, 0, - (2006)
  • Technical and Economical Comparison of Micro Powder Injection Molding, PM 2006 POWDER METALLURGY WORLD CONGRESS, 0, 0, - (2006)
  • Special Sintering Technologies for Nano-Structured Tungsten Carbide, POWDERMET, 0, 0, - (2006)
  • Development of Nano-Tungsten-Copper Powder and PM Processes, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2006)
  • Grain Size Measurement and Modeling for Nano-Structured Tungsten Carbide, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2006)
  • Distortion Simulation of Liquid Phase Sintering on Earth, on the Moon, on Mars and in Space, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2006)
  • Master Decomposition Curve for Binders in Die Compaction Processing, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2006)
  • Development of Powder Injection Molding Process for Dental Scaler Tip: Mold Design and CAE Analysis, PIM 2006, 0, 0, - (2006)
  • Development of Nano-Tungsten-Copper Powder and PM Processes, PIM 2006, 0, 0, - (2006)
  • Development of Titanium Powder Injection Molding: Experiment and Simulation, PIM 2006, 0, 0, - (2006)
  • Master Decomposition Curve for Binders in PIM Processing, PIM 2006, 0, 0, - (2006)
  • Technical and Economical Comparison of Micro Powder Injection Molding, PIM 2006, 0, 0, - (2006)
  • Master Decomposition Curve for Binders in PIM Processing, 2006 TMS ANNUAL MEETING & EXHIBITION, 0, 0, - (2006)
  • Novel Approach for Processing of Pure Niobium, REFRACTORY & HARDMETALS VI, 0, 0, - (2006)
  • Prediction of Tungsten Heavy Alloy Density, Size, Shape, and Microstructure in Different Gravitational Environments, REFRACTORY & HARDMETALS VI, 0, 0, - (2006)
  • Model for the Press-Sinter Processing of Automotive Welding Electrodes from Refractory Metal Powders, REFRACTORY & HARDMETALS VI, 0, 0, - (2006)
  • Analysis and Design of Press and Sinter Process for Precise Production of Cemented Carbide Tools, PM ASIA 2005, 0, 0, - (2005)
  • Master Sintering Curve for a two-phase material, SINTERING ‘05, 0, 0, - (2005)
  • Liquid Phase Sintering – Agreement of Experiments and Models, MATERIALS SCIENCE AND TECHNOLOGY 2005, 0, 0, - (2005)
  • Development of Niobium Powder Injection Molding, TIC SYMPOSIUM 2005, 0, 0, - (2005)
  • Powder Injection Molding for Multi-Scale Fabrication, INNOVATIVE MATERIALS, 0, 0, - (2005)
  • Development of Titanium Powder Injection Molding: Experiment and Simulation, INNOVATIVE MATERIALS, 0, 0, - (2005)
  • Case Study for Mold Filling of PIM components: Simulation and Experimental Validation, INNOVATIVE MATERIAL SOLUTIONS, 0, 0, - (2005)
  • Fabricating Ceramic Microfeatures, INNOVATIVE MATERIAL SOLUTIONS, 0, 0, - (2005)
  • Integral Work of Sintering Concepts Applied to Liquid Phase Sintering Densification, Distortion, and Microstructure Evolution, EUROPEAN POWDER METALLURGY ASSOCIATION, 0, 0, - (2005)
  • Critical Learning from Microgravity Sintering of Tungsten Alloys: Implications for extraterrestrial Fabrication and Repair, PLANSEE HOLDINGS, 0, 0, - (2005)
  • Critical Learning from Microgravity Sintering of Tungsten Alloys: Implications for Extraterrestrial Fabrication and Repair, PROCEEDINGS OF THE 2005 INTERNATIONAL CONFERENCE ON POWDER METALLURGY AND PARTICULATE MATERIALS, 0, 0, - (2005)
  • Verifying the Master Sintering Curve on an Industrial Furnace, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2005)
  • Large Metallic Part by PIM, PIM 2004, 0, 0, - (2004)
  • Comparison Study among Plastic, Metal and Ceramic Injection Moldings, INNOVATIVE MATERIAL SOLUTIONS, 0, 0, - (2004)
  • Adaptation of Master Sintering Curve to Sintering of Injection Molded Tungsten Heavy Alloys, PIM 2004, 0, 0, - (2004)
  • Sensitivity Analysis for Powder Injection Molding, INNOVATIVE MATERIAL SOLUTIONS, 0, 0, - (2004)
  • Development of Titanium Feedstock for Powder Injection Molding, PIM 2004, 0, 0, - (2004)
  • Master Sintering Curve Construction Software and its Application, INNOVATIVE MATERIAL SOLUTIONS, 0, 0, - (2004)
  • Powder Injection Molding and Sintering of Carbon-Fiber Metal-Matrix Composites, METAL POWDER INDUSTRIES FEDERATION, 0, 0, - (2004)
  • Master Sintering Curve Construction Software and its Application, INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICULATE MATERIALS, 0, 0, - (2004)
  • Imbalance Filling of Multi-cavity Tooling: A Comparison of Plastics and Metals, INNOVATIVE MATERIALS, 0, 0, - (2003)
  • Sensitivity Analysis & Optimization for PIM of 316L Stainless Steel, PIM 2003, INNOVATIVE MATERIALS, 0, 0, - (2003)
  • The Effects of Mixing on the Mold Filling Characteristics of W-Ni-Fe and 316L Stainless Steel, PIM 2003, 0, 0, - (2003)
  • Environmental Stress Cracking in Thermal-formed ABS of Refrigerator, PROCEEDINGS OF 2003 ANTEC, SPE, 0, 0, - (2003)
  • Avoiding Molding Defects During the PIM of 316L Stainless Steel, INNOVATIVE MATERIALS, 0, 0, - (2003)
  • Effect of Mixing on Feedstock Rheology, INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICULATE MATERIALS, 0, 0, - (2002)
  • Environmental Stress Cracking in Thermal-formed ABS of Refrigerator, CONFERENCE OF THE KOREAN SOCIETY OF RHEOLOGY, 0, 0, - (2002)
  • CAE Analysis for Sintering Stage of Powder Injection Molding, PROCEEDINGS OF PM2TEC 2001, 0, 0, - (2001)
  • Integrated Numerical Analysis of Injection molding Process for PIM Parts, INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICULATE MATERIALS, 0, 0, - (2001)
  • Integrated CAE Analysis for Powder Injection molding: Filling, Packing and Cooling Stages, PROCEEDINGS OF 2001 ANTEC, 0, 0, - (2001)
  • New Manufacturing Method for Light Guide of PMMA, PROCEEDINGS OF 2001 ANTEC, 0, 0, - (2001)
  • Coupled CAE Analysis between Filling and Cooling Stages: Case Study for Powder Injection Molding: Electric Package, PROCEEDINGS OF 2000 PM WORLD CONGRESS, 0, 0, - (2000)
  • Thermal Analysis During Epoxy Casting Process for Joint Units of High Voltage Cable, PROCEEDINGS OF 2000 SPE ANTEC, 0, 0, - (2000)
  • Computer-Aided Engineering in Powder Injection Molding, PROCEEDINGS OF CONFERENCE OF THE KOREAN INSTITUTE OF METAL AND MATERIALS, 0, 0, - (2000)
  • Numerical and Experimental Analysis for Various Properties of Injection Molded Light Guide in LCD Backlight Unit, PROCEDDINGS OF THE SIXTEENTH PPS ANNUAL MEETING, 0, 0, - (2000)
  • Numerical and Experimental Analysis for Various Properties of Optical Films in LCD Backlight Unit, PROCEEDINGS OF THE SIXTEENTH PPS ANNUAL MEETING, 0, 0, - (2000)
  • Thermal Analysis During Epoxy Casting Process for Joint Units of High Voltage Cable, PROCEEDINGS OF MARC USER’S CONFERENCE, 0, 0, - (1999)
  • Development of Injection Molding Technology for High Speed Optical Disk, PROCEEDINGS OF THE FIFTEENTH PPS ANNUAL MEETING, 0, 0, - (1999)
  • Vibration Characteristics and Birefringence of Optical Disk Considering Initial Stress, PROCEEDINGS OF 44TH SPIE, 0, 0, - (1999)
  • Development of Injection Molding Technology for High Speed Optical Disk, PROCEEDINGS OF CONFERENCE OF THE KOREAN SOCIETY OF RHEOLOGY, 0, 0, - (1998)
  • Numerical Analysis of Injection/Compression Molding Process for a Center-Gated Disc, PROCEEDINGS OF PROCEEDINGS OF ’98 SPE ANTEC, 0, 0, - (1998)
  • Experimental Study of Optical Disc Birefringence, PROCEEDINGS OF ’98 SPE ANTEC, 0, 0, - (1998)
  • Development of Injection Molding Technology for High Speed Optical Disk, PROCESSINGS OF INTERNATIONAL WORKSHOP IN DATA STORAGE TECHNOLOGY, 0, 0, - (1998)
  • Numerical Study of Precision Injection/ Compression Molding for Center-Gated Disc, PROCEDDINGS OF CONFERENCE OF KOREAN SOCIETY OF RHEOLOGY, 0, 0, - (1997)
  • Numerical Study of Precision Injection/Compression Molding for Center-Gated Disc, PROCEEDINGS OF IUPAC SYMPOSIUM ON RHEOLOGY AND COMPUTATION, 0, 0, - (1997)
  • Optimum Design of Injection Mold Cooling System Using a BEM, PROCEEDINGS OF THE POLYMER PROCESSING SOCIETY EUROPEAN MEETING, 0, 0, - (1995)
  • Sensitivity Analysis for Injection Mold Cooling System: a BEM Approach, PROCEEDINGS OF THE ELEVENTH PPS ANNUAL MEETING, 0, 0, - (1995)
  • Optimal Design of Mold Cooling System and Optimal Process Condition, PROCEEDINGS OF CONFERENCE OF KOREAN SOCIETY OF MECHANICAL ENGINEERING, 0, 0, - (1995)
  • Sensitivity Analysis for Injection Mold Cooling System: a BEM Approach, PROCEEDINGS OF CONFERENCE OF KOREAN SOCIETY OF MECHANICAL ENGINEERING, 0, 0, - (1995)
  • Development of Computer Aided Engineering System for Injection Mold Cooling, PROCEEDINGS OF CONFERENCE OF KOREAN SOCIETY OF MECHANICAL ENGINEERING, 0, 0, - (1993)

학회발표

  • Development of Powder Injection Molding Process for Micro-sized Piezoelectric Structure with High-Aspect-Ratio, Proceedings of MIM 2018, 0, 0, - (2018)
  • Glass powder injection molding and its application, Proceedingds of 32th glass symposium, 0, 0, - (2017)
  • 압축 비틀림 공정 하에서의 타이타늄 분말의 치밀화 거동 모델링, 제 31회 첨단구조재료 심포지엄, 0, 0, - (2017)
  • Application of Powder Injection Molding Process for Industrial fields, Proceedings of JSPM International Conference on Powder and Powder Metallurgy, 0, 0, - (2017)
  • Nano/Micro Bimodal Powder Injection Molding Process, Proceedings of The Sixth Asia International Symposium on Mechatronics, 0, 0, - (2017)
  • Fabrication of 1-3typed piezoelectric structure using powder injection molding with metallic mold insert via X-ray lithography process, Proceddings of The Sixth Asia International Symposium on Mechatronics, 0, 0, - (2017)
  • Finite Element Analysis of Cornea Mechanical Behavior for Keratoplasty, Prodceedingd of The Sixth Asia International Symposium on Mechatronics, 0, 0, - (2017)
  • Powder injection molded metallic porous structure by using space holder technique, Proceedings of The Sixth Asia International Symposium on Mechatronics, 0, 0, - (2017)
  • FEM simulation for compaction process control, Proceedings of The Sixth Asia International Symposium on Mechatronics, 0, 0, - (2017)
  • High Performance of Fe-3.5Si Sintered Soft Magnetic cores for Actuator Applications Fabricated by Powder Injection Molding process, Proceedingds of The Sixth Asia International Symposium on Mechatronics, 0, 0, - (2017)
  • Fabrication of hydrophobic surgical forceps for minimally invasive surgery using powder injection molding, Proceedings of The Sixth Asia International Symposium on Mechatronics, 0, 0, - (2017)
  • High Performance of Fe-3.5Si Sintered Soft Magnetic cores for Actuator Applications Fabricated by Powder Injection Molding process, Proceedings of The Sixth Asia International Symposium on Mechatronics, 0, 0, - (2017)
  • Powder injection molding of Ti-6Al-4V alloy for defect-free high performance titanium parts with low carbon/oxygen contents, Proceedings of PMTi 2017, 0, 0, - (2017)
  • Influence of Nano Powder on Rheological Behavior of Bimodal Mixture, ., 0, 0, - (2017)
  • Fabrication of metallic porous structure by powder injection molding process and space hold technique, ., 0, 0, - (2017)
  • Discrete Element Method for Crack Propagation under High Pressure and Strain Rate and Potential Applications, ., 0, 0, - (2017)
  • Powder Injection Molded Thin-walled Structure for Heat Dissipation, ., 0, 0, - (2017)
  • The effects of encapsulation for post-HIP on additive manufactured SUS316L powder compacts: mechanical properties and microstructures, ., 0, 0, - (2017)
  • Study for Metal-Ceramic Bonded Part Fabricated using Powder Injection Molding, ., 0, 0, - (2017)
  • Fabrication of Micro-Pattern Structure Using Powder Injection Molding Process with Metallic Mold via LIGA, ., 0, 0, - (2017)
  • Analysis of the Homogeneity and Rheological Behavior of Nano/Micro Bimodal feedstock, ., 0, 0, - (2017)
  • Fabrication Of Sintered Fe-3.5Si Soft Magnet for AC Application By Powder Injection Molding, ., 0, 0, - (2017)
  • Material Informatics using Experiments and Simulations in Powder Metallurgy, ., 0, 0, - (2017)
  • Physics of Pressure Transmission in Powders, ., 0, 0, - (2017)
  • Regional Overview of MIM in Korea, ., 0, 0, - (2017)
  • Investigation of bonding behavior of brazed sus304 and ni-baed filler metal, ., 0, 0, - (2017)
  • Advanced parts prepared by powder injection molding : Micro piezoelectric structure and metal-ceramic bonded part, ., 0, 0, - (2017)
  • Fabrication of a Micro-Pattern Mold Insert with High Aspect Ratio Using X-ray Lithography Technology, ., 0, 0, - (2016)
  • Development of a Micro Patterned Mold Insert with High Aspect Ratio via LIGA Process, ., 0, 0, - (2016)
  • Entrepreneurial Engineering Education for Technology Based Startup, ., 0, 0, - (2016)
  • Powder Injection Molding of Ceramic components, ., 0, 0, - (2016)
  • Modeling, Simulation and IoT for Fe Based Powder Processing, ., 0, 0, - (2016)
  • Hot Isotropic Pressing of STS316L Powder Compacts: Experimental and Numerical Analysis, ., 0, 0, - (2016)
  • Modeling, Simulation and IoT for Fe Based Powder Processing, ., 0, 0, - (2016)
  • Development Of Manufacturing Technology For The Fabrication Of High-Aspect-Ratio Piezoelectric Structures Using Micro-Powder Injection Molding, ., 0, 0, - (2016)
  • Analysis of Nano powder Effect in Nano/Micro Bimodal Feedstock on Powder Injection Molding Process, ., 0, 0, - (2016)
  • Development and Optimization of Powder Injection Molding Process for Fabrication of Low Carbon/Oxygen Content Ti-6Al-4V Part, ., 0, 0, - (2016)
  • Study of Temperature Distribution of Sintering Furnace and Its effect on Sintering of SUS316L Powder Compacts using Finite Element Methods, ., 0, 0, - (2016)
  • Fabrication of Metal-Ceramic Bonded Part Using Powder Injection Molding, ., 0, 0, - (2016)
  • Development of regression model for iron powder compaction considering on particle size distribution and copper contents effect, ., 0, 0, - (2016)
  • Atomistic Simulation of Sintering Mechanism for Copper Nano-powders: Effects on the Crystalline Misalignment, ., 0, 0, - (2016)
  • Fundamental Experiments for Fabrication of Copper Micro Heat Pipe by Powder Injection Molding, ., 0, 0, - (2016)
  • The Effect Of FeP Addition To Fe Based Soft Magnetic Powder Injection Molding, ., 0, 0, - (2016)
  • Molecular Dynamics Simulation of Deformation Behavior of Tungsten-Copper Alloy under High Strain Rate and High Temperature, ., 0, 0, - (2016)
  • Manufacturing of High-Performance/Low-Cost Ti-6Al-4V Parts vis Powder Injection Molding, ., 0, 0, - (2016)
  • Powder Injection Molding Process with Nano/Micro Bimodal Powder, ., 0, 0, - (2016)
  • Sintering Modelling of Copper Powders: Bridge to Mesoscale Simulation from the Atomistic Simulation, ., 0, 0, - (2016)
  • Study of Cornea Mechanical Behavior for Keratoplasty using Finite Element Methods, ., 0, 0, - (2016)
  • Development of Discrete Element Method to Model Deformation/Fracture Behaviors of Materials with Large Deformation, ., 0, 0, - (2016)
  • Simulation and Its Applications on Powder Injection Molding, ., 0, 0, - (2016)
  • Investigation on Manufacturing Technology for Piezoelectric Ceramic Structure using Powder Injection Molding, ., 0, 0, - (2016)
  • Digital Manufacturing & Design for Powder Injection Molding, ., 0, 0, - (2016)
  • Binder Jetting of Metals and Ceramics, ., 0, 0, - (2016)
  • Impact on the World through Creationism in Engineering, ., 0, 0, - (2016)
  • Fabrication of Tungsten Alloy Parts Based on Powder Processing Technologies for High Temperature Applications, ., 0, 0, - (2016)
  • Simulation and Its Applications in Powder Injection Molding, ., 0, 0, - (2016)
  • Sensitivity analysis for iron powder compaction considering powder design parameters, ., 0, 0, - (2016)
  • Effect of Nano Powder in Bimodal Feedstock on Powder Injection Molding Process, ., 0, 0, - (2016)
  • Study of Temperature Distribution of Sintering Furnace and Its Effect on Sintering of Powder Compacts using Finite Element Methods, ., 0, 0, - (2016)
  • Fabrication and warpage control of powder injection molded thin-walled structure, ., 0, 0, - (2016)
  • Injection molding of Ti-6Al-4V powders: Experimental and numerical analysis, ., 0, 0, - (2016)
  • Sintering mechanism of nanoscale copper powder: effects on the crystalline misalignment, ., 0, 0, - (2016)
  • The Effect Of FeP Addition To Fe Based Soft Magnetic Powder Injection Molding, ., 0, 0, - (2016)
  • Fabrication of micro piezoelectric structure using powder injection molding process via LIGA based metallic mold, ., 0, 0, - (2016)
  • Novel Powder Injection Molding: Experiments and Simulation, ., 0, 0, - (2016)
  • A Yield Criterion for Single Crystal Copper Subjected to High Strain Rates for a Multiscale Simulation, ., 0, 0, - (2016)
  • Fabrication of high-aspect ratio micro PZT arrays using powder injection molding, ., 0, 0, - (2015)
  • Fabrication of Piezoelectric Artificial Hair Cell Sensor using Powder Injection Molding Technology, ., 0, 0, - (2015)
  • Development of Hydrophobic Surgical Forceps for Laparoscope Operation or Minimally Invasive Surgery using Powder Injection Molding and Surface Treatment, ., 0, 0, - (2015)
  • Effects of wax content in a wax-polymer binder system on titanium powder injection molding, ., 0, 0, - (2015)
  • Investigation of Manufacturing Technology for the Micro PZT Structure using Powder Injection Molding with X-ray Micromachined Sacrificial Mold Insert, ., 0, 0, - (2015)
  • Modeling of Magnetic Particle Orientation in Magnetic Powder Injection Molding, ., 0, 0, - (2015)
  • Prediction of friction coefficient for discrete element modeling of closed-die compaction of stainless steel powders, ., 0, 0, - (2015)
  • development of powder injection molded micro-thermosyphon with high aspect ratio, ., 0, 0, - (2015)
  • Study of Temperature Distribution of Sintering Furnace and Its Effect on Sintering of Iron Powder Compacts using Finite Element Methods, ., 0, 0, - (2015)
  • Development of regression model for iron powder compaction considering on particle size distribution and copper content effect, ., 0, 0, - (2015)
  • Development of powder injection molding process for fabrication of metal-ceramic bonded part, ., 0, 0, - (2015)
  • Effect of Nano-Micro Bi-modal Powder on Powder Injection Molding Process of SUS316L, ., 0, 0, - (2015)
  • Development of Surgical and Piezoelectric Devices Using Powder Injection Molding Process, ., 0, 0, - (2015)
  • Fabrication of Precision Parts Using Powder Injection Molding, ., 0, 0, - (2015)
  • Rheological and Thermal Behavior of Powder-Binder Mixture for Titanium Powder Injection Molding, ., 0, 0, - (2015)
  • Fabrication and Characterization of Ti-6Al-4V Feedstock for Titanium Powder Injection Molding, ., 0, 0, - (2015)
  • Current Research Activities and Future of Powder Injection Molding, ., 0, 0, - (2015)
  • Optimization of Ti-6Al-4V Feedstock for Titanium Powder Injection Molding, ., 0, 0, - (2015)
  • Effect of nano powder ratio of bimodal powder mixture on powder injection molding, ., 0, 0, - (2015)
  • Modeling of Magneto-Rheological Behavior of Powder Injection Molding Feedstoc, ., 0, 0, - (2015)
  • Importance of Mixing in Powder Injection Molding, ., 0, 0, - (2015)
  • Rheological behavior of Bi-modal SUS316L feedstock for Powder Injection Molding, ., 0, 0, - (2015)
  • Powder-Binder Separation in Powder Injection Molding Process, ., 0, 0, - (2015)
  • Numerical Simulation on Particulate Flows with Permanent Magnetic Particles Suspended in a Viscous Fluid, ., 0, 0, - (2015)
  • Modelling of Collision Behaviors of Particles Using Discrete Element Method, ., 0, 0, - (2015)
  • Characterization of Ti-6Al-4V Feedstock for Titanium Powder Injection Molding, ., 0, 0, - (2015)
  • Development of Biomimetic Artificial Hair Cell for Underwater Acoustic Vector Hydrophone using Powder Injection Molding Technology, ., 0, 0, - (2015)
  • Analysis of Compaction and Sintering Behavior for Nano/Micro Bi-modal Powder, ., 0, 0, - (2015)
  • Analysis of Compaction and Sintering Behavior of Stainless Steel 316L Bi-Modal Powder, ., 0, 0, - (2015)
  • Finite Element Simulation of PM Gear Rolling Process and Sensitivity Analysis for its Densification Behavior, ., 0, 0, - (2015)
  • Analysis of Iron Powder Design for Sintering Process, ., 0, 0, - (2015)
  • Development of Ti-6Al-4V Feedstock for Titanium Powder Injection Molding, ., 0, 0, - (2015)
  • Development of Powder Injection Molding Technology for Micro PZT Structure in Medical Ultrasound Probe, ., 0, 0, - (2015)
  • Powder-Binder Separation Behavior for Powder Injection Molding Process, ., 0, 0, - (2015)
  • Fabrication of Medical Device Parts in Ultrasound Probe and Robotic Surgical by μ-Powder Injection Molding, ., 0, 0, - (2015)
  • Investigation of Manufacturing Technology for the Micro PZT Structure using Powder Injection Molding with X-ray Micromachining, ., 0, 0, - (2014)
  • The effect of applying magnetic field to the mold cavity during powder injection molding of SrFe12O9, ., 0, 0, - (2014)
  • Investigation of Powder-Binder Separation in Powder Injection Molding Process, ., 0, 0, - (2014)
  • Development of Hydrophobic Forcep for Robot Surgery, ., 0, 0, - (2014)
  • A comprehensive viscosity model for micro magnetic particle dispersed in silicon oil, ., 0, 0, - (2014)
  • Uniaxial/Triaxial Compression Test of Concrete by Using DEM, ., 0, 0, - (2014)
  • Yield Criteria of High Temperature and High Temperature Materials for Multiscale Simulation, ., 0, 0, - (2014)
  • Simulation for Deformation Behavior of Taylor Test by Using FEM and MPM, ., 0, 0, - (2014)
  • Simulation for Double Plate Impaction Behavior with Different Aspect Ratio by Using FEM and SPH, ., 0, 0, - (2014)
  • Development of Surgical Device using Powder Injection Molding, ., 0, 0, - (2014)
  • Effects of Particle Sizes on Rheological Behavior of 316L Stainless Steel Feedstock, ., 0, 0, - (2014)
  • Oscillatory rheology of magnetic powder mixture for powder injection molding, ., 0, 0, - (2014)
  • Development of Micro PIM Components for Robot Surgery, ., 0, 0, - (2013)
  • Molecular Dynamics Simulation of the Tensile Test for nano-scale copper columns, ., 0, 0, - (2013)
  • Fabrication of Cutting Tool Tip for Sand-casting by Powder Injection Molding, ., 0, 0, - (2013)
  • Development of hot isostatic pressing process using stainless steel for power plant, ., 0, 0, - (2013)
  • Research Trends in PIM, ., 0, 0, - (2013)
  • PIM: Basics and Applications, PROCEEDING OF PM CONFERENCE 2012 – INDIA, 0, 0, - (2012)
  • Development of HIPing Technology Using Stainless Steel for Power Plant, ., 0, 0, - (2012)
  • Sintering Test of Nuclear Fuel Oxides Using Surrogated Powder CeO2, ., 0, 0, - (2012)
  • Development of HIPing Technology Using Stainless Steel for Power Plant, ., 0, 0, - (2012)
  • Sintering Test of Nuclear Fuel Oxides Using Surrogated Powder CeO2, ., 0, 0, - (2012)
  • Bone Tissue Regeneration using Bioactive Ceramic Scaffolds, ., 0, 0, - (2012)
  • Issues and Trends in Powder Injection Molding; Research and Applications, ., 0, 0, - (2011)
  • Bio-Inspired Design, Design Flexibility, and Micro-Manufacturing: Turtle Shell, Bighorn Ram and Bamboo, ., 0, 0, - (2010)
  • Bio-Inspired Design, Design Flexibility, and Micro-Manufacturing: Turtle Shell, Bighorn Ram and Bamboo, ., 0, 0, - (2010)
  • Fabrication of Bio-Inspired Design Engineering Components by Powder Metallurgy, ., 0, 0, - (2009)
  • Mixing of nanoscale powders and polymers for micro-powder injection molding: Simulation study, ., 0, 0, - (2009)
  • Granularity Issues in Computer Simulations supporting micro-PIM, ., 0, 0, - (2009)
  • Atomistic Simulation of Nanoparticle Sintering, ., 0, 0, - (2009)
  • Material Homogeneity in PIM: Characterization & Simulation, ., 0, 0, - (2009)
  • Granularity Issues in Computer Simulations supporting micro-PIM, ., 0, 0, - (2009)
  • Mixing of nanoscale powders and polymers for micro-powder injection molding: Simulation study, ., 0, 0, - (2009)
  • Atomistic Simulation of Nanoparticle Sintering, ., 0, 0, - (2009)
  • Material Homogeneity in PIM: Characterization & Simulation, ., 0, 0, - (2009)
  • Benefits to Industry from Simulation of Polymer Processing: Cost Reduction and Quality Improvement, ., 0, 0, - (2008)
  • Innovation Mechanism and Research Planning & Management in Polymer Processing, ., 0, 0, - (2001)
  • Innovation Mechanism and Research Planning & Management in Polymer Processing, ., 0, 0, - (2001)
  • New Education System for Engineering Industry by Using the Internet, ., 0, 0, - (2000)
  • New Education System for Engineering Industry by Using the Internet, ., 0, 0, - (2000)
  • Development of Injection Molding Technology for High Speed Optical Disk, ., 0, 0, - (1998)

단행본

  • Advanced in Powder Metallurgy, Woodhead Publishing, , (2013)
  • Science and Engineering: I would know that way at that time, Planet B Publication, , (2013)
  • Sintered Nanoscale Powders in Applications of Nanomaterials, American Scientific Publishers, , (2013)
  • Handbook of Metal Injection Molding, Woodhead Publishing Limited, 540, (2012)
  • Make Your History, (주)행성비, , 박성진 (2011)
  • Advances in Sintering Science and Technology, The American Ceramic Society, , (2010)
  • Advances in Sintering Science and Technology, The American Ceramic Society, , 박성진 (2010)
  • ASM Handbook Volume 22B: Metals Process Simulation, ASM International, , 박성진 (2010)
  • Handbook of Mathematical Relations in Particulate Materials Processing: Ceramics, Powder Metals, Cermets, Carbides, Hard Materials, and Minerals, John Wiley & Sons, Inc., , (2008)
  • COMPUTER AIDED AND INTEGRATED MANUFACTURING SYSTEMS, World Scientific Publishing Company, , (2004)
  • 최신 광정보저장기술, 문운당, , (2002)
  • 사출성형CAE설계지침, 문운당, , (2001)

연구실적

  • 인건비풀링과제, 포항공과대학교 (2006-2015)
  • 자체연구개발과제, 포항공과대학교 (2006-2016)
  • 미세 분말사출성형 피드스탁의 유변학적 거동, 포항공과대학교 (2009-2010)
  • [GENESIS]THERMAL MANAGEMENT DESIGN SYSTEM IN ELECTRONIC CHIPS, (주)포스코 (2010-2010)
  • LED 조명 냉각 기술 조사, 포항공대산학협력단 (2010-2010)
  • 미세 분말사출성형 피드스탁의 유변학적 거동, 포항공과대학교 (2010-2011)
  • 높은 전단변형률 하에서의 나노분발과 바인더 혼합체의 분리현상 규명, 포항공과대학교 (2010-2011)
  • ROLLING에 의한 PM GEAR의 치밀화 예측 S/W 개발, 대한소결금속(주) (2010-2011)
  • 플라스틱 사출성형공정에서의 미세입자의 거동, 엘지전자(주) (2010-2010)
  • CMF 관련 신재료 및 가공 공법에 대한 TECHNOLOGY TREND SURVEY, 엘지전자(주) (2010-2010)
  • 초고온 비삭마 로켓 노즐목재의 특성연구, 국방과학연구소 (2010-2012)
  • 분말사출성형을 이용한 초정밀/초소형 영구자석 제조 기반기술 개발, 재단법인한국연구재단 (2010-2011)
  • (학생)인건비풀링과제, 포항공대산학협력단 (2010-2020)
  • TIH2 분말을 이용한 P/M 부품 평가 및 제조, (주)포스코 (2010-2011)
  • TIH2 분말을 이용한 P/M 부품 평가 및 제조, (주)포스코 (2010-2011)
  • TIH2 분말을 이용한 P/M 부품 개발, 포항공대산학협력단 (2010-2011)
  • ROLLING에 의한 PM GEAR의 치밀화 예측 S/W 개발 (2), 대한소결금속(주) (2011-2012)
  • 패턴리스 선진 성형 기술 및 장비 연구 개발, 재단법인한국연구재단 (2011-2012)
  • 세라믹-금속 접합 부품 제조를 위한 분말사출성형 공정 개발, 엘지전자(주) (2011-2011)
  • 분말사출성형을 이용한 초정밀/초소형 영구자석 제조 기반기술 개발, 재단법인한국연구재단 (2011-2012)
  • 초내열합금의 분말사출성형 공정 CAE 해석기술 개발, 국방과학연구소 (2011-2013)
  • 4.5869_1차년도 이월과제, 재단법인한국연구재단 (2011-2012)
  • [STSC]발전소용 STAINLESS STEEL의 고온정수압공정(HIP)개발, (주)포스코 (2011-2012)
  • POSCO LIAISON PROGRAM 운영, 포스코신기술연구조합 (2012-2012)
  • 유리 분말사출성형 공정 개발, 삼성전자(주) (2012-2012)
  • 패턴리스 선진 성형 기술 및 장비 연구 개발, 재단법인한국연구재단 (2012-2013)
  • 2012년 포항시 창업보육센터 운영비 보조금, 포항시청 (2012-2012)
  • 입자모델기반 멀티스케일 해석기법 연구(HH-2), 한국과학기술원 (2011-2013)
  • 2012년 창업보육센터 중기청 보조금, 대구.경북지방중소기업청 (2012-2012)
  • 2012년 경상북도 우수창업보육센터 조성사업 보조금, 경북도청 (2012-2012)
  • 2012년 경상북도 우수창업보육센터 조성사업 보조금, 경상북도청 (2012-2012)
  • (학부생프로그램-기계-유태종)햅틱 기술 기반 수술용 로봇에 사용할 END-EFFECTOR 연구, 포항공과대학교 (2012-2013)
  • 소결 등방수축을 위한 FEEDSTOCK내 분말 최적화 설계기술 개발, 한국생산기술연구원 (2012-2013)
  • DEVELOPMENT OF GAS-ASSISTED SINTERING SIMULATION FOR PT-ZR ALLOY, (주)썸백엔지니어링 (2012-2013)
  • 분말사출성형을 이용한 초정밀/초소형 영구자석 제고 기반기술 개발, 재단법인한국연구재단 (2012-2013)
  • 4.7314/7625_2차년도 이월과제, 재단법인한국연구재단 (2012-2013)
  • 포스코기술연계프로그램운영, 주식회사 포스하이메탈 (2013-2014)
  • FE-분말 소결 부품의 물성 예측 고유 기술 개발, (주)포스코 (2013-2013)
  • FE_분말 소결부품의 물성예측 고유 기술개발, 포항공대산학협력단 (2013-2013)
  • 2013년 포항시 창업보육 보조금, 포항시청 (2013-2013)
  • S_직접비_박성진, 포항공과대학교 (2013-2020)
  • 패턴리스 선진 성형 기술 및 장비 연구 개발, 재단법인한국연구재단 (2013-2014)
  • 2013 경상북도 우수창업보육센터 보조금, 경북도청 (2013-2013)
  • 2013년 창업보육센터 중기청 운영비, 대구.경북지방중소기업청 (0000-0000)
  • 분말공정 수치모사를 이용한 분말설계 알고리즘 연구, 재단법인한국연구재단 (2013-2014)
  • 소결 등방수축을 위한 FEEDSTOCK내 분말 최적화 설계기술 개발, 한국생산기술연구원 (2013-2014)
  • S_간접비_박성진, 포항공과대학교 (2013-2020)
  • 티타늄 합금 전용 PIM 피드스탁 개발 및 CAE 개발을 위한 물성계측, (주)쎄타텍 (2013-2014)
  • 4.9946_인건비 집행과제, 대구.경북지방중소기업청 (2013-2014)
  • 2013년 창업보육센터 중기청 운영비, 대구.경북지방중소기업청 (2013-2014)
  • APGC 컨소시움 내부 운영 과제, 주식회사 알티캐스트 (2013-2014)
  • 2013년 창업보육센터 건립지원사업(리모델링), 포항공과대학교 산학협력단 (2013-2014)
  • FE-분말 소결부품 물성 예측 고유기술 개발, (주)포스코 (2014-2014)
  • 포스코기술연계프로그램운영, (주)포스코플랜텍 (2014-2015)
  • 미래를 위한 새로운 대학교 연구 및 교육 MODEL 창출, 주식회사 테라클 (2014-2015)
  • 기초연구 우수성과에 대한 추적 분석을 통한 국가연구개발사업의 성과활용 강화 전략 수립, 재단법인한국연구재단 (2014-2014)
  • 2014년 창업보육센터 중기청 운영비, 대구.경북지방중소기업청 (2014-2015)
  • 2014년 포항시 창업보육센터 보조금, 포항시청 (2014-2014)
  • 기술사업화 협력 네트워크 구축 및 운영, 재단법인한국연구재단 (2014-2015)
  • 4.8636_이월과제, 한국생산기술연구원 (2013-2014)
  • 분말공정 수치모사를 이용한 분말설계 알고리즘 연구, 재단법인한국연구재단 (2014-2015)
  • UD140011GD_입자모델기반 멀티스케일 해석기법연구, 한국과학기술원 (2014-2016)
  • 티타늄 합금 전용 PIM 피드스탁 개발 및 CAE 개발을 위한 물성계측, (주)쎄타텍 (2014-2015)
  • 티타늄 합금 전용 PIM 피드스탁 개발 및 CAE 개발을 위한 물성계측, 주식회사 쎄타텍 (2014-2015)
  • 소결 등방수축을 위한 FEEDSTOCK내 분말 최적화 설계기술 개발, 한국생산기술연구원 (2014-2015)
  • 4.9850의 이월과제, 재단법인한국연구재단 (2014-2015)
  • 4.9932_이월과제, (주)쎄타텍 (2014-2015)
  • SLAB HEATER 보열로 재질 및 구조설계, (주)포스코 (2014-2015)
  • MEMS 기술 및 분말사출성형을 이용한 마이크로 구조체 제작 기술에 관한 연구, 국방과학연구소 (2014-2017)
  • FE분말 물성 DB를 활용한 최적공정 조건 도출 연구, (주)포스코 (2015-2015)
  • 포스코기술연계프로그램운영, (주)포스코아이씨티 (2015-2016)
  • 기술사업화 협력 네트워크 구축 및 운영, 재단법인한국연구재단 (2015-2016)
  • 2015년 창업보육센터 중소기업청 운영비, 대구.경북지방중소기업청 (2015-2016)
  • 분만사출 성형공정 최적화 기술지원서 제작 용역, 미래창조과학부 (2015-2015)
  • 2015년 포항시 창업보육센터 보조금, 포항시청 (2015-2015)
  • 분말공정 수치모사를 이용한 분말설계 알고리즘 연구, 재단법인한국연구재단 (2015-2016)
  • 중국기계과학기술연구원(CAM) 자문과제, 기타기관 (2015-2015)
  • 한국형 아이코어 지원사업 POSDREAM(임동국), 재단법인한국연구재단 (2015-2015)
  • PZT FABRICATION FOR MATRIX TRANSDUCER MANUFACTURED BY MICRO-CIM, 기타기관 (2015-2016)
  • 티타늄 합금 전용 PIM 피드스탁 개발 및 CAE 개발을 위한 물성계측, 주식회사 쎄타텍 (2015-2016)
  • [G/S]초정밀 자석부품 대량생산을 위한 분말사출성형 영구 자석 분말 배향 해석, (주)포스코 (2015-2016)
  • 고 가반하중, 저가 중소 제조업용 로봇제작을 위한 감속기 일체형 모터 기술개발, 기타기관 (2015-2016)
  • 자체연구개발과제[2015년 신설], 포항공과대학교 (2015-2033)
  • 4.11062_이월과제, 재단법인한국연구재단 (2015-2016)
  • 4.11270_이월과제, 주식회사 쎄타텍 (2015-2016)
  • 바이모달 NANO/MICRO 분말의 소결 모델 개발, 한국생산기술연구원 (2015-2016)
  • COMPUTATIONAL ANLALYSIS OF VANE LEVER INJECTION MODELING, 미래메탈테크(주) (2015-2015)
  • 미래메탈테크 연구용역 과제, 미래메탈테크(주) (2015-2016)
  • 포스코기술연계프로그램운영, (주)포스코에너지 (2016-2017)
  • 2016년 포항시 창업보육센터 보조금, 포항시청 (2016-2016)
  • 2016년도 창업보육센터 운영보조금, 대구.경북지방중소기업청 (2016-2017)
  • 4.12195_이자과제, 대구.경북지방중소기업청 (2015-2016)
  • 2016년 경상북도 우수창업보육센터 지원사업, 경북도청 (2016-2016)
  • 금속 및 세라믹 마이크로 구조체 부품 제조를 위한 패턴 폭 150㎛이하 고종횡비 분말사출 금형 및 성형기술개발, 산업자원부 (2016-2016)
  • 고 가반하중, 저가 중소 제조업용 로봇제작을 위한 감속기 일체형 모터 기술개발, 기타기관 (2016-2017)
  • POSCO와 POSTECH의 산학협력 성과정리 및 향후마스터플랜 수립(정산, 예산조정함), (주)포스코 (2016-2017)
  • [G/S3차]분말사출성형 기술에 기반한 다공성 구조체 설계 및 제작 기술 연구, (주)포스코 (2016-2017)
  • 가치창출대학에 대한 철학 및 개념 확립을 위한 선행연구, 포항공과대학교 (2016-2017)
  • ANNEALING 시 VISCOELASTIC MATERIAL FILM 의 STRESS 거동 변화에 대한 해석 및 CALIBRATION, 에스케이하이닉스 주식회사 (2016-2017)
  • (2차) 바이모달 NANO/MICRO 분말의 소결 모델 개발, 한국생산기술연구원 (2016-2017)
  • PIM 공법에 의한 베어링용 세라믹 볼 제조 공정 개발, (주)한국전자재료 (2016-2017)
  • 조건적중율 60%이상의 인공지능형 사출성형 시스템 개발, 한국산업기술평가관리원 (2016-2017)
  • EMC 소재혼합 및 공정중 UNIFORMITY 관리기술 개발, 삼성전자(주) (2017-2017)
  • EMC 소재 혼합 및 공정 중 균일도 관리기술 개발, 삼성전자(주) (2017-2017)
  • 포스코기술연계프로그램운영, (주)포스코에너지 (2017-2017)
  • 배터리 열 해석 및 최적화 냉각 방식 구조에 대한 연구, 주식회사 피엠그로우 (2017-2017)
  • 4.13686 이자과제, 경북도청 (2016-2016)
  • 4.13271 이자과제, 포항시청 (2016-2016)
  • 금속 및 세라믹 마이크로 구조체 부품 제조를 위한 패턴 폭 150㎛이하 고종횡비 분말사출 금형 및 성형기술개발, 산업자원부 (2017-2018)
  • 2017년 포항시 창업보육센터 보조금, 포항시청 (2017-2017)
  • MLCC 바인더 가소 공정에 대한 MECHANISM 규명 및 CAE TOOL 개발, 삼성전기㈜ (2017-2018)
  • 고 가반하중, 저가 중소 제조업용 로봇제작을 위한 감속기 일체형 모터 기술개발, 한국산업기술평가관리원 (2017-2018)
  • LOW COST 2-2 PZT COMPOSITE FABRICATION BY PIM(POWDER INJECTION MOLDING), 지멘스 헬스케어 주식회사 (2017-2018)
  • 조건적중율 60%이상의 인공지능형 사출성형 시스템 개발, 한국산업기술평가원 (2017-2018)
  • (2차) PIM 공법에 의한 베어링용 세라믹 볼 제조 공정 개발, (주)한국전자재료 (2017-2018)
  • (광양) AI를 이용한 연주기 2차냉각 및 세그먼트 갭 제어 방법, (주)포스코 (2018-2018)
  • 머신러닝 기반 팀 스포츠 액티비티 구별 알고리즘 개발, 주식회사 핏투게더 (2018-2018)
  • [4.16132_기술개발비]AI를 이요한 연주기 2차냉각 및 세그먼트 갭 제어방법, 포항공대산학협력단 (2018-2018)
  • AI를 이용한 CEM 연연속압연 CHATTERING 학습 모델 개발, (주)포스코 (2018-2018)
  • [4.16258_기술개발비]AI를 이용한 CEM 연속압연 CHATTERING 학습 모델 개발, 포항공대산학협력단 (2018-2018)
  • (3차)금속 및 세라믹 마이크로 구조체 부품 제조를 위한 패턴 폭 150㎛이하 고종횡비 분말사출 금형 및 성형기술개발, 산업자원부 (2018-2018)
  • 인공지능 기반 스포츠 빅데이터 분석 알고리즘 및 원천기술 개발, 기타기관 (2018-2019)
  • 2018년 산학협력우수사례 경진대회 장려상 수상, 포항공과대학교 (2018-2019)

IP

  • 박성진,백종원,양우석,윤진철,허민재, 3 차원 반도체 소자의 제조를 위한 웨이퍼-레벨 변형 예측 방법, 한국, 10-2018-0174272 (2018)
  • 박성진,갈창우,이지열,박용현, 금속-세라믹 접합 복강경 수술 겸자 및 이의 제조방법, 한국, 10-2018-0064195 (2018)
  • 박성진,한준세,LINDONGGUO, 전극 삽입형 분말사출성형을 이용한 적층형 압전 소자 및 그 제조 방법, 한국, 10-2014-0154219 (2014)
  • 박성진,한준세,LINDONGGUO, 전극 삽입형 분말사출성형을 이용한 적층형 압전소자 제조방법 및 그에 의해 제조된 적층형 압전 소자, 한국, 10-2014-0154219 (2014)
  • 박성진,박동용,유태종,이우정, 복강경 수술용 클립 제거기 및 그 제조방법, 한국, 10-2014-0000107 (2013)
  • 박성진,박동용,유태종,이우정, 복강경 수술용 클립 제거기 및 그 제조방법, 한국, 10-2014-0000107 (2013)
  • 박성진,박동용,유태종,이우정,이지열, 복강경 수술용 겸자 및 그 제조방법, 한국, 10-2014-0001613 (2013)
  • 박성진,박동용,유태종,이우정,이지열, 복강경 수술용 겸자 및 그 제조방법, 한국, 10-2014-0001613 (2013)
  • 박성진,유승규,황운봉,김동식,조한륜, 친수성 및 소수성 표면으로 처리한 히트파이프, 한국, 10-2013-0166433 (2013)
  • 박성진,정임두, 3차원프린터에 의해 제조된 금형을 이용한 분말사출성형장치 및 그에 의한 분말사출성형 방법, 한국, 10-2013-0097781 (2013)
  • 박성진,정임두, 3차원프린터에 의해 제조된 금형을 이용한 분말사출성형장치 및 그에 의한 분말사출성형방법, 한국, 10-2013-0097781 (2013)
  • 박성진,정임두, 분말야금용 미세분말의 자기적 배열을 이용한 미세구조물 제조방법, 한국, 10-2013-0024277 (2013)
  • 박성진,정임두, 분말야금용 미세분말의 자기적 배열을 이용한 미세구조물 제조방법, 한국, 10-2013-0024277 (2013)
  • 김동식,서창호,박성진,임승민,안상준,박세준,이주영,박재정,차정윤, 레이저 포인터, 한국, 10-2011-0131180 (2011)
  • 김동식,서창호,박성진,임승민,안상준,박세준,이주영,박재정,차정윤, 레이저 포인터, 한국, 10-2011-0125198 (2011)
  • 김동성,이봉기,박성진,박성제, 롤 형상의 마이크로 몰드 시스템 및 그 제조 방법 방법, 한국, 10-2010-0114513 (2010)
  • 김동성,이봉기,박성진,박성제, 롤 형상의 마이크로 몰드 시스템 및 그 제조 방법 방법, 한국, 10-2010-0114513 (2010)
  • 김동성,이봉기,박성진,박성제, 롤 형상의 마이크로 몰드 시스템 및 그 제조 방법 방법, 한국, 10-2010-0114513 (2010)
  • 박성진,권태헌,이봉기, 미세유체 칩 용 연결 방법 및 초소형사출성형을 이용한 제작 방법, 한국, 10-2008-0030592 (2008)